Portege R500 (PPR50E) speaker does not mute when headphones plugged

Similar Questions

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• LAN does not connect when I plug

  Machine model: Hp 4530 s

  Operating system: Win 7 64 bit

  Hay

  I'm trying to connect to internet through my LAN broadband, but when I plug the machine in, nothing happens.

  I have to connect to internet via LAN as my Wifi router is out of use.

  When I bought this laptop, I test once LAN and it worked.
  Now, nothing is happening, I tried to restart the machine, etc..

  Auto updates are on, I could get the updated driver, I don't know about that.

  Help please, thank you.

  This is your problem.  You are indeed right, that they are not supposed to look like that.  Each of these axes is a PIN on the ethernet cable.  If one of these pins is not, or not aligned properly, you will receive all the data ever.  This explains why Windows detects ethernet controller (which it does not normally when the hardware has failed), as well as why you do not get the activity lights.

  If you had only your laptop for two years and a half months you need to contact HP directly and have the laptop repaired while it is still under warranty.  I have a link that will be useful to get this process started for you.

  The link takes you to a form to fill out.  Once you fill it and she is treated, it will give you the computer warranty information, a file number and the phone number to call.

  HP Technical Support call case forms.

• Portege R500 - DVD player does not work

  Hello
  I love my laptop Portege I bought this month of September. The only thing is that the DVD player is not working for some time.
  -When I put a DVD or CD, I realize I can't freely turn the disc in the drive while it is still open. Strange, but I don't see anything blocking the rotation of the disk.
  -The system does not recognize at all have a DVD player. Initially, it worked, I can't say exactly when it went wrong. I checked with Toshiba Assist: in the information panel, it shows no info on the DVD player, in diagnostic Panel, I have the opportunity to check the DVD but when the test system is just jump the operation all the time, indicating that the Player cannot be found.
  -In the control panel I don't see no more among the hardvers
  -For starting, the DVD is one last thing to check in my BIOS settings. But in fact when the start-up the laptop I can hear the sound of the reader looking for something inside, turning or trying to rotate the disc, but it seems always becomes stuck and starting takes like 5-7 minutes due to lengthy trials, get the DVD player work in vain.
  -Now even when I put the energy setting to oriented perf, I no longer hear the system would look for DVD (setting the player gets off everything when using not saving)

  Someone from Toshiba support could help me? Is it possible to check this problem with the remote connection to my laptop, or something? Or should I take it to the service? With this, I also have a little challenge: I bought my laptop in Hungary, but now I stay in Japan throughout the year. So I would need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible, direct mail also. Thanks in advance!

  > Could someone support for Toshiba to help me?
  To do this, you will need to get in touch with the Toshiba ASP in your country.
  Here in the forum you can get suggestions form common users because it s a user forum to ;)

  > Is it possible to check this problem with the remote connection to my laptop, or something?
  I doubt that this is possible since this could be a hardware problem

  > Or should I take it to the service?
  Maybe this would be the best

  > I need a station in Tokyo where they accept my European warranty. Could you please provide me with any help or ideas? If possible by direct mail also
  On the page of Toshiba Europe, I was able to find an info on TOSHIBA EMEA LIMITED WARRANTY for NOTEBOOKS.
  This warranty is applicable only in the EMEA region (Europe, Middle East and Africa) and can be executed in any
  Countries the EMEA where Toshiba or its Service providers allowed offers warranty service terms and conditions provided for in the present
  warranty. This warranty covers the costs of service parts and labor needed to restore your system to full operational status.

  As you can see in the Japan is not covered by the EMEA region :( So I doubt that the warranty will cover the costs to the Japan.

• Portege R500 - Ctrl Key does not

  Hi guys

  I have two toshiba portege r500, who never really be used since buying about 2 years ago.

  Today I don't have one to begin to use it and find that the CTRL key is not working that I thought it was strange.
  After browsing a bit I couldn't find a solution then I'm just another identical laptop on and from using them to find exactly a problem only.

  Laptops are both under XP.
  I reformatted and uninstalled the keyboard driver to see if that would solve the problem but it did not.

  All others. Many have suggested that this may be due to a damaged cable keyboard but I think that it would be very likely that they would both violate the same way.

  Thanks in advance

  Connect an external USB keyboard and check if the button would work.
  If the button can be used with the external keyboard, then the internal keyboard is faulty and must be replaced.

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• envy15: sound does not work when I plug my HDMI port monitor

  I have a new HP Envy15laptop and an older AcerAC2016W with VGA connection.  I bought a cable adapts hdmi vga.  When I plug my monitor, the noise stops.  If I unplug the monitor portable speakers work fine.

  Hi, l

  I do not know what VGA to HDMI Cable you speak but VGA does not carry sound and your machine can judge use HDMI audio so it stops sound with HDMI, if you want to use the sound on your computer, you should disable the HDMI sound:

  Right click on speaker icon > devices back select Play

  Select use internal sound and turn off the HDMI sound (if it is there)

  You will need to enable when using pure HDMI (IE HDMI to HDMI TV for example)

  Kind regards.

• Recent problem that the Autoplay menu does not appear when I plug my digital cameras and devices on Windows Vista

  Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.

  The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.

  I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options.  CD and USB sticks work very well.

  I have Windows Vista.  I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista.  I tried to turn it around by using their dose, but it doesn't seem to help.

  Any ideas anyone?

  Hi - my problem is now solved.

  Not long after reading the post above the laptop crashed and had to have a replacement hard drive.

  I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.

  Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.

  Thanks a lot for your help.

• ORA-27101: shared memory realm does not exist when you plug in PDB

  I have installed oracle 12 c on Redhat 6. The creation of the CBD and the PDB has everything successful.

  SQL > select name, open_mode from v$ PDB;

  NAME OPEN_MODE

  ------------------------------ ----------

  PDB$ SEEDS IN READ ONLY

  CMS121P1 READING WRITING

  FUN121P1 READING WRITING

  SQL > select name, con_id from v$ active_services;

  NAME                                                                 CON_ID

  ---------------------------------------------------------------- ----------

  fun121p1                                                                  4

  cms121p1                                                                  3

  o121cdbXDB                                                                1

  o121cdb                                                                   1

  SYS$BACKGROUND                                                            1

  SYS$USERS                                                                 1

  6 selected lines.

  I myself created a user by changing the container and the username (jehan)

  Now, strange things happened:

  1. the CBD or PDB has not been placed on earpiece. even I ran

  "exec dbms_service.start_service ('cms121p1');

  I had to manually add the entries for all PDB and CDB files.

  2. I can not connect to any of the PDB sqlplus, even they are open and online

  bash - $4.1 sqlplus jehan/passwd@localhost:1521/fun121p1

  SQL * more: Production of liberation 12.1.0.1.0 Thu Aug 22 11:23:28 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Process ID: 0

  Session IDs: serial number 0: 0

  I used DBCA to wipe the entire base (CBD & APB) and to recreate them again. always the same results. Everyone runs the same issue as mine?

  Thank you!

  Oh my god!

  After that I enabled tracing for the listener. I found, he complains about "reject the registration of 127.0.0.1.

  It reminds me to check the file/etc/hosts

  I found there are multiple entries for the same hostname like this:

  127.0.0.1 testhost.dev testhost

  10.126.1.36 testhost.dev testhost

  After removing that 127.0.0.1 line, Vooola! everything works now!

  Thank you for your options. Javie your blog is awesome, I am now.

• Built in speaker does not work when I pull the external speaker cable

  I have 2 speakers system and external speaker. My external speaker are out of order, so I pull his cable system but now built in speakers are also not working. Volum icon shows with cross and no speakerphone and headset available. Any solution

  Hello
  When you said "pull the cables" do you mean deleted the connection to the motherboard / sound?
  1. make sure that each connection is connected.
  2 reinstall the audio drivers.

  Click on Start , then Control Panel

  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

  b Eddie

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Portege R500 - freezes and does not

  Hello!

  a few minutes ago my laptop fixed, that he was not answering anything, even a movement of the mouse and I could hear the sound strange from the lower left as something began to turn and then suddenly stopping with the 'yyyyk' sound and the CD/DVD drive is located on the right side so it was that for sure , but the sound was somewhat similar.

  After a minute or so of spinning and stop the screen went black, then he turned blue with a text very quickly so that I could read only that Windows found a problem the laptop rebooted and then flashed blue screen again, after that, it went black and I could choose only to repair using the Windows cd (but I left it at home so I could not) or start Windows normally, so I started it normally, and it seems to be great so far.

  The strange sound of spinning, I heard only once before but the laptop was just a bit slow but do not freeze or restart has occurred and it happened months ago so I thought it's nothing serious. The laptop is 6 months old, warranty, with the original software and I treat it gently (never fallen etc.). Nearest authorized is way far from my place and I can't be left without the computer right now (review session).

  What can I do to check the laptop by myself (I don't want to take it apart, I'm a girl)? Maybe some software that I could run and it will report errors? Any ideas what was that noise? The first thing I though about was the hard drive so I already started to save my valuable data...

  Thx for any help/ideas :)

  > The laptop is old, warranty, with the original software for 6 months and I treat gently (never fallen etc.). Nearest authorized is way far from my place and I can't be left without the computer right now (review session). What can I do to check the laptop by myself (I don't want to take it apart, I'm a girl)? Maybe some software that I could run and it will report errors? Any ideas what was that noise?

  Such sound could be developed by the different parties.
  Usually it's not easy to say exactly what's wrong.
  In most cases we can only assume (as the pyoc1_1 of the user), but these are own personal suggestions.

  The strange sound could be developed in HDD or cooling module.
  As Luke proposed, the HARD drive can be tested using the Drive Fitness Test software but the cooling modules can be tested in only by a Toshiba ASP.

  I understand that the nearest ASP is very far, but I think you should always communicate with guys in order to get more details how to handle this problem. I mean the laptop is under warranty, so everything should be done for free.

  I highly recommend containing the ASP in your country.

  Welcome them
  Jeffrey

• My Skullcandy headphones does not work when I plug them into windows 8

  Hello

  I am using windows 7 and have the same problem.  When you use the headset on my pc I can hear the other person, but they can't hear me. Can you please indicate

  Thank you

  J

  Thanks for the reply. As this issue is specific to Google Lair, I suggest you try uninstall and then reinstall the application and check to see if it helps.

• iPhone5 does not ring when it is locked

  iPhone5-16 G-

  iOS 9.3.1

  My iphone5 does not ring when it is locked

  during a call if I press the power button or any key, it sounds

  I checked "do not disturb" and silent and other key

  Hi mehdi.gh,

  Thank you for using communities Support from Apple!

  I understand that your iPhone sounds when it is locked. I see that you have already tried a few great troubleshooting as well.

  To continue troubleshooting, I suggest reading and working through the information in the following article. Some of these steps you have already performed, but for completeness, I suggest to work through all the steps.

  If you hear no sound or distorted sound from your iPhone, iPad or iPod touch speaker - Apple Support

  See you soon!

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?