Portege R830 blue screen

Similar Questions

• Portege M100: Blue screen during recovery

  Described in the manual involving cd recovery results in blue screen of recovery: fault: 0X0000007B (7 B 94528, OXC 00000034, OX00000000, who can help me?

  Hello

  On this path, it is not easy to say what may be the problem. Check Microsoft solutions for this error message on Microsoft Knowledge Base. Q122926

• Portege R500 - blue screen after installing Windows XP SP3 home edition

  * computer toshiba Portege R500 laptop *.

  * non-modele ppr50e00j00fs4 *.

  SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

  If I try to start with the InstallationRecommandations, I get the following message:

  STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

  Can someone help me please?

  Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182/en-us/

  Microsoft has stated that:

  + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

  + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
  + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
  + Incompatible video card drivers. +
  + A chauffeur service or system device damaged. +
  + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

  I recommend checking the solution proposals published on the website of Ms.

  Good bye

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• USB 2.0 blue screens on Portege R100

  Hello
  I have a Portege R100, when you insert a USB 2.0 device it blue screens and you can t do something. But if you insert a USB 1.1 device, he is very well, I tried the upgrade to Windows XP sp2 and this t hasn't helped any ideas.

  Thansks

  Hello

  Try to remove the USB entries in Device Manager, and then restart the device. The ports should be recognized and installed correctly. In my view, it cannot happen without any reason. It will be interesting to know since when this problem started.

• Portege Z30-A-1E1 - blue screen and reboot

  Hello

  I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

  I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
  In the event log windows that I can't find anything that clearly led to a cause.

  I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

  Anyone had a problem like this?
  Any suggestions for debugging?

  Thank you very much!

  Hello

  I don't have a complete solution, but perhaps a step on the way.
  I would say first to disable the auto restart when a blue screen appears.
  This way the error message will remain on the screen until the PC is turned off.

  Know how prevents automatic restarts here:
  http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

  Tom BR

• Portege Z10 stucks on blue screen - cannot open a session

  My system has issues where I couldn't get in the restoration of the system as it was not appearing
  so went to msconfig and I went to start advanced and chose to go into diagnostic mode and restart it now has just a blue screen.

  I can move the mouse and there is no login box?

  I tried reboot and pressing F8 but no luck.
  Is there another workaround for this?

  Help, please!

  Turn on the computer, press and hold the "F12" key while the Toshiba logo appears.
  An alternative you can press on and press "0" to access the recovery option.
  Select "HDD Recovery" and confirm by selecting 'Yes' that you want to enter the system recovery.

  More information:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

• Portege R700 3G - blue screen WwanUsbMp.sys

  Hello

  We have two Portégé R700 (first part no PT311E-01G01JEN) bought 2 months apart, but both with the same problem. All of our other laptops of the same model running Windows XP and do not have this problem.

  Windows 7 32 - bit freezes or blue screening at all times when it is connected to 3G in Ericsson device using the. Blue screens give a message "IRQL not less or equal to" and creates a crash dump file that points to a problem with WwanUsbMp.sys

  Both machines above using the standard image of Toshiba Windows 7 that comes pre-installed. Both have the Citrix DNE for Windows 7 installed [(see here) update | http://www.citrix.com/lang/English/lp/lp_1680845.asp] and the Cisco VPN Client v5.0.07.0410.

  A laptop computer uses the 3G of the image of Toshiba driver, while the other has been upgraded to the latest version available from Toshiba.

  The problem is persistent, and led to an accident, after which it either from 2 to 20 minutes when it is connected to a 3G network, but is yet collapsed when connected via GPRS or EDGE, although he made a blue screen after the computer was put into hibernation when you are connected to the GPRS on one occasion.

  Forums for other manufacturers show problems with this particular Ericsson device state to update the firmware, but as an OEM device, the firmware must come from the manufacturer of the laptop and Toshiba claim there is no all available.

  Has anyone else seen this problem? Any suggestions?

  See you soon

  Andy

  Hi mate

  Have you tried a pilot 3G update?
  You can find it on the European driver Toshiba page.
  Currently, there is a 3 G Driver v r2y04 out to the 28/09/10.
  Please check if you can use this new driver

• Portege R100 - Random Blue Screen of Death (IRQL not less or equivalent)

  Hello

  I've been making 'Blue Screen of Death' screens random in the last few weeks. The error is "IRQL not less or equal ' and it performs a memory dump each time. If I get the error and try to restart the phone after, I usually get the same screen of "Blue Screen of Death" when starting.

  I have not installed new hardware lately. Last update about a year; upgrade memory. I tried to replace the RAM with a spare that I had and I was still getting the same error.
  I have not installed new software in the last weeks, which would coincide with this error.

  I am tracking the temperature of the processor and I'm higher than 48 degrees Celsius.
  I'm not an expert, but I guess it's purely a hardware problem? As I rarely hear the CPU fan, I thought it might be overheating of the CPU.

  But even after that make the CPU fan to operate at 100% using a free software called "Fan speed" I always got the same random screen of 'Blue Screen of Death'.

  I would really appreciate any feedback and assistance. Really, I love my R100 and want to fix it.

  Select this option.

  Hey,.

  > If it's the memory controller can it be replaced?
  No, you can only replace the motherboard together. The memory controller is a part of it and it of not possible to replace the memory controller only.

  Theoretically, it could be the motherboard (memory controller) to malfunction if Memtest86 errors even you have replaced the RAM already.

  But 100% sure answer you can get a service provider approved because they have professional diagnostic tools.
  Then get in touch with the guy and ask for help. They can also order a new card of mother if she needs to be replaced.

• Portege R830: changing wallpaper

  I want to have a background screen or different wallpaper of the Toshiba one.
  I cannot put through windows. I use a Portege R830 and Windows 7.

  MIA.

  The Office can be customized.

  Make a right click on desktop-> customize

  Now, you can check all the available themes, which also contains background pictures.

  Save the changes.

• Sound when Portege R830 is anchored and display lid is closed

  I have a fairly new Toshiba Portege R830 laptop (PT321E-01E00YEN) who don't use speakers integrated if it is placed in a dock with the closed laptop screen or the microphone.

  This causes problems when you try to work from only an external monitor, but when I flip the lid open, it works fine.

  I am using a replication of port II (PA3916B) and once installed a month ago, all device etc drivers has been updated to the lasted available so I think that there is a software configuration option that just needs to check or disabling.

  No one knows where that might be?

  I test this on an another older duplicator that has been purchased for a R700-15R and have exactly the same problem, so I don't think it is hardware related.

  Any help would be greatly appreciated :-)

  Please don't get me wrong, but to me this behavious seems logical. When you close the lid internal speaker and microphone placed close to the cam are blocked so I don't know how you want to use.
  When the laptop is closed and set aside, it's almost the same as the office. All devices that you need should be connected to the docking station and external devices.

  If you use your laptop on a regular route, but they also appear external to office extension, you can use all the internal devices to your laptop.

  In my opinion the point of berthing of the use of the station of different devices to your laptop, but using the docking station, you can remove the laptop and take it with you without disconnection of all connected devices, including the power supply.

  To be honest, I see here no problem. You can contact Toshiba service nearest and ask for opinions, but I'm sure the answer will be the same.

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• Portege R830 - use of fingerprinting as part of Windows 8

  I have big problems with two drivers Toshiba on my Portege R830 computer in Win 8 Pro 64 bit upgrade.

  I did a clean update on a reformatted hard drive, then went to install display drivers and that totally crashed my machine out.

  When I put in my IDs of the machine would do a reboot of the force.
  Finally, I am in safe mode (with SHIFT-restart the login screen) and was able to fix it and remove the driver.

  Then I installed the utility of fingerprinting, this week still downloaded from Toshiba for my machine.
  He even marked as "new".
  That actually worked, in a way, but it caused my login icons user on-screen connection prior to appear as duplicates.

  Took me forever to understand it is the utility of fingerprinting and when I removed the user icons are returned to normal.

  So now the fingerprint reader is useless for me.
  In the hope of a solution soon.

  > So now the fingerprint reader is useless for me.
  > In the hope of a solution soon

  Have a look here:
  * Windows 8 Upgrade - Notes and Restrictions *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

  Software reader Toshiba fingerprint + _ + _

  _Issue description: _
  Toshiba Fingerprint Software is not supported under Windows 8. Fingerprint records will be lost during the upgrade process.

  * Note: *.
  + Remember your Windows password. You will need to enter after the upgrade. If you have a fingerprint reader, fingerprint records will be lost during the upgrade process, which is connected to the Windows 8 will not be via a fingerprint authentication more. +

• Portege R830 - 10 L BSOD during shutdown, reboot, go to sleep and crashed

  My Portege started to plant stopped two days ago. I tried the following:
  -Check that McAfee was updated ok, I tried spybot and superantivirus, couldn't find any threat
  -Check disk ok
  -Follow-up of all Toshiba TEMPRO messages to update the drivers
  -Back to a point of recovery a week ago ok

  Everything works fine, I can use all my programs and Hibernate works well so that... the system wants to close

  Closing the window will not disappear
  The laptop heats up, the fan increases speed and finally the crash with blue screen
  The TI restarts and the cycle starts again

  The only way to stop this process is to keep the power switch for a few seconds

  I ran out of ideas how to solve this problem, suggestions are welcome

  Obviously something blocks regular stops.

  Last step to solve this problem is installation of recovery image. After dong that you will own preinstalled OS and everything will be OK again.

  By the way: until you stop your portable computer check what background processes are active and try to put an end to some of them manually, just to see if the stop is blocked by some of them. If you will be able to know what is the problem here, you can delete some applications or disable any service that may be responsible for this.

  Play a little with it.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!