Portege R400 - Fingerprint Software and Firefox 3

Similar Questions

• Portege R500: Fingerprint Software and VIsta SP1 problems

  I encounter another problem which seems to be related to the fingerprint software. If I install the software, no issue arises. Once I register the fingerprints, the system slows down. Same clang of the other computers in the domain, in that I am, the response slows down gradually and then fails several times, before becoming inaccessible.

  Then as Exlopre crashes after a while. If I can stop the command, it hangs at the screen bright blue vista saying "logout". Then, the only way to turn off the computer is by holding down the power button.

  I log back in again once, unregister the fingerprint and all works well.
  Any idea? Thank you

  P.S. The software and drivers Vista SP1 and Toshiba are fully patched/updated

  Hello

  I am interested in your question, you are connected to a domain and use the fingerprint software in the network?

  Well, how it works in the Working Group?
  Have you noticed the same slowdowns system using laptop computer not connected to the network?

  Please check this because I guess that there is local connection between domain parameters (server) and your stored settings on the R500.

• Portege R500 - fingerprint reader and SD card reader does not work

  Hello

  I hope someone can help me.

  I bought an opportunity Portege R500 (the warranty is still available until 12/2010) and set up with Windows 7 Home Premium.

  I installed all the drivers for Windows 7 from the specific model support page. Driver Vista have been installed for all drivers, which are not available in Windows 7.

  If everything works fine, except the fingerprint reader and the sd card slot.

  Fingerprints: I tried al a lot of drivers, even that of the R600 and R700 (such as proposed by someone here in the forum). When I run the Toshiba fingerprint utility, a text box tells me, that there is no connection with the sensor. Authentc software does not work either.

  SD card reader: I tried several SD cards from a card SD 2 GB simple and old (but functional) Kingston. According to the Director of devicce, the driver is correctly installed and running.
  The blue icon next to wireless light turns on and after a "long", a message box appears and asks me to format the card. It takes a little longer and then I get the massage, the card cannot be formatted. I tried the same procedure with a SDHC card 4 GB and a Micro SDHC card in a SD card adapter. Then of course the cards are identified but not usable and formatted.

  There are several reports of other users of the internet, the locations of sd card in computer models laptops different toshiba have problems under Windows 7.

  The two problems have emerged as well under Vista. My hope was, this upgrade to Win 7 solve poverty. Unfortunately remain the problems of th I have Win 7.

  Thanks in advance,

  Michael (Germany)

  Thanks for the feedback second
  By the way; It is a forum for user to user in this community, everyone is trying to help everyone, so if someone wants to say that he would be able to help, then you will get a response from such user maybe you should also pass a few simple threads in this forum and might help other users as well?

  Tip; BIOS update and setting BIOS by default (with F9) can solve many problems... it's worth a try...

  By the way; Win 7 is able to update the drivers automatically. I recommend that you run an update in Device Manager and let windows search for the update.

  I ve got another laptop and installed Win 7 as well. The card reader Vista driver has worked for me on Win 7 OS just a tip

• Portege Z30: Fingerprint software no longer work after Win 7 32-bit downgrade

  Hi, I need a little more help with my Z30.

  Have just downgraded to Win 7 Pro 64 Bit to Win Pro 32 Bit.

  Everything seems to work except for the utility of fingerprinting.

  My laptop has biometric device of validity and it shows up as working in the Device Manager.

  I have install then it appropriate Toshiba Fingerprint Software listed as fp - sw - 20140811102806.zip.
  The installation seems to go smoothly.

  However, if I run the software I get an icon on the taskbar, but nothing else. By clicking on this icon (or going back to the program via the start menu) and no registration window opens. Basically, nothing happens.

  If I try and close the window in the bar of tasks, nothing happens. I have to use ctrl-alt-delete to close the icon and stop the running program.

  I ve started to change the settings and made sure that the biometric device is enabled and checked the box to allow users to log on to Windows using their fingerprints.

  I ve uninstalled Validity Sensor and allowed to reinstall.

  I uninstalled and reinstalled Toshiba Fingerprint Software. No luck.

  I think that I m doing something pretty obvious, but need some help on this.

  Anyone got any suggestions?

  Maybe you need to reinstall the software in the correct order.
  Try this order of installation:

  SP3 in Windows 7
  Infineon TPM professional package
  Chipset SW installation utility
  Intel Management Engine Interface
  Intel AMT software
  Intel driver
  NVIDIA display driver
  Intel Rapid Storage Technology driver
  Technology of quick start Software Intel
  Realtek Audio Driver
  Intel LAN driver
  Intel USB3.0 driver
  Realtek card reader
  Intel Wireless LAN driver
  Driver Bluetooth filter Intel
  Intel Proset
  Bluetooth Stack for Windows by Toshiba
  ALPS Pointing Device Driver
  TOSHIBA fingerprint utility
  O2Micro smart card reader driver
  Smart Connection Intel (r) technology
  TOSHIBA value added package 1
  Intel Wireless Display
  Intel NFC Software Kit
  His Studio in DTS
  Registry Patch files

• Portege R500 - Fingerprint Software has suddenly stopped working: driver error

  Hi you all,.

  yesterday it worked perfectly, now the driver of fingerprints could not be initialized (charged ok, error system at boot).
  Now the fingerprint software is useless, since the device no longer works).

  Uninstalled and reinstalled does not.

  Clues?

  Hello

  He s strange a driver doesn't work all of a sudden.
  However, perhaps there are system files or corrupt driver who knows...?  :|
  If the software and reinstalling driver don t help, try to roll back the OS to the point of time at the beginning.

  In the worst case, you will need to use the Toshiba Recovery CD to restore the machine to factory settings, but I hope that the Vista System Restore tool.

  Good luck and best regards my friend

• Lenovo Thinkpad t500 - Thinkvantage Fingerprint Software and driver for the fingerprint sensor problem

  Dear Sirs,

  I have a Lenovo Thinkpad T500 with Windows XP Pro SP3 FR, I reinstall. in this notebook, I also have Sophos Safeguard Enterprise 5.50.1 installed that is compatible with Thinkvantage Fingerprint Software 5.8.5.6014. The problem is that I can't find driver for the fingerprints (authentic Tec Inc. AES2810) sensor.

  Can someone help me looking for a driver for this device, or where I can download it?

  Thanks in advance and best regards,

  F. Paulo Pinto

  I assume you are using XP 32 bit?
  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70598

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Portege R400 - how to get the fingerprint device to HDD unlock

  Portege R400 model PPR40E-00901LEN

  I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

  The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

  Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

  My questions are

  (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

  (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

  (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

  Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

  Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

  Thanks to hope
  River ~ ~

  Post edited by: river14april

  Post edited by: river14april: typos and clarity

  null

  Hello

  All I know is that the fingerprint for Win 7 software is created by UPEK company.
  http://www.UPEK.com/support/customersupport/psql.asp

• Satellite U200-122: Fingerprint Software does not work properly with Firefox

  When I first installed Firefox on my U200-122, everything worked fine. Connection to different sites by fingerprint has been problem free.

  After an update of firefox, the problems started. Rather than fill my username and pw, fingerprints of popups software and asks if I want to register for the site (which I did well before).

  Established since Fingerprint FF 2.0.0.6 ist is correctly installed. If I remove this configuration FF, get out, restart the installation, and come back in FF, it everything works fine... until the next reboot. I tried to install the latest version of the software of fingerprint - did not help.

  Any ideas?

  Thank you.
  Markus

  Hello

  According to your description of the update for firefox made mistakes
  Maybe the registry keys are corrupt
  I recommend you to remove the software of fingerprint.
  Then, restart the laptop and also erase the registry with freeware called CCleaner.
  Then run all updates of Firefox.
  After firefox update to restart the laptop and reinstall the fingerprint software.

  Good luck

• Fingerprint Software does not work with Firefox after an update

  Hello

  the first thread that I started this topic is closed, so I have to make a new...

  As mentioned here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25776&TSTART=15

  Fingerprint Software no longer works with Firefox after updating the browser. Only by making the circumvention of the above thread it can be fixed. After the next update should be that any new... uninstall, reinstall... means a lot of time.

  Are there no real solution for this? For Firefox users, the fingerprint software is useless unless they all do the- and relocation on each update.

  There is no solution as the update of the utility of fingerprints or something like that!
  The solution is to remove and to reinstall Firefox to get it working with the utility of fingerprints!

  The update of Firefox damages registration of fingerprints in FF and therefore the new resettlement is necessary!
  If you want to know how this will be corrected in the FireFox browser, please contact support to Mozilla or the developer!

• Lightning suddenly does not at all despite all software including firefox being updated and reinstalled. He now works in Chrome and IE but not firefox

  I was trying to get flash to run more easily in zynga.com. I have disable hw accel in flash and firefox. When that didn't help, I tried to re - install. Flash has stopped working completely. I uninstalled and reinstalled chrome, ie, flash and firefox. I got flash to work in IE and Chrome now, but all I get in FIrefox is a white screen and I can not even right-click to access the control panel of the flash. Can someone please help me understand what theheck happened?
  I have a windows 7 Home premium system with 16 gig of ram, 2 terrabyte drive and 1 gig nvidia card (which now has the latest drivers).

  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  Work not Flash not at all or only on some web pages?

  • http://www.Adobe.com/software/Flash/about/

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Portege R830, Win7 64 - Fingerprint Software update fails at startup

  After the Fingerprint software version 2.0.06409 update as recommended by Toshiba TEMPRO, a system message appears to stop and start: "TFPU LogonUI.exe Entry Point not found. The entry point of procedure... not found in the TFPUCommand.dll dynamic link library.

  The system cannot use connection of fingerprints. After logging in using the name and password of a standard user, the software itself runs correctly, by contacting the fingerprint sensor.

  Worked fine just before update.

  Hello

  Have you tried to reinstall this software of fingerprint?

  Firstly uninstall the fingerprint tool preinstalled.
  Clean the registry (for example, by using a 3rd party software CCleaner) and restart the laptop.
  Download the utility of fingerprinting of driver Toshiba UE page and install the software.
  Reboot the laptop once more and test functionality.

• The latest version of Firefox is not compatible with my McAfee software and now I have no virus protection. How can I go back to a previous version of Firefox?

  When the latest version of Firefox has been installed it gave me a message that the McAfee software was not compatible and so I have more protection against viruses. She added that when it became compatible I would be informed. I cannot afford to be without my virus protection and want to revert to an earlier version of Firefox.

  I hope that the problem is that Firefox 5 is not compatible with some of the additional modules of McAfee. It will be rather worrying if she has a problem with McAfee security programs themselves. Please specify exactly what software and the version that you have problems with.

  There are problems with McAfee Site Advisor /questions/839953 #answer - 205178 known but we hope McAfee that will resolve in a few weeks.

• Problem with the TrueSuite Fingerprint on Portege R500-121 software

  121 - R500 new with Vista Business. After two weeks of evil, I realized that the failures of synchronization of offline files resulted from the fingerprint software. The only solution is to uninstall Truesuite, therefore not fingerprint authentication if you want threads in offline mode. How Toshiba can ship a laptop with software that one of the most important operating system for peat mobile users have?

  Already checked the Drivers Toshiba download site if a new version is available? Maybe there is a new version that fixes this bug.

  If not, I would check the microsoft Web site, if there is no case known, so maybe someone has a out some correction or similar.
  I wouldn pointing with your finger to toshiba, first of all, because it's definitely a software error and there are probably more manufacturers of portable with the same fingerprint sensor that may have the same problem.

  Welcome them

• Portege R500 - I lose settings in the fingerprint software

  Hello

  I use the fingerprint software, but sometimes, I lost my settings and database password and user fingers are clear. I have to import a few tweaks and then works fine. I lost my settings for 2 or 3 times in the week!

  You have an idea? Thank you

  Have you tried updating the software of fingerprint?
  To my knowledge, there is a newer version available
  See European driver of Toshiba and download and update software.

  One question; Do you use cleaning software? I mean software that remove the temporally files, form entries
  This software could clean up and delete entries from your