Possible bug with adding the query to your Favorites

I noticed that when I create a MDX query say with a time range of 24 hours and then click on the "current query add to Favorites." When I click the "Favorite queries" button and pull again it changes hourly range custom and goes back to the time when I ran at the origin of the request and not for the last 24 hour period.

This is expected behavior?

It is in the 2.0.1 beta

Hey Chase,.

Yes, this is the expected behavior. Saved queries are both ONLY the slot is also recorded. For more information, see the following: Save a query in Insight Journal

"Saved queries include a fixed time slot and are not updated. By saving a query, you take a snapshot of the log messages available in the range of time right now, when you save. »

Tags: VMware

Similar Questions

  • Possible bug with report PPR sort on the login page

    Hi guys,.

    I created a report on the login page. Links for sorting, pagination and columns seem to not work.

    Here is an example on apex.oracle.com: http://apex.oracle.com/pls/apex/f?p=22519

    A very simple example with all the default settings on the table of demo MATERIAL. I guess it's releated for not having a valid user on page 101. Sorting preferences are stored by the user.

    See you soon,.
    Dietmar.

    Hi Dietmar,

    Anthony has considered this matter and this behavior is limited to the login page, i.e. the page mark you as the "session invalid page" in your authentication scheme. If you make a copy of your example page, paging and sorting would actually be working very well.

    Kind regards
    Marc

  • Bug with renaming the tabs (4.0.0.13.80)

    Hey all,.

    I noticed a bug to rename tabs of the query results. If 2 or more tabs with the same name, the content of the window does not change when you select a different tab with the same name.

    To reproduce:

    Open a spreadsheet

    Run query "select 'test' from dual;

    Rename the "Query results" tab to "test".

    Race explain the plan on the above statement

    Rename the "Explain Plan" tab to "test".

    Click on the first tab of the test, the content will still display the content of plan to explain.

    If this is not the right place to post this bug, please let me know where I should post instead.

    Thanks for reporting this. We recorded bug18106727 to draw it. Thank you.

  • Possible bug in implementing caching query ColdFusion 10

    I have stumbled upon a bug in caching of queries in ColdFusion 10.  I wanted to see if anyone else had seen this before as I've submitted a bug report.  It will be difficult to set up a full test case, so I hope that a description will be enough to confirm if this is reproducible.

    First, I create an array of structures.  Each structure is a set of key/value pairs of the arguments that will be passed to a query.  The first two keys contain numeric values, the third a string value.  I asked a Microsoft SQL Server database.  My query is inside a loop of table.  The query contains the CachedWithin attribute to 1 hour. In the query, I pass values in the structure in the clause WHERE using CFQueryParam.

    If two sets of numeric values are quite similar, but not identical, ColdFusion will jumble the values and hidden bad back the query result set.  For example, values in my table:

    [{BookNo = 97, NUMPAGE = 1, match = 'Card of the evaluator'}, {BookNo = 212, NUMPAGE = 50, match = 'Card of the evaluator'}, {BookNo = 250, NUMPAGE = 12, match = 'Card of the evaluator'}, {BookNo = 97, NUMPAGE = 1, match = 'Card of the evaluator'}]

    When I run the page for the first time with an empty query cache, this is what I get:

    1. Search results for BookNo 97, NUMPAGE 1. (non-cached)
    2. Search results for BookNo 212, NUMPAGE 50. (non-cached)
    3. Search results for BookNo 212, NUMPAGE 50. (cached)
    4. Search results for BookNo 97, NUMPAGE 1. (cached)

    What should I get:

    1. Search results for BookNo 97, NUMPAGE 1. (non-cached)
    2. Search results for BookNo 212, NUMPAGE 50. (non-cached)
    3. Search results for the BookNo 250, NUMPAGE 12. (non-cached)
    4. Search results for BookNo 97, NUMPAGE 1. (cached)

    See the problem with the third iteration, it's pulling the same results of the second iteration.  If I remove the CachedWithin, achieve the desired results.  If I create my own CacheID, I get the expected results.  It's only when I let ColdFusion handle the cache on its own I get incorrect results.

    Someone at - he seen anthing like that?  This look like a bug legitimate which must be filed?

    -Carl V.

    @BKBK,

    It's too complex for me to say. I have these questions, for example:

    (1) when the loop is processed, ColdFusion treats 4 queries consecutively?

    (2) a comparison of SQL statements is one of the controls that ColdFusion is running to decide whether to perform a given query or use cached data. Data using cfqueryparam binding has an effect on the SQL statement?

    (3) place a cfdump of the request as the last statement in the loop. A query dump tells you if a query is cached. You see what queries are cached?

    1. Yes.
    2. Oooh!  I've been using cfqueryparam.  I removed the cfqueryparams, and now he behaves as expected.  Seems that there is a bug when combining cfqueryparam and caching.
    3. Already had this and it was the results cached for the second query processing allegedly the third query (see the original post for the expected and actual results).

    -Carl V.

    Update: and it seems that it is a known bug, after all, with the layout of the query cache and cfqueryparam: https://bugbase.adobe.com/index.cfm?event=bug&id=3369530.  I'll add my vote, and perhaps others can also.

    Update 2: and looking more closely, it looks like it has been fixed in an everything-to-be-released version.  I hope that we will get it soon.  A suggested workaround solution was to place the values of cfqueryparam in a SQL comment, which seems to help CF recognize the single request instructions and cache correctly.

    Post edited by: Carl Von Stetten

  • Possible bug with waveform graph

    LabVIEW bug recently while I was going to create a vi to convert grapg labview in trend, I find a little bug graph labview and the roots of waveform that is impossible to solve unless the national instrument correct codes

    bug is that invert mood of the chart if your minimum data are not zero, starting point of the grid is not working well and then you loos your grids.

    anyone else having the same problem? You can find more explain in my LinkedIn Natalie Ford


  • Possible bug? Change the geometry on the hair, the changes are lost when the model is saved, then loaded into fuse again.  Is this a bug?

    When I save the changes to the hair using the tool change the geometry in a file .fuse on the computer.  These changes are lost when I load the model to the fuse.  Is this a bug?

    Saved to disk:

    Screen Shot 2015-12-08 at 10.08.14 PM.png

    Reloaded in fuse:

    Screen Shot 2015-12-08 at 10.09.47 PM.png

    Post edited by: Allan Chaney I've included screenshots.

    Thank you much for the details.  I tested it on Windows and Mac and reproduced.  Doesn't seem to be a bug (but not a guarantee).  I've done some characters, recorded their soft-mod-ness very well.  I connected with the engineers for more tests and we will have fixed as soon as possible!

  • A possible bug related to the Cisco ASA "show access-list"?

    We had a strange problem in our configuration of ASA.

    In the "show running-config:

    Inside_access_in access-list CM000067 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:http_access

    Inside_access_in access-list CM000458 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:https_access

    Note to inside_access_in to access test 11111111111111111111111111 EXP:1/16/2014 OWN list: IT_Security BZU:Network_Security

    access-list extended inside_access_in permit tcp host 1.1.1.1 host 192.168.20.86 eq 81 Journal

    access-list inside_access_in note CM000260 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - dgm

    access-list inside_access_in note CM006598 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - ns

    access-list inside_access_in note CM000220 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:netbios - ssn

    access-list inside_access_in note CM000223 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:tcp / 445

    inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 any eq www log

    inside_access_in allowed extended access list tcp 172.31.254.0 255.255.255.0 any https eq connect

    inside_access_in list extended access permit udp 172.31.254.0 255.255.255.0 any eq netbios-dgm log

    inside_access_in list extended access permit udp 172.31.254.0 255.255.255.0 connect any eq netbios-ns

    inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 any eq netbios-ssn log

    inside_access_in list extended access permitted tcp 172.31.254.0 connect any EQ 445 255.255.255.0

    Inside_access_in access-list CM000280 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:domain

    inside_access_in list extended access permitted tcp object 172.31.254.2 any newspaper domain eq

    inside_access_in list extended access permitted udp object 172.31.254.2 any newspaper domain eq

    Inside_access_in access-list CM000220 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:catch_all

    inside_access_in list extended access permitted ip object 172.31.254.2 any newspaper

    Inside_access_in access-list CM0000086 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:SSH_internal

    inside_access_in list extended access permitted tcp 172.31.254.0 255.255.255.0 interface inside the eq ssh log

    Inside_access_in access-list CM0000011 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

    inside_access_in list extended access allow object TCPPortRange 172.31.254.0 255.255.255.0 host log 192.168.20.91

    Inside_access_in access-list CM0000012 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:FTP

    access-list extended inside_access_in permitted tcp object inside_range 1024 45000 192.168.20.91 host range eq ftp log

    Inside_access_in access-list CM0000088 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

    inside_access_in access list extended ip 192.168.20.0 255.255.255.0 allow no matter what paper

    Inside_access_in access-list CM0000014 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:DropIP

    inside_access_in list extended access permitted ip object windowsusageVM any newspaper

    inside_access_in list of allowed ip extended access any object testCSM

    inside_access_in access list extended ip 172.31.254.0 255.255.255.0 allow no matter what paper

    Inside_access_in access-list CM0000065 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:IP

    inside_access_in list extended access permit ip host 172.31.254.2 any log

    Inside_access_in access-list CM0000658 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security

    inside_access_in list extended access permit tcp host 192.168.20.95 any log eq www

    In the "show access-list":

    access-list inside_access_in line 1 comment CM000067 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:http_access

    access-list inside_access_in line 2 Note CM000458 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:https_access

    Line note 3 access-list inside_access_in test 11111111111111111111111111 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security

    4 extended access-list inside_access_in line allowed tcp host 1.1.1.1 host 192.168.20.86 eq newsletter interval 300 (hitcnt = 0) 81 0x0a 3bacc1

    line access list 5 Note CM000260 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - dgm

    line access list 6 Note CM006598 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - ns

    line access list 7 Note CM000220 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:netbios - ssn

    line access list 8 Note CM000223 EXP:1/16/2014 OWN inside_access_in: IT_Security BZU:Network_Security JST:tcp / 445

    allowed to Access-list inside_access_in line 9 extended tcp 172.31.254.0 255.255.255.0 any interval information eq www journal 300 (hitcnt = 0) 0 x 06 85254 has

    allowed to Access-list inside_access_in 10 line extended tcp 172.31.254.0 255.255.255.0 any https eq log of information interval 300 (hitcnt = 0) 0 x7e7ca5a7

    allowed for line access list 11 extended udp 172.31.254.0 inside_access_in 255.255.255.0 any netbios-dgm eq log of information interval 300 (hitcn t = 0) 0x02a111af

    allowed to Access-list inside_access_in line 12 extended udp 172.31.254.0 255.255.255.0 any netbios-ns eq log of information interval 300 (hitcnt = 0) 0 x 19244261

    allowed for line access list 13 extended tcp 172.31.254.0 inside_access_in 255.255.255.0 any netbios-ssn eq log of information interval 300 (hitcn t = 0) 0x0dbff051

    allowed to Access-list inside_access_in line 14 extended tcp 172.31.254.0 255.255.255.0 no matter what eq 445 300 (hitcnt = 0) registration information interval 0 x 7 b798b0e

    access-list inside_access_in 15 Note CM000280 EXP:1/16/2014 OWN line: IT_Security BZU:Network_Security JST:domain

    allowed to Access-list inside_access_in line 16 extended tcp object 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 0x6c416 81 b

    allowed to Access-list inside_access_in line 16 extended host tcp 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 0x6c416 81 b

    allowed to Access-list inside_access_in line 17 extended udp object 172.31.254.2 any interval information journal field eq 300 (hitcnt = 0) 227 0xc53bf

    allowed to Access-list inside_access_in line 17 extended udp host 172.31.254.2 all interval information journal field eq 300 (hitcnt = 0) 227 0xc53bf

    access-list inside_access_in 18 Note CM000220 EXP:1/16/2014 OWN line: IT_Security BZU:Network_Security JST:catch_all

    allowed to Access-list inside_access_in line 19 scope ip object 172.31.254.2 no matter what information recording interval 300 (hitcnt = 0) 0xd063707c

    allowed to Access-list inside_access_in line 19 scope ip host 172.31.254.2 any which information recording interval 300 (hitcnt = 0) 0xd063707c

    access-list inside_access_in line 20 note CM0000086 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:SSH_internal

    permit for line access list extended 21 tcp 172.31.254.0 inside_access_in 255.255.255.0 interface inside the eq ssh information recording interval 300 (hitcnt = 0) 0x4951b794

    access-list inside_access_in line 22 NOTE CM0000011 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:PortRange

    permit for access list 23 inside_access_in line scope object TCPPortRange 172.31.254.0 255.255.255.0 192.168.20.91 host registration information interval 300 (hitcnt = 0) 0x441e6d68

    allowed for line access list 23 extended tcp 172.31.254.0 inside_access_in 255.255.255.0 192.168.20.91 host range ftp smtp log information interval 300 (hitcnt = 0) 0x441e6d68

    access-list inside_access_in line 24 Note CM0000012 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:FTP

    25 extended access-list inside_access_in line allowed tcp object inside_range Beach 1024 45000 host 192.168.20.91 eq ftp interval 300 0xe848acd5 newsletter

    allowed for access list 25 extended range tcp 12.89.235.2 inside_access_in line 12.89.235.5 range 1024 45000 host 192.168.20.91 eq ftp interval 300 (hitcnt = 0) newsletter 0xe848acd5

    permit for access list 26 inside_access_in line scope ip 192.168.20.0 255.255.255.0 no interval 300 (hitcnt = 0) newsletter 0xb6c1be37

    access-list inside_access_in line 27 Note CM0000014 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:DropIP

    allowed to Access-list inside_access_in line 28 scope ip object windowsusageVM no matter what information recording interval 300 (hitcnt = 0) 0 x 22170368

    allowed to Access-list inside_access_in line 28 scope ip host 172.31.254.250 any which information recording interval 300 (hitcnt = 0) 0 x 22170368

    allowed to Access-list inside_access_in line 29 scope ip testCSM any object (hitcnt = 0) 0xa3fcb334

    allowed to Access-list inside_access_in line 29 scope ip any host 255.255.255.255 (hitcnt = 0) 0xa3fcb334

    permit for access list 30 inside_access_in line scope ip 172.31.254.0 255.255.255.0 no interval 300 (hitcnt = 0) newsletter 0xe361b6ed

    access-list inside_access_in line 31 Note CM0000065 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security JST:IP

    allowed to Access-list inside_access_in line 32 scope ip host 172.31.254.2 any which information recording interval 300 (hitcnt = 0) 0xed7670e1

    access-list inside_access_in line 33 note CM0000658 EXP:1/16/2014 OWN: IT_Security BZU:Network_Security

    allowed to Access-list inside_access_in line 34 extended host tcp 192.168.20.95 any interval information eq www 300 newspapers (hitcnt = 0) 0x8d07d70b

    There is a comment in the running configuration: (line 26)

    Inside_access_in access-list CM0000088 EXP:1/16/2014 OWN Note: IT_Security BZU:Network_Security JST:PortRange

    This comment is missing in 'display the access-list '. In the access list, for all lines after this comment, the line number is more correct. This poses problems when trying to use the line number to insert a new rule.

    Everyone knows about this problem before? Is this a known issue? I am happy to provide more information if necessary.

    Thanks in advance.

    See the version:

    Cisco Adaptive Security Appliance Software Version 4,0000 1

    Version 7.1 Device Manager (3)

    Updated Friday, June 14, 12 and 11:20 by manufacturers

    System image file is "disk0: / asa844-1 - k8.bin.

    The configuration file to the startup was "startup-config '.

    fmciscoasa up to 1 hour 56 minutes

    Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor

    Internal ATA Compact Flash, 128 MB

    BIOS Flash M50FW016 @ 0xfff00000, 2048KB

    Hardware encryption device: Cisco ASA-5505 Accelerator Board (revision 0 x 0)

    Start firmware: CN1000-MC-BOOT - 2.00

    SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

    Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.06

    Number of Accelerators: 1

    Could be linked to the following bug:

    CSCtq12090: ACL note line is missing when the object range is set to ACL

    The 8.4 fixed (6), so update to a newer version and observe again.

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Possible bug with paragraph styles?

    Make a page with three breakpoints

    Add a block of text for the breakpoint

    Type "The CO2 is carbon dioxide" in text

    Format of the text frame in red "BOLD" (from the text window)

    Click on 'Create a new style of the applied attributes' (in the window paragraph styles)

    Apply the new style to two other break points

    Select the number 2 in the largest block of breakpoint text and format it as a script (from the text window)

    Select the text block, and then select 'Copy the formatting of the text-> all breakpoints'

    Check that all three break points seem correct

    Save the Muse site

    Narrow muse site

    Site open from muse

    Note that the formatting has been removed from all three break points

    Anyone else do this?

    The only workaround that I understood is not to copy text formatting to all the break points. He made the very tedious text formatting, but seems to work.

    Hi williamb72631036,

    I am able to reproduce the problem. You certainly found a bug, and I think you're right that this has to do with the help of "copy the text formatting of...» ». I can actually reproduce the bug without the help of paragraph styles.

    The only workaround that I understood is not to copy text formatting to all the break points. He made the very tedious text formatting, but seems to work.

    Rather than use the copy text formatting at all breakpoints, try switching the tool "4 t / 1 t" text in all of the breakpoints.

    When the setting is "4t" (as in the screenshot), then any changes you make to the text attributes are automatically applied through breakpoints. Just be sure to return it 1 "t" If you need to make a change in a specific breakpoint. Note that this is a comprehensive framework for setting and not by text.

    I hope this helps! And thanks for reporting this issue with clear steps.

    Anna

  • Help with adding the plugin management employment type

    I'm playing with that. When I try to add the definition of my work to the creation of plugin via emcli add_mp_to_mpa I get the following error

    Error: JOB_DEFINITION is not a supported file type

    Here is my complete order

    add_mp_to_mpa-mpa = emcli "netapp_smo_database.jar" - mp_version = "1.0" - ttd="Z:\MyDocuments\OEM-playing\metadata\my_database.xml»-dc="Z:\MyDocuments\OEM-playing\default_collection\my_database.xml»-file="MONITORING_SCRIPT:Z:\MyDocuments\OEM-playing\scripts\my_database_backups.pl»-file="JOB_DEFINITION:Z:\MyDocuments\OEM-playing\jobs\my_database_backup.xml '-func_desc = "Plugin Prototype to demonstrate the integration of my special safeguard system a database script" "

    I did look at some of the existing plugins and see, for example in the plugin VMware ESX that there JOB_DEFINITION file types in this Management Plugin.

    What Miss me?

    It seems that you have an old version of the definition of client/verb emcli. You can try running 'emcli sync' and who will update your definitions of Word of WHO. You'll need either a CMS which is version 10.2.0.3 or later or an emcli client downloaded from a CMS 10.2.0.3 or version later.

  • Problems with adding the certificate

    Hello everyone, I am writing an application that needs to add the certificate in a keystore. I managed to add a certificate to DeviceKeyStore. But I have a question it is up to the user to mark them as being approved. Is it possible to trust automaticly? Useful information or links will be really useful. Thank you in advance.

    It is not possible to mark a certificate as being approved by program.  The user needs to do this.

  • Possible bug with isGroup property

    Hi all

    Just a brief overview of what I'm trying to achieve.

    Often, I am facing problem fonts corrupted Flash files because some smart graphics people rather that you select the font in the font list type in the box that it is corrupt.

    To resolve this problem, I started creating a JSFL who find all the textfields on stage and in the library and correct the police. It works very well except in the case where the textfield object is in a group: it has been grouped. This problem is solved to disassociate an item but creates a problem with forms :(

    Suppose there is a shape on the stage and is grouped and I run the jsfl it successfully to separate the form but where the form is divorced and I run the JSFL it throws an error

    UnGroup() service is currently unavailable

    I tried to set the condition to avoid problems

    [PHP] if ((ormes .elementType == "shape") & & Etienne.isGroup) {}
    fSelectElement (Elm )
    currentDoc.unGroup ();
    } [PHP]

    isGroup property returns true for the grouped shape and form dissociated. This is why the error and I cannot solve the problem :(

    Hope someone can help with this...


    Here's the complete JSFL

    Http://www.2xupload.de/file/dfd82bb334a36f2fba4934d95e48db57/JSFL.txt.html [CODE] [/ code]

    Path can be fully copied
    C:\Documents and Settings\ < username >\Local 8\en\Configuration\Commands application



    Steps to reproduce this problem:

    1 create a shape on the stage. Select the shape and group (CTRL + G).

    The work of fine jsfl disassociates the form.


    2 create a shape on the stage.

    Running the jsfl throws the error.

    Forms will act as groups to be chosen. You will want to choose the form
    Then locate isGroup.

    "nITiNkIlLeRmEeRuT" wrote in message
    News:f09jhm$8R0$1@forums. Macromedia.com...
    > Hi all,
    >
    > Just a brief overview of what I'm trying to achieve.
    >
    > I frequently have problem face fonts corrupted Flash files because some
    > smart
    > people graphics rather than you select the font in the list of type fonts
    > in
    > the box that it is corrupt.
    >
    > To resolve this problem, I started creating a JSFL which will find all the
    > textfields on stage and in the library and correct the police. It works very well
    > except
    > in the event that the textfield object is located in a group: it has been grouped.
    > This
    > problem is solved to disassociate an item but creates another problem with
    > shapes :(
    >
    > Assume that there is a form on stage and are grouped and I run the jsfl it
    > separate successfully the form but in the case of the form is dissociated and me
    > run
    > the JSFL, it throws an error
    >
    > UnGroup() service is currently unavailable
    >
    > I tried to set the condition to avoid problems
    >
    > [PHP] if ((ormes .elementType == "shape") & ELMS.isGroup) {}
    > fSelectElement (Elm )
    > currentDoc.unGroup ();
    >} [PHP]
    >
    > but the isGroup property returns true because both grouped shape and dissociated
    > form.
    > Thats why the error and I cannot solve the problem :(
    >
    > Hope someone can help with this...
    >
    >
    > Here is the comprehensive JSFL
    >
    >
    > Http://www.2xupload.de/file/dfd82bb334a36f2fba4934d95e48db57/JSFL.txt.html [CODE]
    > [/ CODE]
    >
    > Path to copy
    > C:\Documents and Settings\ Settings\Application
    > 8\en\Configuration\Commands application
    >

  • Possible bug with popup LOVs

    Hello

    "I've created a Popup LOV (retrieves the first set of lines and filters), at the point where I open the popup and try to pick up anything by pressing the 'enter' key I m getting error" the requested URL /pls/otn/wwv_flow_utilities.gen_popup_list was not found on this server. »

    Also, if I have a certain value in the popup box and click on the little popup icon, I get the same error.

    I created an example page http://apex.oracle.com/pls/otn/f?p=50942:21

    Thank you
    Manish

    Manish,

    The page that you saw, http://apex.oracle.com/pls/otn/f?p=50195:1 is a kind of master/detail/detail report.

    There are two hidden items on the page to follow the customer "perceive" and order. The links in the customer report and order simply redirect to the same page, defining the hidden field on the pk for the selected customer or order.

    Customers and Orders queries are

    select decode(customer_id,
             :P1_CUST_ID, 'CURRENT',
             'Select') sel_label,
       customer_id,  cust_last_name||', '||cust_first_name cust_name,
       cust_street_address1||'
    '||Cust_city||', '||
       cust_state||'  '||cust_postal_code address
  from demo_customers

  select decode(order_id,
               :P1_ORDER_ID, 'CURRENT',
               'Select') sel_label,
         order_timestamp, order_total, order_id
    from demo_orders
 where customer_id = :P1_CUST_ID

    You can see in each of them there is a decoding that compares the value hidden in the current KP, if it matches it returns CURRENT, otherwise select, this column is given an alias of SEL_LABEL. It is used as the link text, and it is also used in the model.

    When a new customer is selected I have a process that will solve the first as current order for this customer, it's

     declare
    cursor data_cur is
       select order_id, order_timestamp
         from demo_orders
        where customer_id = :P1_CUST_ID;
 begin
    open  data_cur;
    fetch data_cur
     into :P1_ORDER_ID, :P1_ORDER_DATE;
    close data_cur;

    It is subordinate to the

    :P1_CUST_ID is not null and
:P1_ORDER_ID is null

    The model is a copy of the current topics in model alternation of colors. Most of the themes have a similar model. The report model can have up to 4 column templates, with or without conditions. The APEX motor will assess conditions and use the first one that is true (or no condition).

    The difference in most alternative models of color is the class applied to the td, alt of a data tag data, IE. t12data and t12dataalt.

    In my example, the first model of the column is defined as

    #COLUMN_VALUE#

    with a PL/SQL according to the expression of

    '#SEL_LABEL#' = 'CURRENT'

    You can see that it refers to the SEL_LABEL column and looks for the value of the CURRENT

    The second column model does suffer from any disease and is defined as

    #COLUMN_VALUE#

    Hope that helps
    Larry
    Don't forget to mark the answers useful or correct ;)

  • {Possible bug} Parameters of the method inside the Interface method is misinterpreted by implemetor

    Steps to reproduce:

    1. my 4.6 version s FLash generator

    create the Interface:

    the package managers {}

    public interface ICommand {}

    public function get listener(): int;

    public function get params(): IMap;

    }

    }

    2.

    Implement the interface:

    the package managers {}

    public class order implements ICommand {}

    / / I'm not declaring the listener and params here, but code compiles the file and there is no redmarker errors is.

    public void Command (listenerParam:Function, params: IMap): Boolean {}

    This.Listener = listenerParam;

    This.params = params;

    }

    }

    }

    This cod eabove compiles without errors:

    fexfrmatter it's a waste.

    Never mind.

  • Stop adding files CC to your Favorites

    Is it possible to get the creative application Cloud to stop adding a shortcut in the list of favorites in Windows? I deleted several times, but it keeps having added. I don't see an option anywhere to turn it off, and it is a little annoying because I do not use cloud storage functionality at all (I have disabled synchronization of file).

    Hello

    Ask contact you support: contact customer service

    *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

    Kind regards

    Bani

  • How the message to your Favorites

    How to set my watch to be able to text my favorites more quickly

    Hello

    Under watch OS 3, to send a new message using your Apple Watch Messages:

    • Use Siri: for example "Hey Siri, say Jane I'll be there in 30 minutes" and then lower your wrist to send (No button tap / press is necessary).
    • Open your Messages > firmly press the list of conversations > tap new Message > tap Add a Contact, then either:
      • Tap a contact in the list of recent conversations that appears;
      • Or tap on '+' to select your complete contacts list;
      • Or press the Microphone button to search for a person in your contacts or dictate a phone number.

    More information:

    https://help.Apple.com/watch/#/apd92a90f882

Maybe you are looking for