Portege M750 WIFI disconnects all about 30 minutes on its own

Similar Questions

• Screen ACL in Windows 7 towers / turns off in 1 or 2 minutes on its own

  Strange problem started recently. My computer laptop LCD screen turns off in 1 or 2 minutes on its own even to power cable. I checked and have already reset all power plans, but the screen seems to stop on its own. I was not able to understand the problem.

  Also changes to the power management has no effect on this behavior. For example if I increase the delay before the screen stops at 10 minutes (with or without battery) it always closes the screen in 1 or 2 minutes

  Can you please suggest what could be the problem.

  I have an Intel Core 2 duo processor - x 64-HP DV4t laptop

  Thank you

  Varun

  Varun

  Hi Varun,

  ·        This happens to you while you use a particular program or are the random problem?

  I think it is a hardware problem and you may need to contact the manufacturer of the laptop computer for further assistance.

  In addition, uninstall any software of management of power given by the manufacturer and check.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MapleStory disconnects after about 2 minutes in Windows 8, no problems with Windows 7

  I just got a new laptop with Windows 8 on it. The specs are well above what is needed for the game, which shouldn't be a problem. I am able to boot and log in the game, but after about two minutes, it disconnects, gives me an error message saying: "unable to connect to the game server. Please try again later. "The window closes so saying me that I was disconnected. The game works perfectly fine on my old laptop, which is running Windows 7 and has worse characteristics.

  I tried to run in compatibility mode, but get a different error after blackcipher loads, but before loading the game, saying: "the instruction at 0 x 00649243 referenced memory at 0 x 05055215. The memory could not be written. Click on OK to terminate the program. »
  I've looked everywhere and can't seem to find solutions.
  If it helps, my computer is a dv7 HP Envy with an Intel i5, 8 GB of RAM and a 2 GB nvidia geforce GT graphics card.
  If anyone knows a solution to make it work, it would be most appreciated. It seems that a few other people have the same problems, but others with Windows 8 have no problem, so I hope that maybe it's just a setting I need to change.

  Hi Sannesteenhuis,

  Welcome to the Microsoft community.

  Please answer these questions to better understand the issue.

  1. Have you tried the steps by Pinaki displayed? If Yes, then what is the result?
  2. Have you tried measures to solve this problem?

  I suggest refer you to the following procedure to copy the Event Viewer logs.

  To view the events in the Event Viewer Application log:
  1. press the key Windows + X key and then click on Control Panel.
  2. double-click Administrative Tools, and then double-click Event Viewer.

  NOTE: Alternatively, you can start Event Viewer by starting the Microsoft Management Console (MMC) program that contains the snap observer of events.
  3. Click to expand Event Viewer (if it is not already expanded).
  4. click on Application.

  The events that are logged in the application log are displayed in the right pane.
  5. to view more details about a specific event, double-click the event that you want to display.
  6. to copy the details of the event, click the copy button, open a new document using the program in which you want to paste the event (for example, Microsoft Word) and then click on paste on the Edit menu.

  Also suggest you try to install the game in compatibility mode and check if it helps.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope that the information provided was useful. If you need other assistance do not hesitate to post. We will be happy to help.

• WiFi disconnects every 1-2 minutes

  Once I have signed to the internet and open a page, IE email, news, etc., my wireless connection is lost and goes back on saying wireless connection is now connected, what is happening every 1-2 minutes

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. the problem occurs in safe mode with networking?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• How can I delete my iphone to my wife 5s iCloud account and give it its own apple ID

  How can I delete my iPhone to my wife 5s iCloud account and put his account. I am worried about ruin.

  Go to settings-> Icloud, scroll down and you will see account delete, it will ask you to enter the password and removed icloud, to open a new apple id or icloud account, simply go to icloud.com, or you can do with itunes if you now how to use. All the best from Kosovo.

• my mouse works correctly, it moves all over the screen on its own

  It started this morning very well, then unexpectedly, he starts slowly his way around the screen that I have never had this before, I use a trackball mouse, I already tried rebooting but also tried another mouse and even tried just unpluging the mouse and pluging it back

  Have you tried to use canned Air to clean the mouse?

  Using the uninstall/reinstall driver?

  Is the mouse still under warranty?  Contact manufacturer for a replacement

  There are nearby facilities that could conflict with the mouse?  Router, cell phone, phone?

  Yet away from the system.

  Here are links to support Logitech on the same issue

  See the latest response/resolution on the first thread.

  http://forums.Logitech.com/T5/keyboards-and-keyboard-mice/erratic-mouse-behavior/m-p/325613 
  http://forums.Logitech.com/T5/mice-and-pointing-devices/erratic-MX-performance-mouse-issues/m-p/711968

  http://forums.Logitech.com/T5/mice-and-pointing-devices/anywhere-MX-cursor-moving-on-it-s-own/m-p/663284

  http://forums.Logitech.com/T5/mice-and-pointing-devices/bought-a-Logitech-MX620-wireless-laser-mouse-erratic-mouse/m-p/344362

• Portege Z series - the mouse cursor moves its own

  When I start my series Portege Z the cursor of the mouse moves by its own. Alfer several minutes (less than an hour) it stops and it works properly.
  For your information on the laptop, the Antivirus is installed and updated: AVIRA and Spybot

  What I tried to solve the problem:
  (1) I downloaded and installed the latest version of the pointer ALPS driver device that even so the same version was already installed. No result, same behavior
  (2) I tried with an external USB mouse, disable touchpad/pointing stick. No result, same behavior

  Suggestions, please?
  Thanks in advance

  Maybe you can try to start with a Live CD/USB. If this problem occurs also with the OS Live the question is related to laptop. If not, it s a Windows problem and perhaps a recovery would solve the problem.

• My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why.  The deskjet printer shows that there is a wireless connection.

  Hi Mpsfeldt,

  Thank you for using communities Support from Apple!

  Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.

  To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.

  On AirPrint - Apple Support

  Best!

• HP Officejet 5610 all-in-printer decided to take about 5 minutes to print or copy a document to a page.

  I have a HP Officejet 5610 all-in-one-3 years.  My printer decided to take about 5 minutes to print or copy a document to a page.  Can anyone help?

  Original title: impression of the printer

  Hi Phyllis,

  I suggest you follow the steps in the link given below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Brief us with the State of the question. We will help you to come.

• My windows chassis disappers after about a minute by all adobe products.

  I have CS3 and adobe XI player and my disappers of chassis of windows after about a minute. In my opion this problem starts by upgrading to adobe reader XI. Even if deinstalltion drive and all the problem adobe products persists. So please can someone help me?

  I wonder if you have Kapersky Antivirus?

• After a brief interruption of service, Firefox will load all pages I have tried to load during shutdown for about a minute

  After a break in service web, Firefox refuses to load the pages I have tried to load during shutdown for about a minute, even after other pages load fine, he is not even trying to establish a connection

  Connection errors

  https://support.Mozilla.com/en-us/KB/error%20loading%20Web%20sites#w_connection-errors

  Check and tell if its working.

• USB disconnect its all a few minutes after installing a PCI USB/Firewire card

  I recently installed a USB (offering 2 additional USB ports and 2 firewire ports) PCI card. Since installing I get sounds disconnect USB every few minutes, even if no device is disconnected (or connected). There is a USB device that is connected to the new map (a map of Behringer guitar). The other 3 ports are not used.

  What is the origin of the sounds of disconnect USB and how can I make sure they? I am running Windows 7 64 - bit on a motherboard for Asus P8Z68-Vlx.

  Hello

  We would like to begin with an apology for not responding to your concerns on a timely manner.

  Thanks for the sharing of detailed information on the issue. Given that the problem occurs even after the withdrawal of the device to the computer USB. This problem may occur due to the failure of USB port, I suggest you contact the manufacturer of the computer for better assistance.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• FlashGot suddenly causes FF hang after closing. Takes about a minute to stop the execution. Why?

  During 2 days, I noticed that FF does not close the output. The process continues to run for about a minute, using up to 100% of my resources. After the suite Mozilla troubleshooting guide, I found the culprit to be Flashgot. I can run ALL my extensions and plug-ins and don't have this problem. But at the point where I have activate Flashgot, this problem occurs. What is strange is that I've been running FF and Flashgot for a year with no problems. Even after updating both versions the latest, everything was fine. It was only a problem in the last 2 days. In addition, exactly the same thing is happening on my wife's Office, as well. Once again, that in the last 2 days. I tried uninstall/reinstall the two FF and Flashgot, but to no avail. What is going on?

  Create a new profile and delete the old one seemed to solve the problem. Why the problem occurred in the first place is beyond me. But after creating the new profile, restore all my favorites and reinstall Flashgot, everything seems to be a behavior wonderfully. For anyone else having similar problems, I recommend that you create the new profile. It is easy to do, as long as you save your old, then you can copy all of the files required to restore your preferences and bookmarks.

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• Portege M750 and 3 G/GPS

  I have a Portege M750, inserted a Sim Card into the slot behind the battery, but I can't connect. It detects my local network (Vodafone), I have a level 3 signal but when I click on "Connect" it tries to connect and fails. The weird part is that whenever I try to connect a LAN connection icon (like trying to acquire the network address) and then a bit of balloon pop up the message "connection to the network of Local 4, a network cable is disconnected. Then give me some ideas on what to do.
  And I would ask if it is possible to connect to the GPS. I have a navigation program (IGo 8 for pc) and I want to connect the GPS.
  Here is a list with my system features:

  Date 06/09/2009-16:06:29

  [Information on PC]
  Model name PORTEGE M750
  Part number PPM75E-00S00JG3
  Serial number Y8096960H
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  Version of the BIOS Version 1.80
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 250,064,962,560 [bytes] 232.891 [GB]
  Capacity of the hard drive space free 178,133,031,424 [bytes] 165.899 [GB]
  Version Mobile Intel (r) 4 Series Express Chipset Family video = 6.14.10.4953
  Screen resolution 1280 x 800 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5804
  Network Intel(r) 82567LM Gigabit Network Connection = 9.52.25.0 version = 00:1 MAC address: 7E:25:7 A: B5
  Version of Intel(r) WiFi Link 5100 AGN 12.4.3.9 = MAC = 00:21:6 B address: B6:C4:3E
  F3507g Mobile Broadband Modem Modem Toshiba version = 4.50.2.0
  IDE Device 1 Hitachi HTS543225L9SA00
  2 IDE devices MAST * a DVD-RAM UJ862AS
  Interface IDE 3 no
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no
  Internet Explorer 8.0.6001.18702

  EC/KBC Version "V1.10.
  PS-MICOM Version "V1.00.

  Hello

  Don't know what's going wrong for you, but you can try the latest drivers/Toshiba Wireless Manager.

  Drivers:
  http://Support1.toshiba-tro.de/Tedd-files2/0/3gdrv-20090130131934.zip
  Wireless Manager:
  http://Support1.toshiba-tro.de/Tedd-files2/0/wlmng-20090331151350.zip

  I'm not familiar with IGo 8, but if she supports the NMEA data to the serial port, it should work.