Warehouse Builder Installation - Service Control Center
I am new to Oracle so please excuse me if I ask a stupid question. We have a database of the 'target' Oracle on a server that will be our database of ODS containing the repository of the warehouse. Based on this document http://download-uk.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/reqs01.htm#BGBIDBHJ installation, I would like to ' Builder with Client/Server application traditional warehouse "to realize and install only the 'Control Center Service' on the data warehouse database server.Can you please point me in the right direction to get the documentation or expose the basic steps?
Install all components of storage/storage at all on the ODS database server?
Thanks in advance
Hello
you need the owb on the client software to run on the client design center and you need software owb on the database server to run the service control center there.
Using the wizard of repository installed on the server to create the repository automatically configures the database to run the control center service automatically. If you use the one installed on the client, you will need to provide the path to the software owb on the server during installation.
In addition, there is one type of owb software that contains the client and server components.
Good luck
Carsten.
Tags: Business Intelligence
Similar Questions
-
Hello
My installation works as follows. I have a laptop with the now installed Warehouse Builder. This means that on this laptop is my design center. On some servers, I have installed a repository. To deploy on one of them, I start the service control center for my laptop and do in the repository remote all I want to do. So far so good.
But I also have tasks scheduled on these servers. This forum said that we should start the service control center on the server. But! Of course, the server has no code service. Does this mean that I have to install the generator of the warehouse as on the remote server where I want to run scheduled tasks? Or is it possible to install only service control center?
Thank you
S.Yes, you will need to install OWB on each of the servers you use as a run-time and start the service control center on each server. The Service control centre is part of the OWB installation and cannot be installed separately. He is responsible for the management of applications for a single run-time repository, and so if you have several repositories of runtime, you will need several runtime services.
What you might try is install OWB on one server and then start multiple versions of the Control Service Center - one for each of your remotes. They should not conflict, and then you just do a single installation.
NigelB.
-
Failed to start Service Control Center?
I have some problems with my service from departure control center after restarting the server? I use 11g R2
During the execution of @ORACLE_HOME\owb\rtp\sql\start_service.sql - I get this message;
Not available
Dianostics:
failed to start service using the reason of order "manual @ORACLE_HOME\owb\bin\win32\run_service.bat @ORACLE_HOME 2 OWBSYS LOCALHOST:1521:TARGITDW ' ORA-29532: Java call terminated by eception Java exception: java.io.IOExeption: output service start: Code = 0: err = the process cannot access the file because it is being used by another process.
: out = please call [owbhome]/owb/rtp/sql/service.doctor.sql for more information.
Medical service States:
All PL/SQL packages and functions are valid
Properties of the platform have been loaded properly
Location of the platform were seeded correctly
NLS messages have been loaded properly
Service script is available on the database serverthe platform service is not available
The connection information stored in the repository are correct
I was able to start the service control centre earlier? What could be wrong?Hello
you have several instances of database with the OWB repository on the server?Try changing the script of run_service.bat - remove the redirection of output to the file run_service.log at the end of the script ("' > % RTHOME%\owb\log\run_service.log" ")
Kind regards
Oleg -
ATI Catalyst Control Center simplified view do not support active graphic processor
When I start the CCC, I get "features in the ATI Catalyst Control Center basic view do not support active graphic processor".
I'm using ATI (not Intel).
Driver is showing only: Version 8.633.0.0
ATI Mobility FireGL V5700pci\ven_1002 & dev_9591 & subsys_212717aa
System BIOS: 3.11 (2009-11-19)
W500 4058-CTO on WinXP
Uninstall-reinstall CCC and or the driver does not help. How can I fix CCC?
Thank you
Rick
Now corrected to my laptop an error of ATI Catalyst Control Center.
I had given up the uninstall/reinstall and register pluck and sweep, so I ran Intel graphics all the time.
I voted against reinstall .NET 3.5, 3.0, 2.0... as I didn't aggravate and lose even more time, since I have a working machine.
The other day the matrix Driver Lenovo had a video update.
V8.712 - 100302 b - 097094C
Applying this version fixes my ATI Catalyst Control Center.
If this will help someone in the future, here's my ATI Catalyst install Manager report Journal of Installation:
Hardware information
Name ATI Radeon Graphics Processor
Manufacturer ATI Technologies Inc.
Device ID 0 x 9591
Vendor ID 0 x 1002
Code of the class 0 x 030000
Revision ID 0x00
ID subsystem 0 x 2127
Subsystem vendor ID 0x17aaExisting packages
Packages for installation
Catalyst Control Center
Final status: success
Version of the article: 2010.0302.2233.40412
Size: 150 MBATI Catalyst Install Manager
Final status: success
Version of the article: 3.0.765.0
Size: 20 MBATI Display Driver
Final status: success
Version of the article: 8.712.0.0000
Size: 40 MBMicrosoft .NET Framework Version 2.0
Final status: success
Version of the item: 2.0.50727.42
Size: 22 MBMicrosoft Visual C++ 2008 SP1 Redistributable
Final status: success
Version of article: 9.0.30729.4148
Size: 6 MBNow, that brings me to the initial problem of refresh of the external monitor around rate not exceeding is not 60 Hz. (subject for another thread)...
-
Gurus,
I have 2 questions about OWB (11 GR 1 material) Conrol Center.
1 control center does not start occasionally, after I login and out Desgin Center some time later the control centre begins.
Any thoughts on the issue.
2. How can I check if the Control Center Services are running on the client side.
Greatly appreciate your thoughts on these issues.
Thanks in advance!
Published by: user524448 on August 20, 2012 14:09>
>
1 control center does not start occasionally, after I login and exit the Desgin Center some time later the > Control Center starts.
Maybe your hosting control centor DB began.
>
2. How can I check if the Control Center Services are running on the client side.
There is a script available in OWB_HOME\rtp\sql\show_service.sql run this script to see if your center of control service is running or not.
If the script says 'Available', it means control center service is running
If the script says 'Not available', this means service control center does not workThere is little more script available in one place.
Use start_service.sql to start the service control Centre
Use stop_service.sql to stop the service of control center
Use service_doctor.sql to study the problem at the service of control centerThank you
Fati -
Problem with the Installation of Warehouse Builder repository
I try to install OWB 11.2 on a database of newly installed 11.2 on a German Windows 7 x 64 machine. When I start the Repository Wizard I get a 40% increase and the line 'Element SeedData.XML 99% use' Message: Die Eigentumerinstallation of the Warehouse Builder - Workspace EIB Benutzer OWBSYS nicht been ausgeführt wurde. INS0017: Installation der Seed-Daten nicht been. INS0029: Fehler bei der Installtion. The last lines of the log file are:
principal. TaskScheduler timer[5]20100928@16:05:41.041: 00 > oracle.wh.repos.pdl.mcm.MCMUtils.executeStoredProcedure(MCMUtils.java:59): {call SnapshotTrigger.syncAssociationTables}
principal. TaskScheduler timer[5]20100928@16:05:41.041: 00 > oracle.wh.repos.pdl.mcm.MCMUtils.executeQuery(MCMUtils.java:130): WVW: point sp registration
principal. TaskScheduler timer[5]20100928@16:05:59.059: 00 > oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:2110): Throwable = INS0017: Installation der Seed-Daten nicht been.
principal. TaskScheduler timer[5]20100928@16:05:59.059: 00 > oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:1476): [executeOwbReposOrRuntime]: error occurred during the sowing OWBSYS. = Java.lang.Exception exception: INS0017: Installation der Seed-Daten nicht been.
principal. AWT-EventQueue-0[6]20100928@16:06:00.000: 00 > oracle.wh.ui.jcommon.WhButton@26cd2192: WhButton setLabel rtsString = OK
principal. AWT-EventQueue-0[6]20100928@16:06:06.006: 00 > oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:1476): open before "UnSuccessDialog".
principal. AWT-EventQueue-0[6]20100928@16:06:06.006: 00 > oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:1476): open the UnSuccessDialog...
principal. AWT-EventQueue-0[6]20100928@16:06:06.006: 00 > oracle.wh.ui.jcommon.WhButton@26cd2192: WhButton setLabel rtsString = OK
Before I run the Repository Wizard, I started the scripts:
@C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\clean_owbsys.sql
@C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\cat_owb.sql TS_OWB_REPO
@C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\reset_owbcc_home.sql C:\Oracle\product\11.2.0\dbhome_1
alter user identified by password owbsys account unlock;
change owbsys_audit user identified by password unlock account;
I also tried installing from another machine and also started the script
@C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\remote_owb_install.sql C:\Oracle\product\11.2.0\dbhome_1\
but the result is the same.
Where is my mistake?I found my mistake. The space was too small :-(
He had only 20 MB instead of 200 MB I wanted to give him. Somewhat strange. After I increased the tablespace to 200 MB, I got the following message in the Repository Wizard.INS0005: Tablespace TS_OWB_REPO hat nicht der freien free zum Installieren der owb_repository_owner? -Objects. ES are 0 bytes space available freier. Es sind 262144 bytes required. Raise Sie die Grosse of the Tablespace, wahlen you are a different Tablespace aus oder.
even if the tablespace was totally empty. After I put the tablespace to "autoextend on ' the repository Builder completed without errors even if it used only about 150 MB to 200MB.
-
Hello
I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
I bought Need for Speed Carbon and installed on my laptop.When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
He said that the driver is installed and system must be rebooted.Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
How can I solve this problem?Sorry for the long letter,
Thanks for the help.Hello
As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
You can try to use the omega site ot driver drivers Toshiba orginal...@aportakal
Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory. -
HP program installation doesn't install Catalyst Control Center.
Hello.
I have a HP g6 - 2324TX with a 4 DDR3 8 DDR3 Windows 8 upgrade
Catalyst Control Center had recently stoped working, and my computer was basically killed himself, so I used the restore option in the options to start making a new installation of windows. It would have been perfect for my same situaution but it has not installed the Catalyst Control Center. Now, I'm pretty experienced with PC and know my way around them well... But it got me in trouble.
To solve my problem, I tried the following.
-Download the AMD drivers from their site, but it does not work on the number that it needs drivers HP. The CCC has not just run.
-Download HP drivers on their website, the instalation was good up until when I rebooted it was not installed from CCC.
-J' tried to install the HP drivers and then installing the CCC to AMD, but it still doesn't work.
-J' tried looking for a solution on the internet, such as... Make sure that my C:\User folder is not hidden.
I would also like to note that the relocation with a startup disk is not an option.
That's all that I remember of trying, I'm a gamer so Switchable graphics is Important.
Wish a quick response.
Specifacations:
-Windows 8 x 64
-Intel (R) Core i5-3230 CPU 2.60 Ghz Duel Core
-8.00 GB of Ram DDR3 (7.89 usable)
-Intel(r) HD Graphics 4000
-Radeon (TM) HD 7670M
-500 GB hard drive
ManticTalbot wrote:
Hello.
I have a HP g6 - 2324TX with a 4 DDR3 8 DDR3 Windows 8 upgrade
Catalyst Control Center had recently stoped working, and my computer was basically killed himself, so I used the restore option in the options to start making a new installation of windows. It would have been perfect for my same situaution but it has not installed the Catalyst Control Center. Now, I'm pretty experienced with PC and know my way around them well... But it got me in trouble.
To solve my problem, I tried the following.
-Download the AMD drivers from their site, but it does not work on the number that it needs drivers HP. The CCC has not just run.
-Download HP drivers on their website, the instalation was good up until when I rebooted it was not installed from CCC.
-J' tried to install the HP drivers and then installing the CCC to AMD, but it still doesn't work.
-J' tried looking for a solution on the internet, such as... Make sure that my C:\User folder is not hidden.
I would also like to note that the relocation with a startup disk is not an option.
That's all that I remember of trying, I'm a gamer so Switchable graphics is Important.
Wish a quick response.
Specifacations:
-Windows 8 x 64
-Intel (R) Core i5-3230 CPU 2.60 Ghz Duel Core
-8.00 GB of Ram DDR3 (7.89 usable)
-Intel(r) HD Graphics 4000
-Radeon (TM) HD 7670M
-500 GB hard drive
Download the softpaq to download driver HP portal section AMD graphics driver web support for your laptop. Double-click the downloaded softpaq. It will install the driver AMD, Catalyst Control Center and driver Intel.
Do not install the Intel graphics driver separately. This will stop the switchable graphics feature can be used.
Do not install the graphics drivers Intel or AMD. The drivers from the manufacturer are not to conform to the switchable graphics feature. This is why they do not work. Install graphics HP drivers only if you want the feature to function.
-
Starts the Service of control center
Hi all,
I would like to know if it's possible and how to start this service automatically with a system of planned work.
The server is automatically restarted every week someone must start Control Center service manually by typing: user, pwd, server, port, and service.
Thanks in advance,
Victor.what you can do is to create a script that will be run once your server is restarted.
in the script, you must follow these stepsgo to the directory: $OWBHOME\owb\rtp\sql
connect to the repository with sqlplus owner
start the sql file start_service.sqlExample:
Microsoft Windows XP [Version 5.1.2600]
Copyright (C) 1985-2001 Microsoft Corp.C:\Documents and Settings\Nicolas > cd C:\OWBHOME10203\owb\rtp\sql
C:\OWBHOME10203\owb\rtp\sql>sqlplus repo_owner/password@orcl
SQL * more: release 10.2.0.3.0 - Production on Fri Mar 20 15:55:36 2009
Copyright (c) 1982, 2006, Oracle. All rights reserved.Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing optionsrepo_owner_10203@ORCL > @start_service
AvailablePL/SQL procedure successfully completed.
-
Catalyst Control Center: Host has stopped working
Whenever I start my old Toshiba laptop computer for 3 years, I get this message: host of Catalyst Control Center has stopped working and then nothing. I check the current update drivers says it all day, but I went on this site called Driver Whiz and he says I'm wrong 8 things with my computer Says: Standard AHCI 1.0 Serial ATA Controller... out of date... then 2 ATI HDMI Audio... updated... then system devices said ATI 1/0 5 MB... updated... communication processor and then disconnected devices : 4 JMB38X MS Host peripheral COntroller is disconnected, but they want 50 buck for them to fix it when I downloaded what I thought was that it was free so now it's on my computer... UGH!
My LT is a Toshiba Satellite A665D
OS: Windows 7 Home Premium 64 - bit (6.1, Build 7601) Service Pack 1
Processoer:AMD Phenom (tm) II P920Quad Core (4 CPUs) processor clocked at 1.6 GHz
BIOS: 19:13:52 VER: 08.00.0
Memory: 4096 MB Ram
DirectX 11
I am running Iolo System Mechanic 11 on my machine for detection of spyware, malware, viruses and been with them for 5 years and this has NEVER happened since I was with them. My Toshiba Service Station does not work and tried to contact Toshiba as well, but yet they want the money for technical advice. I know that somebody here is tech savey and I am disabled and do not have the money to repair this laptop so please can someone there give me info on how to get back to his old self of my machine? Oh and btw, I did a system restore, but this message from Catalyst Control Center is yet to come. PLEASE HELP ME AND THANK YOU VERY MUCH!
"I went on this site called Driver Whiz and he says I'm wrong 8 things with my computer.
Don't believe one thing, or say similar sites. They are only after your money.
To top it off they often install software that can be difficult to uninstall, and if
you don't uninstall it you get messages.
It seems that there are a lot of discussions about uninstalling the program driver Wiz, but I
guess the best place to start is to their own site-http://driverwhiz.com/support/uninstall
If that won't uninstall not indeed their software, then you may need to do more
read other threads."Microsoft downloaded as 13 updates when I turned off my computer.
I hope that you do not say that you stop the machine while the updates were
installation. If none simply let problem Windows updates check again and select only a little at a time and let it install, go to learn more. Avoid also the 'Optional '.
updates, particularly of driver updates.
In regard to it and the fake driver software installed. If you started having problems after that Windows updates don't you have a restore point from the system that dates back to before that you did? If so do the system restore and then move on the updates again. Restoration can even delete 'wiz pilot' with a bit of luck.Now - 'Catalyst Control Center host has stopped working"I suppose you were
get this error before the debacle "Pilot Wiz"?
I uninstall the drivers ATI and the CCC software via programs and features and then go to the download page of Toshiba for new drivers. It can be pilots became corrupt, but the "updater" does not know this. It checks only to a version of file.
Personally, I do not use updates of autopilots. Best to download the installer and install manually, if Toishiba have this option.With FB game, you will also want to put Flash Player to - day
Adobe - Adobe Flash Player Install
Shockwave-
Adobe - Adobe Shockwave Player.
-
The sound has of worked, then suddenly dropped after I had scanned with Spybot. When I go to the control center audio boxes are 'Grisées Out' has got his back with system restore plays a video clip, then there once again. No SIMPLE solution? Thank you.
I recommend reinstalling the drivers for your smart sound (or, better,.), installation of the drivers available later on the chip
Go to the top Dell support site (enter your Dell service tag number, to get the drivers for your machine) and download & run the installer for your audio device.
Or, open the Device Manager and find your sound device (it will be listed under sound, video and game controllers.) Hit to the top of the site of the manufacturer for their latest driver Installer. If you need help with this, thanks for posting that Device Manager indicates the sound card/chip is, we can help you find the drivers.
HTH,
Chris -
Brother Control Center 3 has stopped working under Windows 7 Pro
Recently trying to use my Brother Control Center 3, I get only a white white mask on the screen which used to hold the scanner controls. My computer is running Windows 7 Pro, Service Pack 1 with all current updates. I get to use my printer MFC - 240 c with no problems and the Suite Pro that came with is is v - 1.0.3.0. My Control Center version is 3.10.0.0. I tried to reinstall the Suite Pro by uninstalling the first there. When you try to run the CD, I got a message that the drivers have been updated, and I had to go to the website of Brother to perform the installation. After finishing, I always have the same white screen when you try to start the CC3. I checked all the settings several times and still can't understand why it has stopped working; any ideas? I planned to take the 10 free Windows upgrade, but now I do not know if this will solve this problem or cause more problems.
Thank you for pointing me in the right direction. I started a Chat Session with the support of brother and they gave me the following patch that worked very well. Good day.
[Jonathan] Here you are:
http://support.brother.com/g/b/faqend.aspx?c=CA&lang=en&prod=mfc9840cdw_all&faqid=faq00100228_000
-
BlackBerry Smartphones blackberry 9000 mds on server and the device (mds control center)
Hello
I have the following problem. We use the SDM Service on the server to push the software programmed on a few blackberrys (e.g. 8800). All Blackberrys are saved on the server in the list of mds.
The new Blackberry 9000 does not appear in the lists of mds. And after the activation of the SDM control center is not on the device. the control center of mds push automatically by group policies. but I can't found on the device. How can I make the blakcberry 9000 working with SDM on the Enterprise Server BES services?
We use the 4.1.4.15 version.
I'm sorry for my English. IM German.
Thank you.
!! UPDATE!
I had a contact with level 2 Support T-Mobile. They told me to download the latest firmware to the updatecenter of t-mobile (has not heard of so far), then install this software on a PC and install the MDS Runtime of this package to the devices.
After the url of the download location, where I found the firmware:
--> Download
--> Installation for PC
--> Start the Desktop Manager
--> Connect Blackberry "BOLD"
--> uninstall all the "fragments" of MDS duration of unit
--> restart the Blackberry device
--> Install MDS DURATION & MDS default Launcher (V 4.6.0.13)
--> Restart device
You're good...
The "BOLD" today BBlackberry is a device registered and within seconds all of our MDS applications when pushed to the device and work perfectly.
I hope this will help you too.
-
Message: Follow-up to Catalyst Control Center has stopped working
Why my computer keep telling me that followed by Catalyst Control Center has stopped working: search online for solutions?
Hello
Check with Support ATI, their drivers and documentation online and ask in their forums
for problems known. Update or reinstall the ATI drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx===============================================================
Other troubleshooting methods:
References to Vista also apply to Windows 7.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
connection to control center - default
Hello world
I have a problem with the connection to the control centre
When I click on the default control center > open editor > test the connection it shows the status of success
When click on default control center > validation is successful
But when I go to tools > Control Center Manager it throws me the following error message
RTC-5260: unable to connect to the command center. Check that you have provided correct host, user, and password, and the name service
RTC-5301: the control center is not currently available to the general public
When I cliekc on ok in the error message dialog box, it is invited to enter the user name and password. On the credentials of its new closure providing me for the same two error above
(2) for the generator of warehouse to oracle 10 g release 2 should I install workflow companinion CD separately or y at - it files embedded in OWB software, which can be accessed to install Windows Firewall.
Thank you very much
SriSee this post:
Maybe you are looking for
-
Sort by title wrong with iOS10 in iTunes
The view "all by title" is not correct in iOS10. The sorting is now by the artist. The bug occurs on 7 more iPhone and iPad 9.7 pro No problem with iTunes on Mac OS Sierra... all the co
-
By icons in my toolbar, I had links to several Web sites such as my e-mail address, bank accounts and several other Web sites...
-
y410p put Windows on another drive
I have this laptop nice and I picked up an SSD because it does not come with one. I am placing it in the Caddy. Is there a way to switch Windows 8 for the SSD? I can't use a download an ISO from Microsoft since the serial number is a license to the m
-
My Hotmail sends automatically emails that I did not authorize
Hello I don't know what's happening with my hotmail. Automathicly send an email to 10-15 people like Viagra addvetice or something like that. My friends always call to stop it. I can't. Maybe some virus? What should I do But I don't want to change my
-
Invalid CD key? Im trying to install windows xp on my old laptop from samsung before I sell, I have a copy genuine windows xp home edition (bought a few years ago), but when I get to the point to enter the product key, it says ' you entered the CD ke