OR PCI-8330 / not seen in Device Manager

Hello

I have a card NI PCI-8330. I tried this on 2 different computers (PCI slot) card and the card is not even detected in Device Manager.

The "New Hardware Wizard" shows yet until it is.

Possible bad card?

Any suggestions please?

Thank you!

Windows XP SP3 Pro... I followed the instructions by using http://www.ni.com/pdf/manuals/322342c.pdf .

I tested this configuration on 3 different systems (also running Windows XP Pro SP3)...

The PXI chassis is turned on first before the computer (card PCI-8330, where)

All 3 systems have the same sound as the BIOS is frozen and no MESSAGE product, be it. But if the PXI chassis is not enabled then the system boots right. .. ?

Tags: NI Products

Similar Questions

  • Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

    My problem is very similar to the one raised here:

    However, the OP in this question unfortunately never had answer to his question.
    When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
    I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
    I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
    I called Support of Windows games, who gave me information from these links:
    support.Microsoft.com/kb/908888
    support.Microsoft.com/kb/906347
    Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
    It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
    I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
    I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

    UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

    Here's what you do:
    1. plug your device and go to Device Manager
    2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
    3. disconnect your device
    4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
    5. plug your device back on and go back to Device Manager
    6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
    7. click on "browse computer driver software.
    8. click on "Let Me pick from a list of drivers for devices on my computer.
    9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
    If you have any questions, my email is * address email is removed from the privacy *.
  • Webcam does not appear in Device Manager

    I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

    I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

    Hello world

    I have windows 7, in the balk suggestion you type cmd

    then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

    Greetz

    Steve

  • Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

    My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
    Which driver should be used to solve the problem?

    I am using Windows 7 64 bit on it...
    Tried my level best to install the wifi adapter...

    Please help: (...)

    Hello

    Laptop seems to support the Realtek RTL8188CE WLan card.
    You have the Realtek Wlan driver that you can download here.
    http://APS2.toshiba-tro.de/WLAN/

  • Tecra 9100: sound card is not listed in Device Manager

    Hello
    I have a toshiba laptop 9100 that does not show me the sound card in Device Manager.

    I recently changed the laptop bobdy and uses a disk hard work that work very well with my old laptop which also has the same model and the sound used to work properly with this one. but since I changed my laptop, the sound just does not.

    I also tried to install all the latest drivers that I am running windows xp sp2, and there are drivers available who have a difficulty for this os. But when I try and install the drivers it always ends with a message warning "drivers are not installed.

    I tried to see if there is another way in which I can configure my sound, but it simply doesn't.

    Help, please!

    thanx

    Peppy

    [Edited by: admin August 6 05 08:52]

    Hello peppy

    If the sound card is not listed in Device Manager, the explanation is very simple. The card its doesn't exist for the operating system. Either card defective or not connected properly.

    Contact the Service partner and let check the device. Sorry, but in this case I put t see another solution.

    BR

  • Satellite A300 - 1-2 - card WiFi is not displayed in Device Manager

    I have TOSHIBA SATELLITE A300 1 2
    Model number: PSAGGE-00100JRU
    Operating system: Windows XP SP3

    On the server of the laptop, there is a sticker saying he took radio RT8187B device.

    Unfortunately this feature is not in the Device Manager.

    Tried to install different drivers (including the latest Realtek) - no result.
    Tried to add the device manually choose these drivers - no result.

    Switch the trigger switch on the front panel only translates the appearance/disappearance of device Bluetooth in Device Manager but the device wireless in not there.

    FN + F8 does not help also.

    Maybe someone has any ideas?

    All advice would be appreciated.

    Thank you.

    The Realtek RT8187B is the WiFi card in Notepad.

    You should try to update the driver. Search on the WIFI portal for an update:
    http://APS2.toshiba-tro.de/WLAN/

    More updated the BIOS to the latest version. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?

  • Satellite A300 PSAG4A: Webcam not detected in Device Manager

    I have a Toshiba Satellite A300 PSAG4A 02L00M with Vista Home Premium 64-bit.
    The webcam is not working and it is not detected in Device Manager.
    When I install the Chicony camera drivers, I get the "Webcam driver open fail. Error message.

    The fact that I can't see the Webcam in Device Manager tells me that there may be a hardware failure.
    However, I hope that this is a setting that I can fix myself.

    I had restored the laptop to factory also and I've updated the bios.
    I tried to uninstall all the USB controllers and reboot the PC.

    Is there something I can do?
    It's maybe a software problem?
    There may be a setting?

    Best way to test the operation of the equipment is to check with the factory settings installation operating system with the Toshiba recovery image. As I see that you have done this already.

    So if cam still doesn't work properly, I fear that there is a problem with the hardware.
    It cannot be matter of software because the recovery image contains the driver for the cam.

  • Tecra M9: WLan not working not - not displayed in Device Manager

    I've updated the Bios with the latest version, I turned on the switch on the front of the laptop wireless. I also tried FN + F8 but still no joy.

    I have reset the default settings of the BIOS without change. The wireless light flashes when the computer begins to start, but after that, it turns off.

    Any ideas greatly appreciated.

    Thank you.

    Hello

    You said that the WLan card is not listed in Device Manager?
    Did you check that exactly?

    Usually the WLan card must appear in Manager devices-> network adapters.
    You don't see any yellow exclamation?

    But to be honest, this story sounds really amazing.
    Have you used the good BIOS? On the Toshiba European driver page are 2 different Tecra M9 series listed and these two different series supports different versions of the BIOS!
    And the wrong version of BIOS that may affect the functionality of laptops!

    I have your comments would be appreciated

  • My network controller is not displayed in Device Manager - Acer S7. How can I get the application system

    I have Acer S7 391 sytem 9413. The blush of network controller seems to have disappeared. It is not listed in Device Manager. I was hoping someone could advise how I can get the system to recognize it again.

    REDA

    Ethernet controller tree is empty?

    If so, the only thing you can try is to restore the factory deafult your OS (reinstall) and check to see if the network cards.

    If this is not the case, there is probably a hardware problem.

  • Why is it not the ssd on the motherboard not appearing is not in the Device Manager?

    Why isn't the ssd does not appear in Device Manager or the bios?. V15 Nitro.

    your SSD is not visible/side since it is part of the Intel Smart Response SSD cache, so it is used only to speed up the HARD drive read/write data.

    http://www.Intel.com/content/www/us/en/architecture-and-technology/smart-response-technology.html

  • Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

    Is there anyway that I can update all my devices. I do not use the Device Manager by clicking one at a time.

    I have windows vista 32 bit.
    -------------------------------------------------------------------------------------------------
    Re-edit:-I do not use the Device Manager to find all my drivers and by clicking on each of them... one at a time update.
    Y at - it another way to find and update the drivers at the same time and for free.

    Your question is too terse and contains too little information for anyone to
    help you.  Read this article and try again:

    http://support.Microsoft.com/kb/555375

  • my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

    Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

    I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

    http://support.Microsoft.com/kb/982116/en-AU

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    See if the information above solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • CD/dvd drive is not listed in Device Manager

    my laptop is a hp pavillion entertainment pc dv6605us, running windows vista. the cd/dvd drive is not read / write any CD and it is not listed in Device Manager. I tried to fix this problem by using the microsoft fixit tool, but I'm still having the same problem. I checked the system registry and found no upperfilters and lowerfilters.
    Please, how can I solve this problem?

    Hello

    Step 1: Please do all the same underneath if you did some before as it is often the total process
    which solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista
    After starting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

    Windows 7 Pro.  Dell desktop computer.

    My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

    In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

    Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

    Tried system restore, but it failed.

    What should I try?

    Thank you

    Hi Bruce,.

    Thanks for posting your query on the Microsoft Community.

    With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

    I appreciate your efforts to resolve the issue.

    Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

Maybe you are looking for

  • Satellite A80 crash very often

    Very often my laptop goes down. I do not get the BSOD, but the screen has about 8 vertical lines on it. Within each section created by these lines, the display is distorted into small rectangles. You can see vaguely the display. None of the keys work

  • Applications of MS Office 2007 and Adobe 8.0 appearing is not in the list of Scan destinations to

    Series of all-in-One networking OfficeJet 7210 Under XP Pro with HP Director. Recently of the printer in the network through router Can scan directly from Adobe 8.0 Can configure scan TO destinations that are available (e-mail, WordPad, paint, save t

  • Is it possible to fix a corrupted by default profile

    After you fix a corrupted profile, I noticed that most of my programs to "all programs" was missing, but they still exist in program files/program (x 86).  I decided to save my information and the profile to remove completely.  I let the system to cr

  • How to add folio for each starting line of page

    Dear friend,I've been trying to script.In the Document every pages of first line and the first word before that I want add folio (page number).  Please suggest a friend. How to complete this script coding.Please see my requirement in the screenshot b

  • Cannot access ntfs shares to win 10 comments

    Using the player on the host Linux Mint 17.2. Improved to win 10 8.1 Pro and now actions "is not contactable." Seems to be ntfs permissions. Anyone using this combo?