Portlets global services control

Similar Questions

• Phone call Platnum Global Services

  Received several phone calls from Platnum Global services. I refused to allow any "service" to my PC

  until I got a phone number vfrom call - back.  The number was not a toll-free number.

  Provided the number was321 200-0107 and said to be in California, to find errors sent to

  Windows. The Web site, they said that correct is... link... note indicative of North Carolina...

  http://platinumglobalservices.com/

  Hello

  "to find errors sent to Windows.

  There are NO errors sent to anyone.

  It's a scam.

  It is general guidance for this type of "cold" calls.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  See you soon.

  .

  p.s. Great these crooks use other people legitimate Web site URL into their scam.

• Event ID 7024 Manager Service control on cold start

  When I do a cold start I get event Service Control Manager 7024 and the system restarts several times until it's OK.

  However a warm reboot is successful immediately. Is there something wrong with my hardware?

  Hello Mike,.

  Refer to the procedure described in KB314094.

  http://support.Microsoft.com/kb/314094/en-us

  Also look at:

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  http://support.Microsoft.com/kb/307545

  Perform a repair to start the computer.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxprepair1.htm

• Error service Control Manager Event Id 7026

  Service Control Manager error - the next time you start Event Id 7026 or starting system (s) failed to load: __Lbd (I see this error message in the system event viewer when connecting). The full message of MS is below.

  Details

  Product: Windows Operating System

  ID: 7026

  Source: Service Control Manager

  Version: 5.2

  Symbolic name: EVENT_BOOT_SYSTEM_DRIVERS_FAILED

  Message: The next (s) starting or starting system could not load: %1

      

  Explanation

  The specified drivers not been loaded properly. The driver is not in the expected location.

       

  User action

  Do all the following:

  Verify that the drivers are properly configured.

  Check that the computer is running the latest version of the drivers.

  Unfortunately MS did not say how to do this, just to make - not all that useful. How can I solve this exactly?  Any help will be greatly appreciated.

  Hi Bantam,

  In Event Viewer, do you think the list of specific drivers as well as the error message?

  You can follow this link to update the drivers on your computer:

  How to manage devices in Windows XP?

  Hope the helps of information.

• Lack of Service Control Manager executable (WinService.exe)

  I get the following error during startup by the Service Control Manager:

  ********************

  Windows could not start the SCM_Service service on the Local computer.

  Error 2: The system cannot find the specified file.

  ********************

  After checking the properties I realized that the real WinService.exe is missing. It should be in C:\Windows\SysWOW64\ directory but is not there. I searched the entire subdirectory of Windows, but there is nothing there.

  ********************

  Properties of SCM_Service

  Path to the executable file:

  C:\Windows\SysWOW64\WinService.exe

  ********************

  Could someone give me an idea how to restore this file please?

  If you cannot run the SFC, then you probably have more system files missing or corrupt than just WinService.exe - but we can't really say without CFS.  I fear that some type of resettlement is eventually inevitable.

  If your hard drive is showing corrupt sectors, we should make a complete diagnosis to ensure that it went wrong (or is about to go wrong).  To test your hard drive, check the manufacturer and then get the diagnostic utility of: http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html.  If she failed the test, replace it.  If she passes the test, then it's probably nothing wrong with it.

  Remember to do this last system repair/upgrade procedure, you need an Installation of Windows Vista genuine disc.  A manufacturer's recovery disk will not work (it only allow you to do a clean install, which is not to preserve your settings or your programs if you can first backup and preserve your data).  That's what we have to do if you can't get your hands on a genuine disc, but it is best if you don't have that you can borrow a disk from someone somehow.  I don't know that the warranty includes replacement of an Installation of Windows Vista genuine disc if you have been issued one in the first place (unless maybe you can prove yours is defective).

  Going back to September for a restoration of the system is probably a little too - especially since we are not some that will actually solve the problem (although he often works in this case - but I don't know that I would do so far back me).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Calls of "Service Control Manager".

  Hi, I keep on receiving phone calls from people who say they are of Service Control Manager telling me that my computer's security is compromised. They are making great efforts to convince me that they are genuine, and they know my name, address (and, of course, phone number).  One this morning kept me on the phone for ages and asked to be connected to my computer to solve the problem, although she said that she would not be when I refused the white point.  When I asked a letter mailed to explain the problem, she offers, but which now grew to the point that my ID would be cancelled by Microsoft if I don't have something on the issue.  It even reminded me when I lost patience with her and hung up.

  Are these called authentic and I have a problem with my computer, or are they hoax calls?

  Hi Cathy,.

  NO, such calls are NOT authentic!  It's a scam.

  Neither Microsoft nor their partners to make unsolicited calls.

  You can read these links:

  http://blog.Malwarebytes.org/tech-support-scams/

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  http://www.howtogeek.com/180514/the-%E2%80%9Ctech-support%E2%80%9D-scammers-called-Htg-so-we-had-fun-with-them/

  See you soon

  Julia

• Service Control Manager 'Mistakes' 7001 & 7023

  Separated from this thread.

  All of the above Services are set to automatic and started, but the problem persists. In the event viewer, I get the Service Control Manager 'Mistakes' 7001 & 7023 and cannot identify what is the cause. I have turned off Homegroup and reactivated it hoping that it was the culprit, but nothing helps. My biggest problem is to track down what exactly is the cause for me the answers in EV are vague. I've done clean boots run SFC/scannow nothing helps. I also do not show NetBIOS TCP or whatever it is in the plug-and-play hidden devices in Device Manager. I have Win7x64 Hm Prem on an HP pc custom.

  Jerry Merci for your reply. Fortunately I managed to solve this problem via another site of microsoft to a position that was several years thanks "RiverWay May4th 2013" (link) http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/function-discovery-resource-publication-0x80070005/3a149bbb-4ccd-4b2c-bd88-dd642a85575e?rtAction=1433718960031 as follows:

  He said: -.

  "I was able to move beyond this error by doing two things:

  (1) open a prompt with "run as administrator" command window and run the following:

  > net localgroup administrators localservice / add

  > net localgroup administrators service / add

  (2) delete all files in the C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking folder. Some files wouldn't be deleted because they are used. I've just left alone.

  I'm not sure if step 2) was really necessary. In any case, after that, I was able to start the service Function Discovery Resource Publication . I changed the start mode of the service to "Automatic (delayed)" as others suggested.

  Hope that helps ".

  It cleared up my event viewer errors, seems when I started tinkering with homegroup settings in SCM began pestilential havoc on other parameters and which started when I googled everywhere to try to find out why when I restart my desktop computer so slow to produce icons they start white and then slowly come back to life or generate slow down my pc. Leading also to run sfc/scannow which found corrupt files but was unable to solve some of them which led to SFCFix which sets and sfc/scannow which forced me to look at in the first place of event viewer. In any case its all good now.

• I get 'service control manager configuration tool' popping up when I start my laptop.

  For the last month or two, I get a message that the 'service control manager configuration tool' wonder if I want to allow this program to access my hard Bank of Windows etc.  What is this & how can I get rid of him?
  Lenovo N580
  Win 8
  Thank you

  I have this for over a week but have now resolved, for me at least.

  Click on the details and see what SC. EXE tries to run.

  Mine was SC. EXE 'start SbieSvc' which is Sandboxie.

  Update this solves the problem.

  Hope this information helps.

• DIM-00014: could not open the Windows NT Service Control Manager.

  Hello
  11 g R2, on Win 2008 I created the user oracle of the United Nations. It is in ora_dba and local Administrators group but cannot create oracle instance:

  C:\Users\oracle>oradim -edit -sid TEST -startmode auto -srvcstart system
  DIM-00077: Failed to change service configuration.
  O/S-Error: (OS 5) Access is denied.
  
  C:\Users\oracle>oradim -new -sid TEST -startmode auto -srvcstart system
  DIM-00014: Cannot open the Windows NT Service Control Manager.
  O/S-Error: (OS 5) Access is denied.
  
  C:\Users\oracle>oradim -new -sid TEST -startmode auto
  DIM-00014: Cannot open the Windows NT Service Control Manager.
  O/S-Error: (OS 5) Access is denied.

  Thanks for the help.

  Start the command with administrator privileges prompt

• Failed to start Service Control Center?

  I have some problems with my service from departure control center after restarting the server? I use 11g R2
  
  During the execution of @ORACLE_HOME\owb\rtp\sql\start_service.sql - I get this message;
  
  Not available
  Dianostics:
  failed to start service using the reason of order "manual @ORACLE_HOME\owb\bin\win32\run_service.bat @ORACLE_HOME 2 OWBSYS LOCALHOST:1521:TARGITDW ' ORA-29532: Java call terminated by eception Java exception: java.io.IOExeption: output service start: Code = 0: err = the process cannot access the file because it is being used by another process.
  
  : out = please call [owbhome]/owb/rtp/sql/service.doctor.sql for more information.
  
  
  Medical service States:
  All PL/SQL packages and functions are valid
  Properties of the platform have been loaded properly
  Location of the platform were seeded correctly
  NLS messages have been loaded properly

  the platform service is not available

  Service script is available on the database server
  The connection information stored in the repository are correct
  
  
  I was able to start the service control centre earlier? What could be wrong?

  Hello
  you have several instances of database with the OWB repository on the server?

  Try changing the script of run_service.bat - remove the redirection of output to the file run_service.log at the end of the script ("' > % RTHOME%\owb\log\run_service.log" ")

  Kind regards
  Oleg

• Service Control Center

  Hello
  My installation works as follows. I have a laptop with the now installed Warehouse Builder. This means that on this laptop is my design center. On some servers, I have installed a repository. To deploy on one of them, I start the service control center for my laptop and do in the repository remote all I want to do. So far so good.
  But I also have tasks scheduled on these servers. This forum said that we should start the service control center on the server. But! Of course, the server has no code service. Does this mean that I have to install the generator of the warehouse as on the remote server where I want to run scheduled tasks? Or is it possible to install only service control center?
  
  Thank you
  
  S.

  Yes, you will need to install OWB on each of the servers you use as a run-time and start the service control center on each server. The Service control centre is part of the OWB installation and cannot be installed separately. He is responsible for the management of applications for a single run-time repository, and so if you have several repositories of runtime, you will need several runtime services.

  What you might try is install OWB on one server and then start multiple versions of the Control Service Center - one for each of your remotes. They should not conflict, and then you just do a single installation.

  NigelB.

• Warehouse Builder Installation - Service Control Center

  I am new to Oracle so please excuse me if I ask a stupid question. We have a database of the 'target' Oracle on a server that will be our database of ODS containing the repository of the warehouse. Based on this document http://download-uk.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/reqs01.htm#BGBIDBHJ installation, I would like to ' Builder with Client/Server application traditional warehouse "to realize and install only the 'Control Center Service' on the data warehouse database server.
  
  Can you please point me in the right direction to get the documentation or expose the basic steps?
  
  Install all components of storage/storage at all on the ODS database server?
  
  Thanks in advance

  Hello

  you need the owb on the client software to run on the client design center and you need software owb on the database server to run the service control center there.
  Using the wizard of repository installed on the server to create the repository automatically configures the database to run the control center service automatically. If you use the one installed on the client, you will need to provide the path to the software owb on the server during installation.

  In addition, there is one type of owb software that contains the client and server components.

  Good luck
  Carsten.

• Keep the previous data - Global Cluster control

  I needed to enter a lot of information at the beginning of my program labVIEW with the following structure:

  Commercial equipment

  Function generator

  Manufacturing

  Model #.

  Serial No.

  Calibration date

  Graphic recorder

  Manufacturing

  Model #.

  Serial No.

  Calibration date

  Digital Voltmeter

  ....

  Material test

  ...

  So I created a Subvi for this entry using a cluster of clusters of orders of the chain.  If something is wrong or that you close the program, you must enter all the information again.  I am trying to use a global variable to store my cluster.  When I run the program I would pull the global last data entries.

  How to read the global cluster of control without unbundling and grouping a mess?

  THX

  Look in the library GXML.  He must do exactly what you ask.

• After updating Windows, causing KB981957 XP BSOD, C000021a Service Control Manager error at startup in safe and normal mode.

  After you apply this update, the system starts more (secure or normal) and gives the BSOD error above.  Manual removal of the patch Recovery Console fix the BSOD using batch spuninst.txt in the patch folder.  The affected system is an AMD Athlon 2400 + with 2 GB of RAM and XP SP3.  All other updates installs successfully.  I scanned viruses with Avast, Dr Web CureIt, ComboFix, Malwarebytes and TDSSKiller.  The system seems to work fine without the update.

  It seems to be a problem with the Win32k.sys file in the patch, but I ran out of utilities to solve this problem.

  Hello

  The solution is to report the problem, so the update can be set to not to do so. Microsoft
  may already be a fix, or work on it, or it could be a new problem. He
  There's even a phone number to make it easier.

  Certainly keep good backups that there could be an underlying hard disk or hardware
  issue.

  ========================================================

  Here is the solution for the coooo21A except use it when you can just get the fixed update
  is not the method I want to use.

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the WindowsAdvanced Options menu that results, select thelast known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• UCS Central - model of political profile of Global Service with Local SAN Boot

  Hello

  I created a profile Service Global UCS central template to create the ESX Service profile for servers 5 different area of UCS.

  The majority of addresses is assigned in the world i.e. addresses MAC, UUID, etc with the exception of the WWPN where local teams of SAN want to pre-configure the zoning for a defined block of addresses WWPN.

  I intend to use the ID range Qualification policy to assign a block of addresses WWPN to a specific area of UCS, but my main concern is around the creation of Boot SAN policy. As we intend to use the same model of Service Global profile for 5 different areas SAN Boot targets will have to be different.

  Any way to locate startup SAN strategy so I can have only one UCS Global local SAN Boot targets?

  Thank you very much, Paul

  Hi Paul,.

  What you're looking for, it's what we call a 'Boot target Alias', that should work much in the same way that VLAN alias work with UCS 1.1 Central.     Made senior level policy reference to the 'alias', but the actual link (some VLAN or target of Boot or...) will be specific field/DomainGroup and will not be resolved until the SP is associated with a session on a given field.     In the case of prime targets, this would allow for the same Global SP model to be used in several DomainGroups, while the actual target of Boot will vary according to the individual DomainGroup.

  Unfortunately, this feature is not in UCS 1.1 Central.   We have it on the list of features 'high priority' to point 1.2.

  The only 'solution' is to use several global models of the SP, whose name and attributes reflect the underlying objective of SAN-Boot - even if this creates models of N * M (N = # Gech/s;) M = bays of Boot # SAN).

  Hope this helps to enlighten us.    See you soon,.

  -Jeff