Portege R200 - Docking Station

Similar Questions

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Portege M200 - weird display with docking station problem

  Hello

  I use a Portege M200 with MS Windows Vista and the Toshiba docking station. Whenever I connected the system closed down it will start with low light and different screen resolution. The brightness can then be adjusted in Vista.

  To solve the problem, I have to disconnect it, then put it in PC Mode and finally stop Vista. With the next offline boot, it works correctly and can be re-docked. Maybe it's just a lack of understanding of the system? It seems that with a rooted boot, nVidia somehow takes place or is there different profiles?

  Thank you!

  Alexander

  Hello

  At first, I must say that Portege M200 is old enough laptop model and I really wonder that Toshiba supports this model of laptop for Windows Vista. You are really lucky in this regard.

  In any case very important is info which edition of WXP Tablet Toshiba offered tools for/disconnect. If I remember well, it was utilitarian Toshiba Mobile Extension. Using this tool you has been able to use different settings for Bay service as well as for output screen to choose the correct resolution.

  Under Vista it is controlled by Vista and, AFAIK, Toshiba does not have any special utility for this. You must also understand that procedure/disconnect (power switching power supply) is controlled by Vista and I can imagine that under Vista it does not work perfectly.

  My opinion is that there is not much to do, but I hope I'm wrong on this issue. Let's see what else users of forum about this.

• Port Replicator/Docking Station for Portege M700

  I'm trying to find a docking station or port replicator port for my portege M700 tablet with no luck so far.

  Ideally, I want something that costs at least 4 ports USB, VGA, audio and LAN.

  Any suggestions please?

  Hello

  You can use the Express Port Replicator Docking Station PA3508E-1PRP part number.
  It should be compatible with your Portege M700

  You know the Dynadock? This pretty s toy and provides different ports.
  For example the Dynadock DVI (PA3542E-2PR) supports video output from DVI port and Dynadock VGA (PA3541E-1PRP) supports the VGA instead of DVI port.

  You can use all these 3 devices with M700

  Check it out

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Docking station for Satellite Z30 - A - 1-2

  Hello

  I'm looking for a docking station for my laptop, Satellite Z30 - has - 1 2.
  Can you please help me find the right model?

  Thank you!

  Hello

  I found some info that you can use Hi-Speed Port Replicator III. The price is about 220 Euros.
  In any case, before order you you can check compatibility with your local dealer.

  One last thing: on the compatibility of the list your will find Portege Z30.-a. This model of Toshiba is in fact identical to your Satellite model.

• Docking station for a Satellite U500

  Hye,

  I broke my laptop power supply. I can't change it to another because it will always be the same.
  I'm looking for a docking station, but I'm not able to find one that is compatible with my laptop.
  Is it possible that no one does exist for this reference? Or I do not know how to find?

  My laptop is a * SATELLITE U500-119 *.

  Thanks for your reply if you have ever had to find a such accessory.
  You have found another way to submit this question?

  Thank you very much!

  Gaelle

  > Is it possible that no one does exist for this reference?
  If your computer laptop doesn t have docking connector on the underside, it is not designed to work with docking station. As far as I know that u500 has not so Toshiba does not offer any station to home for him.

  In General, a docking station is available for laptop Tecra and Portege.

• Satellite Pro U200 - Docking Station

  You can buy a docking station for the Satellite Pro U200?

  In the affirmative, please can you pass on a link? or the numbers of models etc.

  Thanks in advance for your help.

  Adam

  Hi Adam

  I answered your first question on the Portege docking station.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17291

  You will find the link to the site Options and accessories.
  This Toshiba site, you will be able to find the compatible devices and supported.

  If your computer supports a slot down for a connection to the Port Replicator port so you can use the docking station or port replicator port as an additional device.

• Protect S100: Advanced Port Replicator/Docking Station

  I need to know what docking station to use it please.
  Advanced Port Replicator III Docking Station
  This one will work?

  Hello Andrew

  I found some nice info on the unit that is compatible with your S100 Portege.
  Visit this link:

  http://www.CostCentral.com/prodDetail/Toshiba_Advanced_Port_Replicator_III/PA3314U1PRP/C90140/

  Hope so, I could help

  Good bye

• Tecra 9100: Installation of the printer with docking station connected

  I have a Tecra 9100 with a docking station that run under WIN - XP SP1. Trying to install my printer, an Epson 740 with USB connection, I found that I need to create 2 entries for the same printer, 1 environmental off-STATION and 1 for MOORING environment, known as the XXX (1 copy). Is this normal or have I done something wrong.

  This is different from my old Portege that keeps the 2 hardware profiles, 1 connected uindocked and 1, and there is only 1 entry in the Printers folder.

  Also, if I unplugged the printer from the docking station and later taking again on another USB port,
  He will ask reinstall me the printer again.

  Thanks for any comments from anyone.

  I have Tecra M1 and use it on the same port replicator as you have your 9100. The same happen to me if I want to use the webcam on different USB ports. Use it on the same there is no message but using the second port he asks the driver.

  It seems to be normal. :)

• Docking station for Satellite L450

  I bought a new laptop satellite L450D - 11 X.

  Does anyone know if there are for these docking stations. So far I have found none.

  your your

  Hello

  How do you anchor the Satellite L450 with a docking station?
  Your Satellite L450 supports a host slot at the start of the unit?
  I don t think so!

  Only a few Portege and Tecra series were equipped with this slot which allows to anchor the device with a docking station

  You can use a Dynadock. This Dynadock can be connected to a USB port
  Google just for Toshiba Dynadock.

• MacBook Air for Docking Station connection problem

  I am trying to connect a MacBook Air to another monitor via a Kensington docking station, but they do not communicate. The additional monitor is sent immediately to sleep. If I connect Air to the monitor directly everything works fine, but I want to simplify my life with the docking station. Anyone have any ideas?

  Well, I understood the question. It seems that the original DisplayLink software I was using was not correct. After connecting with Kensington, they gave me info on a new beta driver and it works fine.

• An adapter that enables the new ipod touch be played on an old docking station for what they do?  I'm not tech savvy... any help is appreciated!

  Is there an adapter that will allow you to listen to music using the new ipod touch on a docking station that have the card that fits the older ipods?  I'm not warned, any help would be greatly appreciated.

  See http://www.apple.com/shop/product/MD823AM/A/lightning-to-30-pin-adapter.

• Docking station and of the menu bar does not appear automatically

  Hello

  I have some problems with the bar menu and Dock not appearing not to when the cursor is hoisted at the top and the setting up of the docking station...

  It appears in the Security Mode.

  In addition, the windows in Mission Control shows either, when you place the cursor at the top.

  I tried to kill the Dock. Finder and Menu bar in the Terminal with the command 'killall '.

  speculate as to what is wrong?

  -Kasper

  You can stop the process force using the background activity monitor utility. Just find the process Dock (sort the list of processes by name), or use the search box at top right, select, and then click the button exit (the icon is an 'X' in an octagon) in the upper left corner of the window of the activity monitor. It will ask if you want to make a normal Quit or force him to leave.

• The docking station uses Henge drivers?

  Is the Henge dock just a cable Organizer? -Seems all that is material.

  Or I need specific SOFTWARE drivers so that my Henge Dock to exploit 100% as expected?

  I use the Version B Henge Dock for my MacBook Pro 17-inch - and it all works when it is plugged.

  I just want to know if I'm missing out on something?

  THX

  Henge Docks are just a docking station, no software required, and any other features. Make sure to work your hard MBP while closed but, I think that life has been shortened on my Macbook, because it has been used mainly in the dock and couldn't cool properly with the lid closed all the time. The logic board failure.