Possible bad SPA2102.

Similar Questions

• iWorks ' 09 (Pages 4.0.5) on El Capitan?

  Hey people, I use ' 09 iWorks (Pages v4.0.5) on an iMac in early 2009 under Snow Leopard 10.6.8. Thinking of upgrading to El Capitan... no idea if I will have compatibility issues if I update OS?

  What worries me is that I use the Pages and Numbers intensively for work (a lot of design work) and can't afford to lose access to current to create new documents/capacity.

  Thank you!

  Sandra

  Sandra,

  If you have still this detail iWork ' 09 DVD, you will need to reinstall after the upgrade of the El Capitan and then apply Update Apple iWork 9.3 to Pages ' 09 v4.3 - a sine qua non for compatibility El Capitan. The update, you'll have to v2.3 Numbers and Keynote 5.3 too. Note that I put the emphasis on a retail DVD iWork ' 09.

  I have Pages ' 09 installed v4.3 here on El Capitan 10.11.4 and it works fine. There are a few problems with the hyphenation does not properly, it lack signs of fusion and mailing functionality and the menu share: mail is unusable.

  Apple will not warn us that a next version of OS X break iWork ' 09 applications. They have retired and don't give it any thought.

  Skip the installation of any Keynote v6 applications, current page v3 and v5 numbers because they are not based and complete rewrites on the original code of iWork ' 09. They are subsets of function iWork ' 09 and introduce new, incompatible documents formats using the same file name extension. Alert from the quagmire.

  Before that you plan to upgrade, set a new post on the community of El Capitan points to consider before upgrading to Snow Leopard to El Capitan. It will give you good ideas to prevent the possible bad steps.

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• HP 10 G2 2301 Tablet: the correct charger for Hp 10 G2 2301 Tablet does not load

  The original charge cord for my Hp 10 G2 2301 Tablet does not load my tablet.

  Hi there @Bb16,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your tablet will not charge with the charge lead. I'm happy to help you with this.

  as you said that you are using the correct charge lead, I understand this document for reference: G2 HP 10 tablets - the Tablet is not fresh, I suggest to try your adapter into a different electrical outlet, preferably with a direct connection to wall to remove any other question possible bad connection.

  Y at - there no sign that there is no power at all?

  The connector on the Tablet seems to be loose?

  If you have access to another adapter, also, try to avoid the card itself.

  If none of those who make a difference, then browse this document. Tablets - HP Tablet does not (Android 5.0/Lollipop).

  If at the end, you are still having the same problem, then please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• OR PCI-8330 / not seen in Device Manager

  Hello

  I have a card NI PCI-8330. I tried this on 2 different computers (PCI slot) card and the card is not even detected in Device Manager.

  The "New Hardware Wizard" shows yet until it is.

  Possible bad card?

  Any suggestions please?

  Thank you!

  Windows XP SP3 Pro... I followed the instructions by using http://www.ni.com/pdf/manuals/322342c.pdf .

  I tested this configuration on 3 different systems (also running Windows XP Pro SP3)...

  The PXI chassis is turned on first before the computer (card PCI-8330, where)

  All 3 systems have the same sound as the BIOS is frozen and no MESSAGE product, be it. But if the PXI chassis is not enabled then the system boots right. .. ?

• Pavilion g7 - 1117cl: lost usb port in the laptop

  My wife tried to update to Windows 10.

  He has totally failed and 'lost' the drivers for the USB ports so that she cannot use her mouse.

  We spent MANY hours on the phone with Microsoft as they took control of the laptop and tried to fix it.

  Finally they told us that they believe there is some sort of virus on the disk, they can not delete? and that the laptop should have something on the 'partition' on the disk.

  They were not very clear about this, but he told us to contact HP.

  Our warranty has expired.

  Given this, if I do an original factory reset this will fix the problem or a virus caused a wrong to prevent a resumption of this way?

  Microsoft seems to think that a reset would not fix the problem.

  The laptop came with all the discs.

  We are NOT any sort of expert on computers, so we do not understand much of what they told us and we had problems to understand the accent of the person who was working on the issue.

  @Dfaris,

  Thanks for posting back.  Yes at this point, you will need perform a recovery of the plant on the laptop.  He's going to wipe the drive clean of any possible bad guys and set it back to the original configuration.

  Here is the link to help you with that.

  HP computers - performing a recovery of system HP (Windows 7)

  Thanks again for the post and have a great day.

• I get a 0xD0000006 error code when tring to use windows update

  I get a 0xD0000006 error Code when you use the default of windows update Setup

  d0000006

  Code: Error_Invalid_Handle - a possibility - bad hard drive

  Maybe a problem with a hard disk - important files may appear on the bad blocks.

  Try to run the "chkdsk/r" command at the command prompt

  You must open the command prompt by typing "cmd" in the start menu-> Run

  TaurArian [MVP] 2005-2010 - Update Services

• Gateway NE56R10u no video.

  How can I force video port monitor when starting, or is - ext this automatic when the cable is plugged?

  Laptop seems to start properly, but both screen and external monitor showing not any video at all.

  Possible bad mother?

  It turns out that one of my modules of memory is faulty.

  Thanks for your help Laurent. I appreciate your time and helping me get my laptop screen works again.

  Have a great day!

  Scott

• How security are the links posted in the answers to the questions?

  Earlier, I asked why the SP3 update to my SP2, explains a backup should be performed.  I was also asked why it was not conducted earlier. I'm still on SP2.  I don't want to lose the programs and software on my computer.  A backup really protect software as Front page?  With my answers provided the links and explanations, of course, I have not clicked.  People put these links in there for my benefit, but I still understand you're not not to click.  What I have to do is to try them on a computer that can take a bullet.

  While you're wise to be cautious about possible bad things that can happen to a PC, you must realize that the mere fact of being online (for example, only the reading e-mail) will ALWAYS have its risks.

  The irony is that because Windows has a large number of security vulnerabilities, the chances that your PC has been compromised (as well as your personal identity and financial information) is VERY high because you do not have a connected system! A system of Windows XP SP2 is VERY precarious. In fact, a number of people would like to recommend that you perform a clean install because of this.
  For links, you can reduce the risk of passing the mouse over the link to verify that it does not change. In other words, if you receive an email from 'phishing' of what you THINK is your credit/bank card company (let's say it's Chase) and the link LOOKS good, the mouse over it and see if decides to link to a strange name that is not familiar.
  But if a MS MVP as PA porter provides a link, I don't know that it will be safe.
  Here are mousing over the examples:
  This one REALLY goes to Google (you can predict that it will be by positioning the mouse on it and checking):
  http://www.Google.com
  It does not WORK:
  http://www.Google.com
  (Note that it will STRIVE to go to google.cxw3q9, which does not exist!)
  You're foolish to not be backing up your system! A reliable backup of the system WHOLE (by creating a clone or image of the ENTIRE disk) is the only way to protect your system, including ALL the programs installed on it! I prefer the image of the hard drive. Acronis True Image works fine. There are other programs, too, such as Paragon and Macrium Reflect, that to do this.

• HP officejet 6500 installed but a printing software unknown device... no driver installed?

  used cd to install printer hp 6500 office jet series. everything is supposed to be there. does not recognize the device. device manager unknown device States, no driver installed. using the usb connection. I tried 2 different cords and do not proceed with the connection. the drivers downloaded from the hp Web site and still no go. spent 45 minutes with hp today and I think I know more than them! Help, please. Windows xp (x 86) all updates are underway.

  Hello Sosocompliterate,

  Thank you for your message.  This computer connects to your printer via the USB port?  If Yes, are you able to use other USB devices on your computer?  You can try to change the output port the printer is connected to exclude a possible bad USB port on your computer.  Otherwise, if USB is detected on your computer and that you can't always not to recognize the printer, the result is most likely a bad cable or a defective printer.
  Please let us know.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run Chksk...

  Hello, I have problems with chkdsk.

  When CHKDSK runs at startup it freezes during step 2, so I can't run it at startup.
  I checked the drive using the command prompt "fsutil dirty query c:" and confirmed the disc to be dirty. I then restarted the PC in safe mode and run "chkdsk /f C:" tried, but I got this error:

  The type of file system is NTFS.
  Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

  I chose to do not to run it at startup, because of the problem of gel.

  I also ran the manufacturer diagnostic tool and it came clean on the quick and full scans.

  Recently, I got a blue screen error as well, but I have been unable to enter the error code, so I don't know if it's related...

  P.S. I accidentally posted this on the vista forums... In the case where someone wondered why he looked familiar.

  Here is a link to a TechNet forum dealing with this error: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/8749e819-cd86-4b51-9c27-5ac5c7c840e7
    
  It seems that the issue is going to be caused by a corrupted file system, the HD out or possibly bad memory. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start my inspiron 531 s

  could someone tell me what error code data 0F00:0244 incorrigible is and if there is anyway it from the disk installation or in any case to try running system restore?

  It is generally an area of possible bad hard drive (hdd) and the hard drive is a failure, needs to be replaced. the chance to do a system restore is extremely thin. It seems that the damage had occurred in the area of BONE that files is why restoring the system probably does not work.

  is the issue of data recovery, system restore or simply to fix windows?

• Free upgrade first or install new SSD first?

  Is it better to first make free update Win 7 to 10 then again clone SSD or Cloner 7 to the SSD then upgrade? If I want to do a clean install of 10 can I do this and use the installation 7 product ID number?

  You should not be cloning everything that duplicates all even possible bad sectors on the hard drive

  You create a system image in place and restore this image on the new SSD

  You can also use this image of the system if you win 10 is average to unstable to be reliable

  It's the best system image creator,

  http://www.Macrium.com/reflectfree.aspx

  Study it

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-update/creating-Windows-10-system-image/74952b21-4d75-4925-936c-5fe263346162

• Windows 7 connection help

  Went to sign in my profile and it starts to load so I can put my password but just goes back to the main screen with profile pictures. It doesn't let me not even an option to type a password. I tried safe mode several different ways with no luck. The furthest I can enter in Windows is the profile page. (where you pick what profile to sign in) I tried all the profiles and they all do the same thing. I tried to restart of lay successful reboot and it still does the same thing. Any ideas?

  Thank you

  Looks like this possibly - bad https://support.microsoft.com/en-us/kb/3097877 updated in a few days ago, which has since been replaced.

  • Solves the problems that occurred while users are connecting to the system. For example, after that only a user rebooted the computer, and then you press Ctrl + Alt + Delete to logon screen, the screen flashed and then went black. The user is then unable to continue. There may be similar problems of logon that are related to this issue.

  Give it a read, IF this is your problem, it should help.

• Help... with blue screen

  I own a Dell Inspiron 580.  Recently formatted my computer and now I get a random crash once a day.  This is the info that I can find in the event log if that helps.  Let me know if I can give you more information to solve this problem.  It's very frustrating.  It seems to happen when I alt tab of a game for a window.

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 06/11/2014-21:44:39
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Computer: Mike-PC
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  
   
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      6235
     
     
      System
      Mike-PC
     
   
   
      80
      0xfffff900c2400770
      0 x 0
      0xfffff96000606d15
      0 x 0
      fake
      0
   
  

  Thank you.

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  2: kd > .trap 0xfffff880068cc960
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff96000606cc4 rbx = 0000000000000000 rcx = fffff900c2ff3ce8
  RDX = 0000000040004740 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff96000606d15 rsp = fffff880068ccaf0 rbp = fffff900c2ff3ce8
  R8 = 0000000028120bd1 r9 = 0000000000000040 r10 = 00000000020ef5d0
  R11 = fffff880068ccb48 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  CDD! DrvAssociateSharedSurface + 0 x 51:
  fffff960'd 00606 15 399f50070000 cmp dword ptr [rdi + 750 h],ebx ds:00000000' 00000750 is?

  Failing education, we were comparing with rdi ebx + 750. Because of the ISR be null (volatile register) and not having not as ebx, address it is not possible to see what was the real problem here.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.

  Bugcheck 3B, {c0000005, fffff80002e868ae, fffff880096f5e40, 0}

  0: kd > fffff80002e868ae ln
  (fffff800'02e86888)   nt! ExEnterCriticalRegionAndAcquireFastMutexUnsafe + 0 x 26 |  (fffff800'02e868d0) nt! PsIsProtectedProcess

  NT! ExEnterCriticalRegionAndAcquireFastMutexUnsafe caused the access violation.

  -------------------------------

  Possible bad RAM, run Memtest for not less than 8 passes:

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the pre-compiled. ISO you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How does Memtest (you don't need to read, it's only for those interested in the details):

  Memtest uses algorithms (more precisely two), namely move reversal & what is considered Modulo-X. Essentially, the first algorithm filling memory with a pattern. From the address down, it checks to see if the model has been changed (it should not be), wrote the complement of bosses, increments the address and repeats. To from the highest address (as opposed to the lower), it follows the same checklist.

  The second algorithm is due to some limitations, the first being that all adjacent cells are currently tested for interaction due to modern chips being from 4 to 16-bit wide on the storage of data. That said, bosses are used to move forward and ensure that all adjacent cells have at least been written with all the possible combinations of a and zero.

  The second is that cache, buffer and disorderly execution implementation will interfere with the moving inversions algorithm. However, the second algorithm is not affected by this. For the offsets of 0-20 start, the algorithm will write every 20th location with a pattern, write all other locations with the addition of bosses, repeat the previous (or more) times and then check each location 20 for the reason mentioned previously.

  Now that you know how Memtest actually works, it is important to know that tests it passes through all mean something different. It will test 0 through 12 trials, which many use one or the other algorithm discussed above, among many other things.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick