Porting applications to Mac

Similar Questions

• I can't download the application for mac windows phone. The message: you are interested in the content is now available in the store. How can I synchronize microsoft limia and macbook?

  I can't download the application for mac windows phone. The message: you are interested in the content is now available in the store. How can I synchronize microsoft limia and macbook?

  Contact Ms and ask them.  Only they dictate where their application is made available.

• creating applications for mac os to windows

  Sorry for the naïve question, but is be possible to generate a stand alone application for Mac OS from code written in windows?

  To make a standalone Mac application, you will need to compile it on the MAC of Labview version.  You should also make sure that you have not used the calls of platform dependent for example Active X written record...  I have another solution would be to run your windows on a virtual machine running windows on a MAC (I did recently with no additional work.

• enable the USB ports from a Mac to a virtual machine view

  I use a Mac with os x 10.6.8 and spin the view client 4.5. When I connect to my computer via RDP virtual, I noticed that my USB ports are not flowing on to my VM correctly. I have test it with a USB key. See my Mac well USB key, but it is not viewable in my VM. I checked the settings of pool and they are configured to allow the USB transfer. Is there something else I may be missing?

  Thank you

  Devin

  I found that a certain time at the time where I was doing a similar search.    Try and see if it works for you.

  1. Open the Applications folder on your Mac (or anywhere where you installed the VMware View Client).
  2. Click right (or Ctrl-click) on the VMware View Client app and select to view the contents of the Package on the shortcut menu.
  3. Finder will now show you the content of the application. In this new window open the content of the folder, and then open the resources folder.
  4. In the folder resources , you will see a file named vmware - view.rdp. This is the model that the View Client uses to generate new RDP connections. By changing this file, you can change the behavior of the RDP sessions that creates the view.
  5. Open the file vmware - view.rdp in a text editor and change the entry for DriveRedirectionMode, changing its value between 0 and 1.
  6. Save the changes, you will be probably prompted for authentication of your Mac (because you modify the content of an application in the Applications folder).

  The next time you start the client VMware View on your Mac, your local hard drives will be available inside VMware View. You will see a security warning to each connection on your Mac drive for potential users of Windows sharing. Also note that any connected USB drives need to be connected to your Mac before launching VMware View for them to be visible.

• sharing applications between mac and ipad pro

  When I double click on my iPad Pro, I saw a grey bar at the bottom which had Safari - of "of Howard Brazee computer.   When I opened it, Safari came with a web page, that I looked earlier today on Chrome.    I went to my Mac and saw that a Chrome icon left of the Doc, in the image of an iPad on it.  My cursor on it, I see that it says "Google Chrome - for iPad".

  I closed the app on my iPad Pro and started Safari on my Mac.  Then I repeated the double click and selected the iPad Pro.   It opened Safari with the previous tab and with this tab here (I'm in Chrome).    I tried to open some other applications forward on my Mac.   If it comes to mail, my iPad is going to open a mail but not find anything (I don't get mail on my iDevices).   I tried Photos and TextEdit and iBooks, but they did not speak with each other (and Safari appear on my iPad gray bar until I moved the focus to Chrome).   So I googled to find out how it works without success.   Is there a tutorial somewhere that explains what is happening here?

  What year and model Mac do you have?

  Depending on the year and model Mac you own if she runs the current iOS and OS X systems, you can see the features of continuity of OS X and iOS.

  http://www.Apple.com/OSX/continuity/

• Problem of interaction port USB3 Mini Mac

  Mac Mini 2012. Wireless mouse connected to USB 4 port. If I plug a USB3 HDD (in a station host USb3 or enclosure) in port 3, next to the mouse, wireless mouse freezes.  If I replace a wired mouse on the same port, its OK. If I move the mouse wireless ports USB 1 or 2, its OK.   The HD USB dock that I use are self powered so it's not a current max USB issue.

  Same scenario if I try ports 1 and 2. It looks like the 4 ports are not independent, 1/2, 3/4 are shared. But I don't understand why it does not work in all cases.

  If you have a powered usb hub, you can test the thesis that it is current that seems somewhat likely

• Why do I get memory for applications on Mac OS10.6.8 with Firefox 7.0.1 of start?

  Use Firefox 7.0.1 on a MacBook Pro with OS 10.6.8 and NO OTHER applications running, I always get the message that your Mac OS X startup disk has no mor for the application memory space. It occurs whenever I try to do something using Firefox or use any application now. I deleted six applications in the app, and that made no difference. I see a note on the iPhoto plugin 6. I have iPhoto app 9.

  Hi RJBP.

  Here is a Support article on how to troubleshoot Firefox with high memory usage:

  Firefox using too much memory (RAM) - how to fix

  Hope that helps.

• How can I create an 'empty' icon in iOS 9 which may contain several applications - such as the icon of "Extras" already existing in the iOS? That is to say something similar in the folder "Applications" in Mac OS?

  Apologies in advance if this is a really stupid newbie question - I use Mac and Mac OS since 1985, but only got my first iPhone with iOS a few weeks ago so I'm still very few familiar with the iOS interface and its operation compared to Mac OS. So here's my question:

  On my iPhone 5 c running iOS 9.0.2, there is an icon on the homescreen called 'Extras' which itself is not an application but rather that essentially works like an "empty folder" (according to the old metaphor of Mac OS) where you can 'drop' several apps. When I then click on the 'Extras' icon, a window opens showing me all the applications that are contained in this file/icon "Extras."

  I really like how it works, because it simplifies "clutter of the icon" on my iPhone. But I'm frustrated that there seems to be an 'Extras' icon, and I can't find a way to create a new extra. Better yet, it would be great to be able to create several icons "empty folder" then I could rename each to my taste, each containing themes of all pooled applications (e.g. ' Radio/Music apps', ' drawing/art apps,' "maps/hiking apps," etc.).

  So: Is there a way to create additional "icons" that work similarly to the 'Extras' in iOS icon 9? Thank you.

  To create a new folder, press and hold icon til it wiggles, drag it to a different icon, a folder will be created automatically.

  You can rename the folder.

  Press the Home button again when you are finished.

  Note: The folder will disappear if drag you applications.

  You cannot create an empty folder.

• hidden data port 2 on Mac Pro 1.1

  No one knows what that Apple engineers have reason had to have these two ports on the motherboard? Discussions I read suggested that they were for the installation of additional optical drives, but I just watched a youtube video that has already shown the optical drive port has additional sata cables already in there.

  2 are there thing, data ports, but I don't see a pair of extra power cables. It has been designed a bit more from the Commission? Or was there a plan that Apple abandoned.

  Wiring in optical bays in Mac Pro 1.1 to 3.1 2008 model have ATA/IDE wiring in optical bays, connectors from molex power 4pin.

  In my view, Apple has included these two additional SATA ports to guard against optical disk ATA/IDE, becoming too expensive or outdated form. Additional ports gave them the data connection to allow them to switch to SATA optical drives (with duplicator of molex power 4pin or adapter) without revision of the motherboard.

  There is no explanation of how to use them in any official literature from Apple. They are too close, and using both requires using at least a right angle connector. Practical power is expected, because they were never for your convenience. Research of power for additional disks attached here is your problem. (learn about amateur sites)

  For the great re-design for the 2009 model, these ports were eliminated, and the optical bays got SATA wiring (including power SATA).

• How can I change the Apple ID for updating applications on Mac?

  So I got this Mac at the time, but now my mother to use it now. She got a user of his and my user is sitting here, I use it frequently.
  The problem is each time an update is needed, the computer asks my Apple ID and not my mother. How can I do so that she can use his Apple ID to update the applications (and possible updates OS as well)? I mean by "applications" pre-installed software Apple, like Safari and whatnot.

  You can not. If you need this Mac to be registered with your mother, you will need to erase the HARD drive and start over. You will need to put in place using his Apple ID. And then, she will need to buy a software it wants from the Mac App Store with its own Apple ID.

  Contents of OS X and Mac App Store can only update the Apple ID bought.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.1; Apple Watch, 38 mm AL, Watch OS 2.0.1 silver; iPad 2 & iPhone 6 + iOS 9.1 air

• Can LabVIEW control a device series (RS232) via a USB port on a Mac?

  Using LabVIEW 6 and operation of G4 Mac OS 9, it was once possible to use a USB port for control and acquisition of data of a pH meter in our laboratory. Only, we used "Serial Port Init.vi" and wired to port #0, which referred to the USB port. We connected the connector DB9 to the pH meter to the Mac's USB port via a USB-to-DB9 adapter. LabVIEW 6 could then send commands to the pH meter and acquire pH values of him using the serial port, reading and writing icons. I try to do the same thing now using LabVIEW 8.6 on a Mac Pro OS 10.5.6 and leads nowhere. The simplicity of LabVIEW 6 is long gone, and it seems to be necessary to use VISA icons. When I write the vi using the icons series VISA, three potential serial ports appear to be available. However, the vi gives an error message, except when I choose a specific of these, ASRL2::INSTR, under the name of the resource, in which case the vi runs, but there is no communication with the pH meter. I can't understand what physical connector on the chassis Mac corresponds to ASRL2::INSTR, but it is does not seem to be the USB key. I tried to write the vi using the icons of VISA USB of LabVIEW, but which requires knowledge of USB communication protocols which is beyond the expertise of this chemist. So, I'm almost at a loss what to try next. I could buy a serial RS232 card to install in a PCI Express slot in the Mac, hoping that he will be recognized and can be resolved by using the icons series VISA. However, as it was once trivial to perform this task of communication via the Mac's USB port, it seems that it should not be necessary to buy another card. LabVIEW continues to become more and more complicated, and if she doesn't get any more improved, it may not work at all. I've been programming LabVIEW on Mac for almost ten years and she became gradually more frustrating. In any case, is - anyone out there fought USB / communication series battle on a new Mac and won? If now it is impossible, no matter which allowed to pass through a RS232 serial installed in a Mac Pro card? Any help will be appreciated. Thank you.

  Ken1,

  I don't have a chance to see the USB-serial last night.  I'll make a note to try it again tonight.

  Dennis is right.  You need to focus on the determination of what works or not in communications.  Look at the system information (Apple menu > about this Mac > more info...).  Then select the USB item in the list of the contents of the left column.  See if USB devices to look like they could be serial port emulators.  I don't remember exactly what they are called.  If the device doesn't appear like USB Raw, it probably means that no driver has been installed.  You can unplug the unit and see what are the changes.  This will tell you if the operating system sees the device.

  Lynn

• Porting applications to windows mobile 7

  Hi, I want to know the porting issues encountered when transfer you applications java blackberry to windows mobile 7 security on every platform.  Please help me.  Thxs

  Hello

  what you ask is not that simple if you don't say exactly what you want at the port.

  My advice is to make a list with your features in the BlackBerry application and use the MSDN forum (Forum MSDN Windows Phone 7) to read everything you can get in the windows phone 7 operating system platform.

• application on mac error

  
  Implementation error when I try to install Adobe. its stops at 29%. Application of Safari is stopped, I restarted the computer. I have a Mac. Ive went into public services and that has not worked. Any suggestions?

  Hi veronican64688858,

  Please let us know the application Adobe and its version of the dowry that you are trying to install.

  Also share the dowry of OS version you are using.

  Kind regards

  Meenakshi

• Installation of applications on mac

  Hello, I have the cloud creative adobe for mac and when I do the installation of an application, as an Illustrator, he executes the download then asked me to buy the program.
  How to install permanent programs? This isn't leave as a version 30 days.
  
  

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• Range of ports Application Tuxedo

  Hi all

  Is it possible to restrict the tuxedo application to use a specified range of ports while it is & running (except JSL, WSL, GWTDOMAIN)?

  Question - the tux request arrives with random ports assigned to the application connection to the DB servers, who sometimes is of WSL, JSL, NWADDR of another application of Tuxedo who was expected to come later on the same box.

  I am looking for a way to limit the first application of tux to come within the port range specified for servers. So they do not overlap with other Tux (WSL, JSL, NWADDR).

  Thanks in advance.

  
  

  Hello

  You can avoid this problem by ensuring that the ports used by the different Tuxedo system servers (WSL, ISL, GWTDOMAIN, BRIDGE, etc.) out of the range of ephemeral ports for your operating system.  This will ensure the connection of client as in the database that use (ephemeral ports) ports of the source never comes into conflict with one of your server's ports.  In the above example, 12249 and 12251 ports are ephemeral ports, i.e., dynamically allocated ports by the operating system specifically for the initiated client connections source port.

  See this section to determine how to change the range of ephemeral ports for your operating system if you need to do.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo