Portege R500 2 questions: restart mode & sleep

Similar Questions

• Equium L40 shows wrong screen resolution after the mode 'sleep'

  Hello

  My Equium L40 in restart mode 'sleep' is always a screen resolution greater than when he went to sleep!
  Someone knows what's going on?

  You have an external monitor attached?

  Have you updated display drivers and BIOS?

  It XP or Vista?

• Problem reading SD card after the mode reader 'sleep' Portege R500 SP1

  Hi all

  I still have the problem, that my new Portege R500 with Vista SP1 does nor react when reading / writing on a SD card. This only happens when the SD card is inserted and I wake the R500 from his sleep. All read or written in the SD card will lock the PC and the R500 must be turned off hard. I tried this with different SD cards with always the same result. The R500 was freshly installed from the recovery DVD and even installing from a DVD SP1 Microsoft at any time has the same exact behavior. All the drivers are up to date, Bios 1.60. I also tried to remove the entry in Device Manager and reinstalled.

  I found on the Microsoft site a patch, that describes exactly this issue: [http://support.microsoft.com/kb/936825 | http://support.microsoft.com/kb/936825]. But this patch cannot be installed under Vista SP1. Microsoft says that it is already included in the Vista SP1. But it still does not.

  Any other idea? Or what I have to live with it?

  Best regards
  Stefan

  Hello Stefan

  I can imagine that this problem is quite annoying for you, but otherwise, you can disconnect SD card when you have no more need. I can't imagine that it must be inserted at all times.

  I can imagine there are a few conflicts between the patches from Microsoft and Toshiba driver but such bugs should be fixed by some Toshiba updates or hotfixes Microsoft. What to say? I'm afraid at the moment that you must live with it.

  By the way: post please exactly the model of mobile number and give some info on the SDCard (capacity). Perhaps someone with the same model laptop and the same card can test and view the results.

• Portege R500 suddenly turns off, restarts

  Scared near death of my 16 month old Portege R500 running XP Pro.

  Symptom: It suddenly shuts down while I work - the screen turns white (black - although a fraction of a second of vertical - I think - lines), then it starts again. When it restarts automatically, I get a notice from windows saying that my system has recovered from a serious error. What happened three times in the last month. I can't be sure of that, but I think that in all cases, I was working in IE - version 6 and now upgraded to 8 (which keeps freezing upward in his own right, but seems not related). It seems to happen completely randomly and not at any relevant time as starting a program or something.

  QUestion: any experience? Anyone know what is happening? My hard drive is going to die, or is it just an overheating?

  Note relevant potential: 36 to 40 degrees celcius here for the last 8 weeks. The computer is so hot that you can fry an egg on it. It is on a raised platform and let him NAP for an hour or two after lunch. Two of us sit with a fan on us. We use an external display.

  Thank you in advance.

  > It suddenly shuts down while I work - the screen turns white (black - although a split second of worm)
  > Note relevant potential: 36 to 40 degrees celcius here for the last 8 weeks.

  Well, the high temperature might be the cause of this behavior.
  And of course, that could happen often in the summer while a higher outside temperature.

  I think you should check the cooling fans.
  Spray compressed air to remove dirt and dust from the fans.
  Ensure that there is enough free space around the laptop to get properly air circulation.

• An050nr HP Star Wars: HP 15-an050nr restarts when the stop if she was in mode 'sleep'

  Hello
  
  Since the last 2-3 days I am facing a problem with my laptop that it restarts when I try to stop, but with what I've noticed, is that it does so only when he was previously been put in mode 'sleep' and once the restart occurs, and then when I stopped it it normally does. In addition, I also noticed that sometimes, Windows recognizes that the laptop was unplugged and need to change the parameters of the battery power supply and this is true for when I plug as well, it just does not respond to be plugged and unplugged. Any help is appreciated.
  
  Kind regards

  Hi@Roshaan-Shakeel,

  Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Problems with the battery and PC stop. Is this fair?

  I would definitely help.

  Try to uninstall the controllers of battery from Device Manager and check if that supports the load indication problem.

  • Windows with your left hand and hold and then press the key for the letter X with your right hand.
  • Then select Design Manager in the list.
  • Right-click on compatible ACPI Microsoft control method battery and choose uninstall.
  • Close Device Manager, restart the PC.

  Hope this helps

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• Sierra restart in mode 'sleep'

  I have a beginning 2014 13 "MacBook pro retina. Since the Sierra upgrade my laptop restarts whenever I put it in mode 'sleep'. He did this in the past, maybe once or twice every two months, but now, since the upgrade, it's every time.

  Someone at - it ideas? I did the usual, clear cache delete unnecessary files, checked all my settings preference system, even done a clean install... and the problem is still happening.

  What happens if you start in Safe Mode? Exactly, what did you mean by, "a pure installed? Erase you the drive, and then install OS X? Have you tested before installing anything else then? You disconnect all third-party devices except the Apple keyboard and mouse?

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• This error keep the origin of my iMac restart in mode 'sleep'. Someone knows how to fProcess: AdobeUpdateDaemon [82] (suspended) Path: / Library/Application Support/Adobe/Adobe Desktop ElevationManager/Common/AdobeUpdateDaemon Architecture:

  This error keep the origin of my iMac restart in mode 'sleep'. Someone knows how to fix this? TA.

  really, there is no reason to start even regularly your cc desktop app.  you only need to run once every 30 (if you have a monthly subscription) to 91 (if you have an annual report) days.

  in preferences, you can disable the desktop application start automatically when you start your computer.

• Portege R500 USB Extrenal HARD drive question

  Recently, my boss bought a Portege R500 and I installed Win XP SP2.

  Installed all necessary drivers.

  It is, if I connect an external USB HDD's does not detect and I use the laptop after having removed the USB HDD applications hang up and it wont even stop.

  Can someone share a light on this problem?

  Thank you.

  It is not easy to share a lot of light on it. Who is the manufacturer of this external HARD drive? You have a software with this HARD drive that needs to be installed first?

• Several questions on Portege R500

  I got this new Portege R500 (PPR50E) and the fan noise is driving me crazy! I can't believe why the processor should run all the time so warm, even if it isn't on the heavy load. Even online light surf starts the fan of rolling and moaning of it are really annoying. I tried to find a software that puts the CPU halt state, as CPU Idle, but no chance, none of the old applications work with that CPU. The temp is always around 60 ° C which is quite a lot even thought I've customized power management profile to use only the lightest load.
  Someone has ideas how to force the processor to stop the State?

  I am also struggling to get the standard 1280 x 720 60 Hz resolution to work for an external projector, but that's another story... Calculator of DTD disobeys his magic and now I have to start hacking the registry manually...

  Then sound card driver. I would use two audio apps at the same time, but the driver does not allow the sharing of resources, which means that I can't use Amplitube and media player at the same time.

  The CPU is supposed to be dual-core 1.2 GHz with 2 GB of memory, the machine should work pretty well. BUT Vista spoil the fun! This is the second time that I am using Vista on a laptop and now I am quite convinced, is an eater of great resources and no good OS. R500 should come with Win XP SP3!

  I'm sorry because I have to whine, but I will return it to the dealer if there is no solution to these.

  Post edited by: ADMIN

  Hey Buddy

  The machine is known to me. It s a large notebook small and powerful.
  Fact is that the laptop was equipped with a powerful Intel Core 2 Duo CPU processor that produces a lot of heat.
  To my knowledge, the internal temperature (not only the temperature of the CPU) varies and can increase and decrease at the rate of 15 degrees C.
  Fact is also that cooling modules are not oversized due to the size of small notebook and the unique fan must therefore turn more quickly to ensure cooling properly.

  He should also know that the new series of portable comes with the operating system preinstalled Vista and this OS needs a lot of resources.
  It is no secret.

  Of course, you can install you own Win XP on the R500.
  I think the laptop wouldn't create this heat using the XP and the cooling modules should run a little slower.

  Installing XP is possible and all Win XP drivers are located on the European driver Toshiba page!

  Greetings mate

• When I put the computer on the mode 'sleep' it goes into sleep mode and then restarts on its own.

  Have Vista Home Premium. When I put the computer on the mode 'sleep', it closes and moves to the State of low consumption with the screen. But in a few seconds without touching the key or mouse it starts again. What is going on?

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Win 7 Pro 64-bit restarts immediately after entering mode 'sleep'

  When my computer starts in mode 'sleep' it wakes you up in 2 or 3 seconds each time. I put all devices except the keyboard do not allow to wake up. I checked powercfg - lastwake and I get the following for the last wake-up device:

  USB\Root_HUB20\4 & 3021f81 & 0

  I tried to remove my external USB hard drive and he rewakes always after only 2 or 3 seconds. I have nothing else plugged into my USB ports. When I go to Device Manager and look at the tab for ads of hub power management root USB (2) they are not checked for to wake up.

  I use McAfee for my resident protection and he doesn't find anything. I ran an external analysis with eSet, who found nothing. I also ran a Malwarebytes scan which found nothing. SUPERAntiSpyware found some ad/tracking cookies that have been deleted.

  I did a system restore 8 days ago until I noticed that this problem and which did not solve the problem.

  Is there anything else I can do or check to try to solve this problem?

  Thank you.

  I put all the features "do not allow" as a result and now he's going to sleep.

  I'll ocnsider that this closed.

• Portege R500-S5001X will not start

  My Portege R500 arrested last night when displaying "my pictures" and I was not able to do restart upward.

  I removed the battery and turn the direct power, but when I power on I get the Toshiba with "Intel" page in the lower right and five icons feature lower downtown.

  It will not boot to Windows, I know I should know, but I "think" it works under XP.

  I have no recovery disks, he passed to us my father in law a few years ago and no supported drives has come that I can find.

  Can someone help please!

  Thank you
  Tim

  Hey,.

  Can you please verify certain things?

  You can start in safe mode? After you have powered on the notebook press key F8 to access the Windows Advanced Boot menu and select mode.

  If you cannot access the t Windows Advanced Boot menu, you must check the BIOS if the HARD drive is recognized correctly.

• Portege R500 - CD/DVD drive no longer works

  Does anyone found a resolution to this?

  Like David, my DVD Multidrive on my R500 abruptly arrested recently - I can open/close the player, but he does not appear in Windows Explorer as a disk is valid. Do not think that I have nothing installed on the machine.

  Interestingly, I never really use the DVD player. Indeed, because of all the * heat * questions, I used to "Power Off" of the device, via the DVD icon in the system tray (i.e. option enabled me to Power on / off the unit). So while the power was OFF, it's cold the machine, and so the fan was rarely on.

  Now that my computer no longer recognizes the drive, this icon it simply shows that disabled, no possibility to the power on/off switch, and this noisy fan is almost always on. In addition, because it seems that the machine tries to recognize the drive subject time at startup, all re-start, reboot the machine now takes a few minutes to start...

  For the optical drive firmware update help? Or is there some other fix?

  Hello

  > but my Portege R500 CD/DVD drive has stopped working the next day, I had attached an external CD - RW drive for me to burn discs. Maybe it did disable my built-in drive?
  This could be the key;
  Try to access the Device Manager and remove the CD/DVD player listed and all USB host controllers and USB root hub.

  Again, restart the laptop.
  After new check restart if the CD/DVD drive has been recognized again.

• Portege R500 - blue screen after installing Windows XP SP3 home edition

  * computer toshiba Portege R500 laptop *.

  * non-modele ppr50e00j00fs4 *.

  SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

  If I try to start with the InstallationRecommandations, I get the following message:

  STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

  Can someone help me please?

  Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182/en-us/

  Microsoft has stated that:

  + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

  + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
  + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
  + Incompatible video card drivers. +
  + A chauffeur service or system device damaged. +
  + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

  I recommend checking the solution proposals published on the website of Ms.

  Good bye