Info.plist prompted the start of each

Similar Questions

• could not process info.plist in the API for app...

  Hello

  I have download some apps in "Mobileiron" but with one, I get this message:

  «could not treat info.plist in the API for app...» »

  could be a problem for apple servers?

  Certificate?

  movilprovision?

  Any idea?

  Hello

  Did you ever find out what went wrong? Same problem here.

  Thank you

• RUNDLL error is displayed at the start of each time.

  When I start, this message appears in a small window, I usually just close it, but I want to get rid of it and find out if there is no danger. The message is:

  RUNDLL error loading C:\PROGRA~1\3721\helper.dll the specified module could not be found.

  I looked on the internet but I can't find any solution. I havn't made the latest changes to my laptop.

  System information:

  Microsoft Windows XP Professional Version 2002 Service Pack 2

  Please, any help would be greatly appreciated.

  Thank you

  http://www.pcreview.co.uk/forums/thread-428084.php

  Helper.dll and the specific load error are associated with
  spy | Adware. Better to download and install AdAware and Spybot.
  Activate files and hidden folders and then scan the system to remove the
  parasites.

  Read the info above about helper.dll by mow green MVP...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Desktop shortcuts move at the start of each day

  When I start my PC every day the desktop shortcut moved around, can someone help me understand this issue?  I am on Windows 7
  I'd appreciate any help.

  Using multiple monitors by chance?  If so, this may surface this behavior.  If not, right click on your desktop and point of view.  From there, the options of the United Nations brand the "auto arrange" as the case may be.

• TB hangs at startup between the start of EACH 3-15 x

  This happened since I updated from an earlier version of TB (more than one year ago). Crash Reporter on and for a period of time, also made a comment accompanying the report, as well as the contact me option. Nobody ever helped. I have literally thousands of reports which were presented. Would like to help, please. It is the most recent, although there are 10 others from today, as well.

  BP-72afc6a8-F9EB-4C4A-ADFC-6ddba2150428 28/04/2015 15:17
  BP-021dfbad-654D-4F41-B040-392a92150428 28/04/2015 15:16
  BP-c3c0819a-011c-4F7F-AD1C-fd0f72150428 28/04/2015 15:16
  BP-1f7d9190-ece0-43FF-8DCF-390212150428 28/04/2015 14:46
  BP-7a94c6e0-5142-4ED9-9d9c-fc1ec2150428 28/04/2015 14:46
  28/04/2015 BP-3e50f136-adf6-4c5b-80CD-5ac9a2150428 13:05
  28/04/2015 BP-ba785cf7-2AB2-4176-8a5c-d5d332150428 13:04
  28/04/2015 BP-cbbfc0d0-003e-43a6-b8fe-584242150428 13:04
  BP-6630ba53-0fcf-4F79-BA29-4c27a2150428 28/04/2015 10:30
  BP-b0a5b080-af2b-4EF9-9f00-7fda62150428 28/04/2015 10:29

  You get the idea...
  It seems that the problem is worse when I sent a message before the opening of TB, if this message was sent from my cell phone, or TB on my computer application.

  It seems not completely load messages. And then crashes.

  I wouldn't be surprised if there are some files inherited from a previous version of tuberculosis that causes this. I have emails in this app for more than 15 years, imported at the origin of a paid version of Eudora.

  TB has been actually do much better and don't default at startup close if often with recent versions, but seems to have gotten a LOT worse once again, ever since the last update.

  Help, please.
  Thank you.

  The bug https://bugzilla.mozilla.org/show_bug.cgi?id=541963
  I see listed for first accident suggests to try to disable the new mail arrival sound.

  Menu (Alt + T) tools > options

• Copy of the Batch (.bat) file to the Start Menu for all users User/Each

  Created a lot on each machine (file1.bat) leader to create a queue (file2.bat) of lot for a launch of a page to start windows.

  This is the content of file1.bat:

  off @echo

  @echo > C:\Users\User\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup\file2.bat «»
  @echo start http://www.MSN.com/ > C:\Users\User\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup\file2.bat

  Expected result is to copy the file2.bat to the start of each user profile.  However, the file2.bat is not copied to the Startup Windows 7, 8, 10 folder after the test.

  However, it will work in file1.bat:

  off @echo

  @echo>"C:\Testing\file2.bat
  @echo start http://www.MSN.com/ > C:\Testing\file2.bat

  I have not the network joins a domain.  I need to send the file1.bat to all staff.  I intend to deploy to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup.

  Thanks in advance to all.  Any help is appreciated.

  To run a command as Administrator file, you must click on it & select run as administrator.  Despite being connected with an Admin-level account, individual actions like yours needs as the run as Admin permission.  This is the way Windows works.

  

  You cannot add anything in a batch file to run as an administrator.

  You will see the system's responses to your batch file by adding a last line containing just the word break [test]

  - - - - - - - - - - - - - - - - - - -

  "File2.bat is to launch a web page which start machine"-Yes, I understand that. ""  But using a batch file to do this isn't better than just sending them the URL shortcut to the Web page instead.

  - - - - - - - - - - - - - - - - - - -

  "Wish only to send the file1.bat for users" - you must give them instructions to run as admin.  Since the instructions are necessary in all cases, then you might as well keep it simple by sending them a shortcut in C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup folder and url of msn [shortcut].  In your email, you can tell them to use the first shortcut [Startup folder] to get to the good copy of place and then * the second [msn url] in there, giving approval to the Admin when / if * it is called for.

  Some target computers may have lower security settings [settings "UAC"] meaning permission Admin is not necessary, but since you do not know that in advance, you will have to warn that it may be necessary.

  If there are multiple users on each computer only one of them has to do this on each machine.  You must choose a user who is either an Admin user who knows the password for this computer.  If you ask each individual user to do this, then only the first will be something to see; others may follow your instructions, but they will see that it has already been done and he can stop then.

  - - - - - - - - - - - - - - - - - - -

  It is difficult to tell many users on many different computers to do something.  Some will ignore your instructions & do nothing.  Some will try to comply, but will make mistakes.  Some will do what you want.  You won't know the results even if you ask them to email you back to let you know.

  Denis

• Get read and write access to the info.plist file

  Hello, I tried to get the permission of R/W to info.plist but some how I could not make it through. I know that many of you already have this problem, I'm looking everywhere, but he do not workout for me, here's the screenshots as well. Can someone please share the solution. Thank you

  

  You must disable SIP starting in local catering and disable execution of csrutil. What year/model is your Mac, which requires Bootcamp Info.plist file changes?

• By clicking on an elements of the taskbar (or on the Start Menu) ask me each time if I really want to open this file. How to stop this?

  When I click on the item to taskbar Windows 7 to Firefox (or on the Start Menu, too), he asks me each time if I really want to open this file:

  ... \ick Launch\User Pinned\TaskBar\Mozilla Firefox.lnk

  I say YES and it opens... until next time, when he asks again.

  But a double click on the shortcut of Firefox on my desktop doesn't only!

  I tried unpin and re-pinnning program without success.

  I tried to create the pinning of the original exe or shortcut on the desktop or the StartMenu option.

  All have them!  And it has worked perfectly well for years, but I had to reinstall FF today and now it goes.

  How can I stop this annoying feature?

  I found a column that actually addressed this and he said to go to the CMD prompt and enter:

  ICACLS '%programdata%\Microsoft\Windows\Start start\program' /Setintegritylevel (OI) (CI) Medium

  Tried without success.

  Another site told me to uncheck the box that says "ask before opening" but there is no such box on the pop-up.

  Maybe because it's a .lnk instead of a .exe?  I do not know.

  Please do not suggest that I use IE or Chrome instead.  I use IE much... but there are some things that Firefox is just the right solution for.

  Thank you!

  Hi MiloInSanDiego

  The response of the creation of a new user account was because after the steps mentioned by Babu, you said in the post on Jan 3 that you get this message 'Do you want to allow the following program to make changes on this computer' like this could be due to the virus.

  By creating a new user account, if there is a corruption of the profile by a virus, it will be there in the new profile. This is the reason for the creation of a new user profile.

  If you are facing problems with Firefox, I suggest you to post the question in this forum for better support.

  http://support.Mozilla.org/en-us/KB/get-community-support

  Using the windows-related issues feel free to post on Microsoft Community.

• Everytime I open Firefox I am prompted to open a .dmg file and instead to open the Start Page, it goes to the Firefox downloads. How can I stop this?

  I just want to open Firefox to the start page, but appears as a second tab. The first tab is always downloads of Firefox and I am prompted to open or save a .dmg file. I have dragged this file to the trash, empty the trash, and it blocks not always invites me. I just want to open Firefox and get the start page. How to achieve this?

  Firefox tries to update, go to the ADVANCE and then UPDATE and uncheck automatically download and install the update.

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• command prompt in the start menu goes directly to the control box black small and not big box

  Page product HP supposed to go to the start menu and type command prompt and choose Run as administrator.  There was a break in the screen of the typical white box with blue borders with a list of options.

  I typed in it and click on command prompt and I immediately had the window of small black command promt.

  I had to end up with a box by C:\. SFC\ and type SCANNOW after the.

  I can only see C: \USERS\OWNER >

  How can I get the usual box of options?

  Hello viewerx. C: \USERS\OWNER is always the default value in Windows Vista or later, even if you change it manually. You try to perform a file system check? If so, the command is "sfc/scannow" without the quotes.

  If you have any questions or concerns, please let me know. I'm only here to help!

  Mario

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• Old iOS that app is improved with a new generation of Air is not verified by the Apple Store because of the limitations of UIRequiredDeviceCapabilities in the info.plist file

  We ordered to upgrade an old iOS/Android app.

  We have developed the new app with Flash Professional CC (Build 15.0.1.179) + Adobe Air (19.0.0.190) for the two operating systems. No problem on Android. Apart from a bit of work by removing the prefix app id air.

  Also construction parts new and several dimmer on iOS was perfectly conducted.

  The issue raised during the passage of the generation of production to the audit. The error returned is

  The APP's info.plist can contain the value of the UIRequiredDeviceCapabilities key that would prevent this app to open on any iOS device.

  After a lot of searching on Google without solutions, we realized that the problem is that the old version of the app has no restrictions of use, while the new! In fact AIR compiler automatically inserts this pair of values in the info.plist file

  
  

  < key > UIRequiredDeviceCapabilities < / key >

  < table >

  < string > armv7 < / string >

  < string > opengles-2 < / string >

  < / array >

  which means the new app cares something and will not let the devices to run itself!

  This two capabilities of our reviews are almost useless as soon as iOS version 7 + (according to the guidelines of our generation) does not require the

  < key > MinimumOSVersion < / key >

  < string > 7.0 < / string >

  in any case it is

  How to remove this key in the info.plist file?

  It is our opinion that Adobe needs to find a solution in the compilation process, because if these required features are mandatory, it is virtually impossible to migrate from almost any old application to the air framework, which seems nonsense.

  Hope someone can help us.

  Thank you

  Luigi

  I finally found a solution for this problem and want to share it here to help all developers have the same problem.

  I have downloaded an application for Mac, called AirSign (https://www.airsignapp.com/), which allows to edit and re-sign .ipa assuming you have good certificates and provisioning profile.

  By using this application, I have delete the unwanted required functions (opengles-2 and armv7) then export to Xcode Archive.

  Then I opened archive with XCode and packed the new .ipa from there.

  Finally, I downloaded the App loaderipa.

  Note that AirSign can repack the ipa, but for some reason, I don't know it is not accepted when downloading with the Application Loader.

  I really hope this can help, and I'm guessing why Adobe is not interested in this problem.

  Ciao

  Luigi

• Download of AIR for IOS via the Application Loader I get the following error - the package does not contain a file Info.plist.

  I publish a .fla in the AIR for IOS.

  I'm in 2014 CC, so first I need to know what AIR I should publish in?

  more recent is AIR 14.0.0.178 for IOS

  IOS deployment type is App Store

  published with no error.

  I see that the following files included app.xml and .swf

  I converted the .ipa to a zip file

  Download through the Application Loader, I get the following error

  The package does not contain a file Info.plist.

  Here is the infoplist for that and convert the .ipa and the info in a zip file?

  I converted the .ipa in a zip file and the intoplist file is NOT THERE how to generate this?

  Any help here?

  the most recent is 16 +, Download Adobe AIR SDK

• It binary that you downloaded was not valid. The key CFBundleShortVersionString [2.1] value in the file Info.plist must contain a newer version than the version of the previously uploaded version [2.1].

  It binary that you downloaded was not valid. The key CFBundleShortVersionString [2.1] value in the file Info.plist must contain a newer version than the version of the previously uploaded version [2.1].

  You will need to contact technical support for assistance, they will need to change it on the backend so your bundle what ID is more than what you already have in the store. Are you a customer of simple editing or a Pro/business client?

  Neil