Protect S100: Advanced Port Replicator/Docking Station

Similar Questions

• Port Replicator/Docking Station for Portege M700

  I'm trying to find a docking station or port replicator port for my portege M700 tablet with no luck so far.

  Ideally, I want something that costs at least 4 ports USB, VGA, audio and LAN.

  Any suggestions please?

  Hello

  You can use the Express Port Replicator Docking Station PA3508E-1PRP part number.
  It should be compatible with your Portege M700

  You know the Dynadock? This pretty s toy and provides different ports.
  For example the Dynadock DVI (PA3542E-2PR) supports video output from DVI port and Dynadock VGA (PA3541E-1PRP) supports the VGA instead of DVI port.

  You can use all these 3 devices with M700

  Check it out

• Port replicator / Docking station for smoker Pro 4600

  Hi all

  Anyone would be skillfully to provide me with info on what docking stations / port replicator is available for Satellite Pro 4600?

  I try to search the product section but for this model, the variety of the replicators has displayed, sometimes showing those compatible with the Tecra series.

  I need preferably a docking stereo inputs / outputs Sockets...

  Thanks a lot for your help.

  Matthew.

  Hello

  Check out this link. You'll find all compatible and supported the port replicator and docking stations.
  http://www.Toshiba-Europe.com/BV/computers/products/notebooks/satellitepro4600/docking.asp

  Docking stations are designed also for an another unit models. For example a certain units Tecra

  Good bye

• Tecra M3 and Advanced Port Replicator III: not recognized as docking station

  Hello!

  Just install my new M3 and Advanced Port Replicator III. Everything works fine, but the Port Replicator is not recognized as a Docking Station (No disconnect in menu button start XP; pressing disconnect button on the Port Replicator itself has no effect either).

  Is TI WHEREAS behavior?
  Thank you in advance.

  Hello

  You reinstall the unit with the recovery CD?
  As far as I know that the TOSHIBA Mobile Extension3 for Windows XP is responsible for the good condition of the market of the docking station.
  Well, I recommend to reinstall this driver and utility.
  Perhaps the installation of the new driver will solve this problem.

  Good bye

• Replicator port or docking station for Satellite L20

  Hello
  Can someone tell me if a Replicator port or docking station, there are satellite pro L20 model?
  I searched around, and every time I check the specifications of compatibility, it is usually a Toshiba laptop or 2 and often some of the satellites 'L' series, but no mention of the L20.

  Thanks for any help you can give.

  Hello

  I agree with Akuma.
  You may not use a dock under Satellite L20.
  If you take a glance at the bottom of the device, you will not find a necessary home slot that would be needed to connect the docking station.

  But of course you can use some sort of port connected to the USB port replicator.

  See you soon

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Advanced Port Replicator III more compatible with the Portege R200

  I just ordered a new Portege R200 and above-port replicator... However, I note that the R200 is not listed in the list of laptops supported for this Replicator! Can anyone confirm if I have made a mistake and need to change the order?

  Will be

  I visited the area Options & accessories on the European site of Toshiba, and like you said the Portégé R200 is not listed in the list of mobile phones compatible.
  So I assume that the Advanced Port Replicator III more (PA3474E-1PRP) does not support the protected R series.

• Satellite R15-829: keyboard & mouse will not work on advanced port replicator 3

  Hello

  I have the following problem:
  I have a portable Satellite R15 829 Tablet. I went and bought a Toshiba Advanced port replicator (PA3474U-1PRP) 3 second hand. When I plug in a keyboard and a mouse for it, they won't work. However, when I have the laptop dock and power, of the function on the external keyboard blink.

  I had a load of a keyboard and a USB mouse, and they work, so it would be a kind of compatiability issue?

  So I know that there are be able to enter them. Could be a driver problem type? Or something else? If anyone has any suggestions, I would be very grateful.

  Thank you.

  Post edited by: mur_cott

  Hello

  This device is not known to me but please check if Toshiba Mobile Extensions 3 installed on your laptop. See also the version
  Check if the latest version of the BIOS is also installed on your laptop.
  If this isn't the case, then try updating the BIOS.

• Can I use 2 monitors + laptop screen? Latitude E5530 (HD 4000) with E-Port over Docking Station

  Hi Dell Community.

  I for work recently bought a Dell Latitude E5530 with Intel HD Graphics 4000 and an E-Port Plus docking station. Running Windows 7. Currently I have 2 dell monitors that are used with it, but I want to know if it is possible to use my laptop as well screen (3 screens)

  When I try to do it the way regular thanks to display settings it wont let me choose only 2 of the 3.

  I'm wasting my time trying to figure this, or is there a way to do?

  Thanks in advance for any comments

  Ryan

  Unless you install an external video solution non - Intel GPU can lead only two screens at a time.

• Need Advanced Port Replicator III drivers for use with my Portege M300

  Hello

  I have a Portege M300 with an Advanced Port Replicator III. I had to reinstall the operating system and now can not find the drivers for the port replicator.

  Can someone help me? I am running Win XP

  Thank you

  Hello

  I guess that you need drivers for the XP operating system. Am I wrong?
  You will find on the page of the Toshiba driver all drivers needed and utilities for Portege M300.
  You will also find the installation instructions document. This document shows the proper installation order.

  You simply download all the drivers and follow the order of installation. All that s

• Advanced port replicator II PA3082E DVI out

  Hello

  Portege M100, XP Pro, II advanced port replicator.
  I can get VGA out but not DVI signal.
  How can I switch to DVI output instead of analog VGA connector?
  I've looked everywhere, this option and even sought a separate driver, but always now light DVI.

  TIA,
  John

  Hi John

  I also have information that some units don't supports this interface. To be sure if this info is just make a call to the Toshiba service partner in your country. They have this kind of information.

  Good bye

• Tecra M3: Failed to connect to the double monitors w / Advanced Port Replicator III

  I use a Tecra M3 I put it in place for an III Advanced Port Replicator and I can't dual display to work properly. I have a monitor connected to the DVI port and then another connected to the VGA port. It seems that the laptop is the 1 view and can get only one monitor to work. How can I get the two external monitors to work?

  Thank you
  MBorchardt

  Hello

  In my opinion, you can use a single external screen because you can choose between analog display, the TV and digital flat screen. As far as I know, you can use the FN + F5 keys to change between display devices and can only be set to an external TV or CRT and LCD monitor internal. But not to external displays.
  In addition, I propose to refer to External monitor in the manual which is preinstalled on this device.

  Good bye

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• III - issue of serial port Advanced Port Replicator.

  Hi, I have a few apps that do not work with usb to serial adapters. I need to know if the serial port on an advanced port replicator will not work unless the serial port was "integrated" to the computer, as they used to be in older laptops.

  Are the drivers required to make ports to work within windows?

  I have a Tecra M2.

  According to the specification for Tecra M2 Toshiba PA3314E - 1PRP Port Replicator III Advanced is certainly compatible and I guess it should work. Unfortunately, my printer has USB port and I can't test it.