Portege R705 - exit HDMI has stopped working

Similar Questions

• Portege R500 - Flashcard Toshiba has stopped working

  Hello

  I get this error "Toshiba Flashcard has stopped working and will be closed" when I start my laptop Portege R500.
  What is the cause?

  I'm running Vista and my PC continues to run even if it does.

  See you soon,.
  Elty

  Hello

  It's not easy to say what causes this problem.
  In most cases to other parts of the software may affect the functionality of different applications.
  For example, my flash card stopped working after Vista ran some updates.

  I simply removed the old VAP (value added package) of the system.
  I cleaned the registry and the system using CCleaner (free tool) and reinstalled again the VAP.

  Now everything works fine.

  I think you should try the same too.
  Remove the VAP and installed as the new VAP downloaded from the page of European driver of Toshiba.

  Check it out!

• When upgraded to windows 8 hdmi has stopped working, ATI driver driver HD 5000 series no longer works

  Hi here is my setup:

  Laptop: graphic Driver HP TM2-2000el, OS Windows 8 Pro, ATI Mobility Radeon HD 5000 series.

  Problem: When I've upgraded to Windows 8, the ATI graphics driver has stopped working, actually it works with the intel HD built in driver. In fact, I can't send the HDMI signal to my TV. I downloaded the last Catalyst AMD released on April 24, 2013, the regular and the beta version, but do not work. On the Device Manager error code 10 (impossible to boot the machine).

  If someone has worked on this problem of wrong answer please

  Problem solved with this driver:

  http://leshcatlabs.NET/index.php/2012/12/leshcats-catalyst-12-11-Beta-11-unifl-WIN8/

• HDMI has stopped working after the upgrade to windows 8 Pro

  Hi all

  After upgrading my laptop to Windows 7 Ultimate for Windows 8 Pro (upgrade of the place) my HDMI output not working anymore.
  I use a nvidia Geforce 8200 M G graphics card, went to their website and downloaded the drivers of windows 8, but this did not help.
  Is what is happening when I plug the HDMI cable, the laptop screen goes black and there is no output to the TV I am trying to connect to. However, when you remove the HDMI cable, the laptop screen does not return to normal, but still rather dark. I tried pressing + P, but it does not help, and ultimately, I can't get the laptop screen showing something by a full reboot.
  Someone has a bright idea?
  Thank you!

  SOLVED (for me at least)

  I had the same problem after I upgraded my Acer Aspire 5745PG from Windows 7 to Windows 8. My second monitor via HDMI would not be recognized.
  Here's how I solved it: went to the website of the manufacturer (Acer in my case) and downloaded the NVIDIA for Windows 7 driver and installed it. Installation was a little buggy. I had to restore my computer to an earlier point, twice (make sure that you create a restore point before you start just in case where; google if you don't know how).
  In the end, the installation was successful. I plugged in my HDMI cable and second screen has increased as before I upgraded.

  IMPORTANT: Do NOT download the driver from the website of the manufacturer of the graphics card (NVIDIA, AMD, Intel,...). Go to the Web site (HP, Acer, Dell, etc.) of the manufacturer of your PC and find the. I tried the driver from NVIDIA that I have a NVIDIA Geforce Graphics card and it would not install. If you find that several display drivers for your specific PC model on the manufacturer's website you can try then one by one. I found 3 NVIDIA for my Acer 5745P. The second was the right thing.

  Good luck everybody!

• Portege M700 and Mobilink has stopped working

  This used to work before but stopped working 3 days ago and I don't know why. I have a USB with Huawei option or insert the SIM card under the battery then use Mobilink. He worked with both but now neither work. In Mobilink, he reports Radio Off and with the USB, it signals that the modem is already in use. WiFi works normally.

  Anyone have any ideas?

  Have you tried to roll back OS to an earlier time using System Restore option?

• Input HDMI Sony Bravia KDL-40BX420 of connected PC has stopped working

  I used my laptop to my Sony Bravia TV using the HDMI ports for more than two years without problem. I unplug it and plug it back on a regular basis without problem. I have returned from a weekend out of town and plugged my laptop back to and kept getting the error on the TV:

  No signal. Check the external source or select another entry with the ENTER key.

  TV:

  Sony Bravia KDL-40BX420

  Laptop:

  HP Pavilion G6 with graphics Intel HD Graphics 3000 with the latest drivers (Intel HD Graphics driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347), 8.1 for Windows 64-bit

  What I tried:

  • Tried it with 3 different HDMI cables (without success)
  • Tried connecting Player DVD TV HDMI ports (successful, plug-and-play)
  • Tried to connect the PC to another TV with cable HDMI listed above (successful, plug-and-play)
  • Tried to reset the TV to factory settings (reset successful, still no PC signal)
  • I tried power reset on the TV (unplugged for a few minutes, connected again, no still no PC signal)
  • Tried to reinstall graphics drivers of PC (Intel HD Graphics Driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347, Intel, installation successful, website still no PC signal)
  • Tried to install the latest graphics drivers from the manufacturer's Web site (Intel high definition (HD), pilot chart, v9.17.10.2843, from the HP website, successful installation, still no PC signal)
  • Tried different resolutions video on the PC, exit in double...
  • Tried different boot sequence, with mixed results:
  • Turn on PC the sound on the TV: no signal.
  • Turn on TV that the sound on PC: I see the logo of the 8 on Windows with white turning points on the TV (double on the PC screen and before arriving at the Windows login screen TV turquoise rounds with the error 'no signal'.) So the HDMI works, but only for a short period of time during the boot sequence for Windows.
  • I tried restoring the system to a restore point not go a week ago (HDMI to TV works well all week), no chance. Still no TV signal, and the PC keyboard has stopped working too. That challenge.

  I'm out of options. Help would be very appreciated. Please just keep in mind that he has worked for more than two years without any special configuration. Just plug and play, as it is supposed to.

  Thanks in advance

  have you tried to connect via HDMI port on your TV?

• Utility power management Portege A100 has stopped working

  The power management utility has stopped working and when I try to save the profile of Laptop/portable power management screen control panel I get a message saying that the power cannot be defined as two revision levels are incompatible.

  I tried to remove and reinstall the Power Management Utility and utility Toshiba but when reinstall I get a fatal error notice and the 0x51A error code. Can anyone help please?

  I suspect that this problem could have been triggered by an update XP or Norton Internet Security.

  Hello

  Maybe the registry is confused upward
  Try to clean and repair the registry using CCleaner. It the free tool.

  Firstly uninstall the energy saver, then clean the registry.
  Download page of the European driver Toshiba Portege A100 Win XP tools and drivers.
  You will need:

  Common module-> must be installed first!
  Energy-saving

  Good luck

• Portege R400-600 - installed some SW and everything has stopped working...

  Hello:

  I installed a few SW and:

  1. the menu that appears at the top of the screen when you press the Fn key with something arrested appear.

  2. the blue icon on the front of the machine that displays the status of the WLAN has stopped working, although the WIFI does not work always.

  3 Toshiba Flashcards started popping up with an error saying they have stopped working - are there flashcards in this machine at all?

  4 then, Control Panel / programs and features / turn Windows features on / off - whatever it is, I would like to add, it ends with an error - "an error occurred when installing the sw.

  5. in addition, tried to upgrade to the latest Toshiba Bluetooth stack. The installation is never - ending crashes

  6. access the hard disk is really slow. Do not know why. Any idea?

  In the old notebooks from Toshiba, I would setup just a package of COMMON MODULE, but I can't find something like this for Vista.

  Any help on this appreciated. Please, send them to [email protected], too.

  Hello Jiri

  As a first step, I will confirm what Robin wrote on the package of added value. Back to your problem: no one knows what kind of software you installed and t is possible that now you have some negative influence on the functionality of Flash cards. Please try to reactivate the flash cards. You can do this next start - all programs-Toshiba-Utilities-Restart Flash Cards.

  To be honest, after installation of some software there are many issues with your laptop nice Portege and maybe you need to restore the operating system to an earlier time using System Restore option. After having done that, I'm sure that everything will be OK again.

• Pressing FN + F5 message: module IGFXEXT has stopped working

  Pressing FN + F5 message: module IGFXEXT has stopped working
  I use Vista
  Model - Portege M700

  With FN + F5, you can switch between monitors.
  The igfxext.ext belongs to the common user interface from Intel and it s stored in the path % system%\igfxext.exe.

  So in your case, I'll try to update the display driver. I think that this is causing the error.
  You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

• HDMI port stopped working on Satellite L655

  Hi all

  I've always been able to connect my laptop to the TV via an HDMI cable, but it has stopped working. Any body had the same problem or knows how to solve? Its model L655.

  Thank you

  Hello

  All you have to do, is to connect the laptop to the TV via an HDMI cable, then choose it right to access on your HDMI TV and finally use the FN + F5 button to switch to the external output.

  By the way: have you tried to reinstall the display/graphic driver?

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• AUDIO DEVICE HAS STOPPED WORKING

  My Audio device (NVIDIA) has stopped working. By clicking on the icon, the following text is displayed:-No. AUDIO DEVICE IS INSTALLED. the icon has now disappeared from the lower r/corner of the screen. Can someone tell me how to restore my audio device. I recently downloaded the SPOTIFY music program.

  The computer is a Compaq Presario, 4 years old and I have windows vista Home premium installed.

  Go to control panel, Sound, on the reading tab, select your speakers and then click set as default below. Click on apply and OK buttons to exit. If you do not find your right speakers click Show devices disabled or show disconnected devices.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• When you try to open a folder I get a pop up Windows has stopped working

  When you try to access this folder and this folder, I get a pop up windows has stopped working. I ran a virus scan, memory diagnostics and now I am at a loss. If I didn't need some files, I would just delete the folder. All my other files and folders work fine and I have Vista. Please help :)

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: mc_dec_mp4v.dll
  Fault Module Version: 8.5.0.14265
  Timestamp of Module error: 4b81ceb4
  Exception code: c0000005
  Exception offset: 00012d2f
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 4105
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Fault Module name: mc_dec_mp4v.dll

  Product name: Mainconcepta® Mpeg - 4 Video Decoder engine
  Description: Mpeg-4 Video Decoder engine

  This codec is try to preview the files in the folder. You can try unstalling the codec or him reassociate the file type (change the default program):

  1. open default programs by clicking the Start button, click default programs.

  2. under "Choose the programs that Windows uses by default", click "associate any type of file or Protocol with a program.

  3. under the parchment of column 'name' down and look for '.mp4 and .mp4v', select one at a time then click on the "Change Program" button at the top right of the box.

  4. in the "open with" box under "Recommended programs", choose another program or click on the Browse button below to select the program you want.

  5 Click to place a check mark in the box "always use the selected program to open this type of file".

  6. click on OK to exit.

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

• Media Center has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Computer: Vista Home Edition Premium, SP2

  My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.

  This is the error in the event log

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2011-08-09 16:49:45
  Event ID: 3084
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: rb - CCP
  Description:
  Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available.  .

  The event XML:
  
   
     
      3084
      0
      2
      3
      0
      0 x 80000000000000
     
      380048
     
     
      Application
      RB - CCP
     
   
   
     
     
      Search.MediaCenterHandler.1
      A server error occurred. Verify that the server is available.
   
  

  Hello

  I suggest you follow the methods and check if it helps.

  Follow the steps below and check if it helps.

  (a) exit any running instance of Windows Media Center.

  (b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:

  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB

  To remove the file, follow these steps:

  i. Click Start and then click Run.

  II. in the Open box, type run and then click OK

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.

  IV. in the details, click pane right mediacenterdatastore.db and then click on remove.

  c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  (c) start Windows Media Center.

  I hope this helps.

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.