Portege R500: Explorer crashes cured by installing the Driver Sound R600

Similar Questions

• Portege Z930 - new Windows 7 and installing the driver

  I have a Toshiba Portege Z930 Ultrabook.

  I don't use it for a while because he was very very slow when navigating or attempt to perform other tasks. I scanned the system with several antivirus (now I have Avast and Fixila, but I also used Kaspersky and Norton) and nothing came.

  Now, I decided to reinstall Windows.
  So, I received a kit of Windows 7 Pro (it's the license granted with the laptop) and I'm fighting for a week to make it work properly.

  Now seems as graphics card does not work, I have most of the hard disk full some old files of windows, etc, etc.

  1. How is the right way to install a new version of windows on this laptop (without the old installation files) and use the accessories available on the laptop (graphics card, fingerprints... tool)

  And YES, I tried all THE drivers available on the Toshiba support successfully section only for the wireless card.

  2. have you had problems with the speed?

  Thank you
  Victor

  Hello

  > Now looks like graphics card does not.

  Does that mean exactly? Graphics card is recognized correctly in the Device Manager?
  In case it is, the driver is installed and works of the GPU.

  What Portege Z930-xxx are you?
  The exact part number might be useful to check the specs of the laptop.

  By the way: the driver / software installation is not very difficult.
  Forget the other Toshiba software if you n t want to install it
  Pick up the pilots only...

  However, some parts of the software as a value-added Package must be installed because this package installs a range of important public services.

• Turbo Tax CD setup.exe file not available in Explorer. CD is listed in the Explorer with an Apple on the drive.

  My Turbo Tax CD does not start automatically with the initial insertion in the CD player.  The CD is listed in the Explorer with an Apple on the drive.  The Explorer does not list the file setup.exe on the CD.  However, he lists a few other folders.  I use Vista to try to load the CD.  The CD does very well on my XP computer.  Is there a problem with Vista with the CD that are for MAC and Windows PC?

  Hi Undertaker Farmer,

   

  Welcome to Microsoft Answers Forums.

  • You get the error message?
  • What is the edition of Windows vista installed on the computer?

  TurboTax is a non-Microsoft program and we are not trained in this regard. However I will try my best to help you. Please, follow these tips and see if it works.

  As a work around you perhaps activate the AutoPlay for the CD and check if the auto play works.

  When you turn automatic playback, you can choose what should happen when you insert different types of digital media into your computer. For example, you can choose what digital media player is used to play CDs. When AutoPlay is disabled, you are prompted to choose what you want to do when you insert media files in your computer.

  1. Open AutoPlay by clicking the Start button, clicking Control Panel, on material and audioand then click AutoPlay.
  2. Do one of the following:
     • To turn AutoPlay on, select the Use AutoPlay for all media and devices check box.
     • To turn AutoPlay off, clear the Use AutoPlay for all media and devices check box.
  3. Click Save.

  You can also try to copy all the contents of the CD to the hard drive and try to install and check.

  You can also try to run the file Setup from the command prompt and check what is happening.

  Click Start and type cmd and press enter in the command prompt window type the following command : \setup.exe and press ENTER.

  See also the link below for the site of TurboTax on the requirements and check if your computer meets the condition.

  TurboTax 2008 system requirements

  http://TurboTax.Intuit.com/support/kb/installing/system-requirements/6389.html

  If fail steps above I would suggest that you contact TurboTax support for more options, see the link below.

  http://community.Intuit.com/QuickBooks

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

  As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

  Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

  Best regards

  -Alvin Hu

  Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• Windows 7 will not install the driver for hp deskjet 6540

  I followed all the instructions on the site of HP and windows will not find and install the driver for my HP 6540. How to make Windows do what should or is there a reliable place to download the driver from?

  There is a driver recommended relatively complete for the Deskjet 6540 written by HP and Microsoft via Windows Update.  If the automatic install does not work, perform the following steps: connect the printer by USB.  Click Start, devices and printers, adding a printer, select the appropriate port and when the list of printers, click Windows Update in the lower right part of the dialog box.  It will take a few minutes for the update to complete, once that he choose the Deskjet HP (Hewlett-Packard no) 6500 Series.

  If for some reason you can't use the driver provided through Windows Update, you can download the driver from the Windows Catalog site.  The Windows Catalog site requires the use of Internet Explorer.  For the Dsekjet 6500 Series there are three drivers listed.  11.4 Mo is the x 86 32-bit driver.  11.6 Mb file is x 64 64 bit version.  13.9 MB file is the least common architecture IA64.

• GarageBand wasn't able to install the new sounds

  I'm under GarageBand 10.1.2 & OS X El Capitan 10.11.6 on a Macbook Pro 13 retina "(2016).

  A couple of weeks, that I have installed additional drummers with no problems. I noticed, however, that many of the sounds in the sound library had an icon to download next to them; so I went to the GarageBand menu, option "Sound Library / download all the available sounds" and they begin to download immediately. Most of them have installed fine (and is still usable), but at some point the download has stopped and a window appeared with the message "GarageBand wasn't able to install the new sounds. Close and re-open GarageBand to download and install again. »

  Since then, whenever I open GarageBand, downloading continues automatically, but after a few minutes I get the same annoying message.

  I searched the Internet and tried all the following without success:

  (1) closed and reopened GarageBand

  (2) given in market system

  (3) delete the folder "/ private/var/folders/lq/nb_0wt4d1zq5rs933745flww0000gn ' and all its contents

  (4) remove the "user/Library/Caches" folder and all its contents

  (5) the latest version of Java from Oracle (update version 8 101 - build 1.8.0_101 - b13)

  I always feel the same frustrating lock when I open GarageBand (download starts and after a while it stops and the error message shows up again... and again once).

  I've included some screenshots on this post below, which illustrate the issue.

  Thanks in advance for any help you can provide me with!

  

  

  Just to be sure - you have enough free storage to install all the new sounds? The instrument only GarageBand library has 14GB on my Mac.

  Until you try to install the sounds still launch the Console application and look for messages of diagnosis in the Console, when GarageBand gives the error message.  Are there clues, all messages associated with GarageBand in the Console window?

  Sometimes third part applications or incompatible system additions could cause this kind of problem, as firewall and antivirus software, for example, Little Snitch or Kaperski. If you have any of these installed, disable it before attempting to download the software.

  To prevent the non-standard extensions system to interfere, restart the Mac in Mode safe, before you try to install again, see: try safe mode if your Mac does not commissioning - Apple Support

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• Installing the driver LAN WXP on Tecra A7

  Hello

  I do not have a source more to install WINDOS XP on my Tecra A7 (PTA71E). I reinstalled Windows XP but I'm stuck at the level of the LAN driver, I downloaded the driver on the toshiba site, but in files, only one file "PROUnstl.exe" is a possible, and is a desinsatllation file. How to install the driver from downloaded files
  Thank you

  List of files
  e1000msg.dll
  EtCo32.dll
  NicCo32.dll
  NicIn32.dll
  PROUnstl.exe
  TVERSION. XML
  e1e5032. DIN
  E1e5032.sys
  e1e5132.cat
  e1e5132. DIN
  e1e5132.inf
  E1e5132.sys
  iAMT.cat
  IAMT.din
  IAMT.inf
  IAMT2K.sys
  IAMT03.sys
  IAMTXP.sys
  iresol.cat
  iresol.inf
  verfile. ICT

  If you get this message, it means that the LAN driver is already installed.
  What is the status of the network (Ethernet controller) card in Device Manager?
  You should be able to find the network adapter in the network adapters box.

• Pavilion dv3: cannot install the driver for graphics (Clubhouse dv3)

  Hello! I can't find and install the driver for graphics card. I see on the device manager that without "ATI radeon 5400 series.

  someone help me! Thank you

  Hi @QuanTrinh

  Welcome to the Forums of HP Support! I want you to meet some problems to find a graphics driver. I'll be happy to help you with that. Let me start by getting your product number , there are a number of dv3 models in this series. I also need to confirm that you are using Windows 7 32 - bit as well.

• L750D-14R satellite - cannot install the driver for the TouchPad Win7

  Hello

  I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
  "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

  If someone knows what can go wrong and how can I fix this problem I would appriciate it.

  Never had any problems with installing the touchpad driver.
  I guess its not the touchpad driver problem but the problem with your system.

  First, you must uninstall the old driver for the touchpad.
  This can be done in the control panel-> programs & features

  Clean the system using some freeware like for instance CCLeaner tools.
  Restart the laptop between procedures.

  Then download driver Synaptics driver Toshiba UE page.
  Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
  In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How to install the driver dv6 6165tx UEFI?

  Hello...

  Guys it's Marie Laure could you help me with my problem.

  I have a laptop hp pavilion dv6 6165 tx... so, during statup operating system is showing that the the system fan is not working properly - F(1B) and I want to install UEFI driver for this problem to be solved.

  IAM unable to install UEFI driver using my flash drive. During the installation, it's show to make a partion on the disk.

  So, how to make this partition and install the driver from the UEFI. If anyone can help, it will be a great relief for me.

  Sorry, but try to install UEFI utility or support environment will not solve your problem. Most likely, you will need to clean or replace the fan to make the error message disappears.

  Please send BRAVO

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.