Ports USB 3.0 HP Pavilion

Similar Questions

• Ports USB 3.0 on Pavilion hp8 - 1070t does not

  Just bought a HP Pavilion HPE h8xt (also called hp8 - 1070-t) with the player 15-in-1 memory card, 4-port USB 2.0 (front), audio, 2 USB (rear-facing top of page).  The upper part (rear panel) USB ports are USB 3.0.  They do not work.  Device Manager reports "this device does not work properly because Windows cannot load the required drivers for the device (Code 31)." These ports are detached from the motherboard (IPIS8-CH2).  The pilot is reported as < tihub3.sys=""> . HP support wants me to a full recovery, but it's a waste of work of three days that I am not willing to take as every other thing on the machine works.  People tell me that others have had this problem with this device.  Someone at - he found a solution?

  HP support has not been able to find me that the right chip drivers, which gives me sp4787.exe.

  Hello

  When you plug the USB 3.0 on a USB 2.0 device, you should see the following message is displayed:

  

  Now if you do not see this message then the USB 2.0 controller is probably not setup in device management to provide notification.

  You can also download PC Wizard (it's a gift) and it will give you more information about your USB 3.0 controller.

  

  So, how do you know if your USB 3.0 really works your expectations?

  Download HD Tune and the reference device when it is plugged into a USB 2.0 port and a USB 3.0 port. There should be a difference. You may or may not like the difference.

  I compared my USB 3.0 flash drive and it is 60% faster on the USB 3.0 port.

• Where are the Ports USB 3.0 of my HP Pavilion dv6-6158nr Notebook?

  I am unable to find the Ports of USB 3.0 on my HP Pavilion dv6-6158nr laptop.

  Please tell which side are these ports and how to get the maximum speed out of them?

  Hi Hanazir,

  You'll love this.

  Get a bright light and shine on the left side of the laptop.

  Now, get a magnifying glass and look carefully next to the USB ports.

  3.0 ports are marked with the logo 'SuperSpeed '. "SS".

  Similar to this, but very, very small!

  

  To get the maximum speed, use only with devices usb 3.0 - external hard drives, USB sticks, etc done to run with this technology.

  There is no harm in using the USB3 ports with usb devices 2.  In most cases, USB 2 devices work as expected when connected to a USB 3 port.  There are rare cases where the USB 2 device may not work when it is attached to a port USB 3.  Before you accuse the laptop / desktop or even the port and if your laptop don't not have a USB 2 port, then consider to plug a USB 3 hub that supports one or more USB 2 ports and try that.  A few specialized 2 USB devices require USB 2 connection - deal with it.

  Dragon tips

  USB 3 external drives: offset connection, more or less depending on your hub, your hardware and your player can add up to an unacceptable delay when you use a USB 3 hub in conjunction with port USB 3.  Huh?  Unless absolutely necessary, do not use a USB hub 3 with an external drive USB 3 - connect the USB 3 drive directly to your 3 USB port on the computer.

  Other usb devices 3 work well on the SIIG 7port USB 3.0 / 2.0 Hub - this is a very nice quality, IMO and is supported by its own power supply.  Nice.

  It's my pleasure to help.

  Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

  When the answer is a good fix or workaround, click accept as Solution !

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP Pavilion: Before port USB on HP desktop computer has stopped working

  My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device.  It says "USB device not recognized.  The last USB device you connected to this computer worked badly and Windows does not recognize. »

  I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.

  Hello

  The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.

  You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.

  You will probably need to go to HP for the part.

  You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.

  Jay

• Pavilion dv5 2048la: not working touchpad (keyboard/mouse) and port usb but turns on properly

  I started to clear some files in the main C: files then the touchpad did not find the (ordrivers of controllers) and I used a usb mouse. But now this does not work since the only time where that I turned off the computer and then when I turned it on it has stopped working also. Even if I have to do something more professional, I would like the answers. Also CD rom does not work a long time ago. Help, please

  Alex-Simball

  Hello;
  
  Let me welcome you on the HP forums!
  
  I hate to be the bearer of bad news, but you are in a really difficult situation that's going to be almost impossible to fix.

  First, there are the ways, if you have the Windows installation media, to repair missing system files - but you probably don't have that, and even if you did, your optical drive would have to work in order to be able to read the media.

  Second, you may want to restore your PC to its original state using HP recovery media, but there are two problems with this: (1) HP stores not more to your PC and your optical drive would need to work in order to use it (2) is a set of a DVD and a CD.

  To restore your PC to the operating status, you'll need to be able to start using Windows disc media.  One way that COULD work is if you use an external DVD/CD drive plugged into a port USB - but for this to work, your PC must be bootable (1) and (2) be able to boot from USB.  IF these two are not true, then you can not restore it - the way it is.

  Here are a few troubleshooting steps when your PC won't start - you can try them and see if everything works: computer won't start (Windows 7, Vista, XP) | HP® customer support

  Maybe something in this package of measures will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP pavilion slimline s5220y: the 6-in-1 card reader combo - headphone and microphone ports usb plug

  where can I buy a combo of 6-one - with ports usb memory card reader and headphone and microphone jack. I can't find any place that has always part

  Goodrock, welcome to the forum.

  Because the computer is almost 7 years old, I don't think that HP will have parts.  In my opinion, your best option is to buy an external card reader and card internal with USB ports.  Headphone and microphone sockets will be difficult to replace, or not at all.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• G4-11125dx: USB Driver issues HP Pavilion g4-1125dx Notebook PC model #: LW342UA

  Hello.  I have a:

  HP Pavilion g4-1125dx Notebook PC

  Model #: LW342UA

  When it has been upgraded to windows 10 I lost all USB functionality.  The Device Manager uses a driver, but it does not work properly.  "Standard Enhanced PCI to USB Host Controller" and "Standard OpenHCD USB Host Controller" have the yellow exclaimation points with the USB symbol next to them.  Under properties, it reads:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I try to roll back the driver nothing is available.  When I try to update, it says I already have the best driver.  I tried the windows update and Easy Driver software but no luck there.

  I confirmed that I do infact has power to make ports (USB fan :/) so I don't think that it is a hardware problem, especially since it worked before upgrade.)

  I know that its a laptop older, but I upgraded the CPU to a quad core Phenom II N970 and this 'thing' is running if good, I do not give up on it.  Ethernet and wireless are working properly and there is no other troubled hardware issue.

  Thanks in advance,

  Cory

  I tried to go back to windows 7, but I've been spending the period from 30.  The laptop is not the recovery disks, or a partition to do.  For the heck of it I advanced and reinstalled windows 10.  Now the USB ports work correctly so I guess it was something that happened during the initial upgrade?  Anyway thanks for your help!

• How many ports usb this laptop there

  I want to buy hp pavilion g6 2305tx.but the problem is that it has only 2 usb ports. But I contacted a dealer and he told me that there are 3 ports.is it true? Please give me is hands on the review.and safe to use usb hub in the laptop? Please let know me. Thank you

  Hello:

  According to the below user's guide, Chapter 2, pp 3-5, there is a USB 2.0 port on one side of the laptop and 2 ports USB 3.0, the other side of the laptop.

  http://h10032.www1.HP.com/CTG/manual/c03529460.PDF

  I do not own a notebook of g6 model, so I can't provide any other information on it.

• How to say the Ports USB Hi-Speed in sight... (A1700N)

  Trying to connect my Dell V515W printer to a USB Port of speed Hi. How will I know by sight... I can't pass the cable Installation. But green light on the printer, cannot print from the PC. PC is S/N: [number of Series edited by Moderator]... P/N: RK572AA 32-bit... Vista... Help/please...

  Again, all of the USB ports on your desktop HP Pavilion a1700n are high speed USB 2.0. You have not 'blue' art (SuperSpeed) USB 3.O ports on your computer. There isn't really a need for a diagram and it is not a really a diagram showing where to are all USB ports. Please see below for port locations;

  

  11 USB 2.0: 4

  and

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Multi-port USB adapter for the MacBook USB - C Port?

  Hello

  I'm in pain, trying to find a USB adapter multi-port for my MacBook 2016, which only has a single port USB - C which is also like a power port.

  I already done is connect the WD My Passport drive external HARD to the MacBook via an adapter HooToo, that to see any HARD drive mounted in OS X.

  OS X makes a sound when it is connected, but apparently the adapter provides insufficient power for the HARD drive needs to be loaded.

  I got Belkin USB multi-port here:

  http://www.Apple.com/us/search/USB-ports?SEL=accessories & src = SERP

  But it is not certain if one of them provides enough power, so I would try rather than a person has used successfully with a MacBook and an external HARD drive,

  If not, opt for a multi-port adapter USB brand Apple.

  Please let me know about your experience or an Apple adapter.

  Thanks in advance

  My Apple 3 port works as advertised. The USB port has a perfect compatibility with the old and readers USB 3, my adapter Ethernet USB Apple and Trendnet USB adapter that I use in series. This includes the perfect function with a 10 VM Windows via VMware Fusion.

  A non - Apple C to an adapter that I bought works fine too. I don't see the brand on this subject but he chose via Amazon ratings. There were some with higher ratings, so that's how I made the choice.

• need a HDMI cable to connect to the macbook pro via port USB - C

  Could someone please indicate what cable or adapter I need to run my MacBook Pro to a TV movies? It connects on the port of lightning or another? Thank you Jude.

  No MacBook Pro has lightning ports or ports USB - C.  Most have ports Thunderbolt, and some have even regular HDMI ports.

  The adapter you need to depend on the exact model of MacBook Pro you have.

  Until we can tell you what cable or adapter you need, you must tell us what model of MacBook Pro you have.

  You can watch in the Apple Menu-> about this Mac, option and after the year of model here.

  How to identify MacBook Pro - Apple Support models

• 700 - 330qe envy: activate the second ports USB 3.0 on motherboard Kaili

  I'm a 700-330qe and notice TWO USB 3.0 plugs blue on the motherboard of Kaili, but only one is in use that supports two ports USB 3.0 on the top of the computer case.

  Is it possible to activate the second USB 3.0 on the motherboard and add another cable longer 2 USB 3.0 ports on this computer?

  Thanks for any help,

  Chas Pearson

  Your request does not bother me, and I hope everyone.  DUH isn't stupid, I know where he is.

• Need new ports USB for Satellite Pro L450D

  Hello

  I ve tried to keep new ports usb for my Toshiba Satellite Pro L450D I ve called Toshiba and they said I have to put it in for repair, but the thing is - it's not is no longer in warranty so that I can t make and send to Toshiba for repair.

  for me would cost loads I ve asked Toshiba provide me for my laptop usb ports, but they won t so I would like to know where I can get these parts as one of my ports usb don t work because of my daughter in the first place to break them and the entire interior of the usb ports is broken.

  Help, please
  Thank you

  Hello

  At first, I must say that Toshiba service doesn t sell these small parts such as USB ports. USB ports are soldered to the motherboard.
  Where to get the new USB ports? Good question.

  I don t know where you MFL, but perhaps you should I use Google in your country and check if you can find some independent repairer for laptop and ask for help.
  I fear it won't be so easy to find new ports of m.

  What you can try is to buy defective mainboard in the hope of USB ports are OK and are trying to replace them.

• Ports USB 3.0 on Satellite L755-1LM

  Hello

  I have a 2 years Satellite L755-1LM. The leaflet said that he might have a USB 3.0 port, which was an option on some models.

  Is there an easy way to know if my model for this? I learned that USB 3.0 ports have a blue insert rather than black, but I don't know if this is true in all cases (mine is black). I am attaching a standard HDD USB 3.0 on the left USB port, which could be 3.0, but the transfer rate is poor. Therefore, it is either 2.0 only or I'm missing drivers etc.

  Any thoughts?

  Hello

  According to specification of your machine specifications has ports USB 2.0 only. The difference is that only one port on the left side support option sleep and fresh.

• HP SlimLine 450 - A24: Add an expansion card 4 ports USB 3.0 PCIe to a HP 450 - A24

  Hi, new to the forum.

  I have a HP Slimline 450 - A24 and would like to know if it is possible to install a port 4 USB 3.0 PCIe expansion card?  All I could find is that the expansion port was used. Is it possible to add even 4 port USB 3.0 PCIe expansion card?

  Thanks fror your help

  Hi @gulwing1,

  That the Forums are with you! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for more information on your system and whether it is possible to put a 4-port USB 3.0 PCIe card. I'm happy to give you a helping hand with this.

  Looking at the HP Slimline 450 - a24 Desktop PC product specificationsand HP and Compaq Desktop PCs - specifications (P-nutmeg nuts) of the motherboard, System Board lists no matter what expansion slot at all.  With this in mind, you cannot use a PCIe card in this system.

  It is unfortunately not the news you wanted, but answering your question. Please mark this message as a solution. Bravo would be appreciated as well.

  .