Possible problem with a kit PLK300 AV Networking light a touch lamp

Similar Questions

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• "You must be logged in as an administrator to install this program" error when I AM logged on as administrator. possible problem with TrustedInstaller security

  I am logged in as administrator on the single computer.  I try to install Net Nanny, which claims to be compatible Windows 7.
  The first time I tried to install it I got the error, simply, 'access denied '.  After several attempts with the same error, I rebooted in Mode safe mode with network and then got the error that the Windows Installer Service is not accessible.  After some research, I discovered that Windows Installer is not available in safe mode.
  So I booted in Normal mode.  Logged as administrator.  Tried to click with the right button on the installer downloaded for Net Nanny and ran as administrator, the connection of the administrator.  Now I get the error, "You must be logged in as administrator to install this program."  I am.
  I closed all firewalls, anti-virus software AND turn off the UAC.  I checked the compatibility AND security for the download tab and it is configured to run as administrator and I tried to run in several modes of compatibility.  I still don't "You must be logged in as administrator to install this program."  No matter what I try, I still get this error.
  I used the command prompt, type msiexec.exe / unregister, and then msiexec/regserver.  No new results.  Still the same error.

  I called Net Nanny press SEVERAL times and they will know that this is a Windows problem, because this is the first time that they already got this error.  They had me to download another file on a mirror site.  Not always the same error.  People what I'm doing wrong?  I was able to successfully install other software.  Thanks for any help!

  UPDATE * I am researching always this.  This would be a TrustedInstaller security problem?  If this is the case, is it possible to fix the TrustedInstaller or turn it off?  The big question, is that I want to turn it off?  My first thought is 'no '.  However, this software is listed on the Microsoft site as being compatible with Windows 7.  Therefore, an application that is 3rd party that is accepted by Microsoft.  Wow, I'm confused.  Don't know what to do here.

  Hello carpetfresh,

  A test, I temporarily disable user account control and then see if you can install Net Nanny. If so, we know that UAC is what is causing the problem with the installation.

  1. access control panel user to the Start Menu-> Control Panel-> user accounts and of security for the family-> user account

  2. click on the settings of the user account controll link.

  3. move the slider to never notify

  4. click OK for the changes to take effect

  5 reset.

  Once you have correctly installed the Net Nanny, then back to the control panel and reactivate the UAC.

  Answer please come back and let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Possible problems with opening and El Capitan

  I just bought a mbp 15 "and upgrade to el capitan for I had read that work with the new OS, but when I tried to install a pop - up came saying that installation will take place, but that it could damage the computer, so I called apple for more advice on the issue, but given the fact that I live in the Mexico proapps guy could not help me. Now I'm going to try my luck, but what would be the possible problems that I could meet and would be set by an errase 'factory '?

  Specifications of the computer:

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Thanks and forgiveness English...

  I have the opening on the MBP, where I El Capitan (10.11.1) installed and I had no problems with it.  What version do you have?

  Ciao.

• Problems with Isatap adapter and Wirelesss network.

  The system is a sony viao and it's a windows vista too. It is impossible to connect to the wireless network. I checked Device Manager and noticed that the map isatap #4 and #5 do not work properly. How can I solve this problem?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Microsoft-ISATAP-adapter-4-not-working/ef9c6ad9-623e-416F-8D9F-8e3d83d998ca?page=2#LastReply

  Please start your own Thread in these Forums.

  You are replying to a Thread 2009; It comes to 2014.

  ________________________________________

  Read this, you can:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520/en-us

  Windows cannot load driver (Code 31), etc.

  RESOLUTION

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  ____________________________________________

  You do not tell us the error your when you try to connect to the wireless network.

  We don't know if it's drivers or you have put in place correctly.

  Use the computer that you use to get here for access to the Sony site > downloads Section > key in your model number and operating system > find NETWORK card drivers > download and save > use copy to a flash drive and transfer and install them.u here to access the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > finding drivers > download and save their > copy to a flash drive and transfer and install them.

  See you soon.

• Problems with the windows/debian home network after router switch

  Hi all:

  I'm new on all the forums, but desperately need help. Even though I am not new on windows and have been building my own computers for years, I am pretty new to networking and also for Linux.

  I have a home network with 3 computers with windows 7 installed and my server with Debian Squeeze. Somehow I've muddled through the installation of debian and even on my network using samba (after days of research). Everything has been great to work with all 3 computers and my server talking to each other.

  I got internet connection across the home network, and all the computers + Server appeared and was accessible on the LAN. It was with a little D - link DIR-601, last week I lost all the internet connect to Comcast, which turned out be their problem but Comcast informed me that my router was not the best and he was originally put my speed problems.

  So I bought a new router Linksys WRT54GL and installed yesterday and it's where I need help... I have internet connection and you can surf the web on all computers 3 windows and the debian server, all computers 3 windows appear and are accessible on the LAN, but not the debian server.

  As soon as I reinstall the D-link router, everything is back to normal. I tried with my limited knowledge of Linux to change network configuration files in my debian server but so far no change. I'm not sure this is a linux problem or a problem with linksys... If anyone has any ideas on how to solve this problem, I could use you help... Thank you ALL!.

  Thanks for your suggestions, but it turns out that the problem was a Linux problem, after changing routers, I had to make some changes in debian Linux as share. I'm on duty again.

• Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

  A problem with your wireless network card Your wireless card has stopped working properly. To see if an updated version of your WLAN card is available

  Hello Jeroen Ratz,

  You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Possible problems with the database in double training?

  Hi all!
  
  First of all, please forgive my ignorance! I only worked with databases slightly over the past two years and so far only with MySQL and MS SQL.
  
  Recently, the company I work for bought a new Oracle requiring package. We bought a copy of Oracle 10.2 in the case and the company who resell it to us and set up for us, we have been denied access to the database on our server, dev because it would expose their underlying data schema. I wasn't in the change when the decision was made and we have spent money on a paralyzed copy of Oracle, but it's in the past.
  
  Because we have not dev access to Oracle, we are unable to create a database of training for this new software in the home. We pay this company to create a test environment for us. I was told that it would cost $500, until technology has said it will install Oracle on the server of our training.
  
  At this point, I stopped him and said $ 500, they'll be violating their license agreement, or by giving us a free copy! The other possibility is that they were going to install this and then just this law we for Oracle, despite citing the work at $500.
  
  Technology that was about to proceed with the installation went to check with someone of higher rank and then returned to inform me that install the second copy of Oracle would require license more fresh indeed.
  
  This verified what I already told him, and I said, we want a database on our existing Oracle server and copies of the new training software can just point to this training base.
  
  He must now take time with senior technicians while they "analyze the existing database server or the environment. He was trying to tell me to install a database on the existing server and rather buy another copy of Oracle, which seems to me to be a total drain cash. He had no solid reason why it could not do, but refused anyway and said he needs to talk to a senior technician (the same one who said that Yes, we you will need to purchase a second copy of Oracle instead of using a second database on the existing server).
  
  Thus, these two bases of data, data from phase one and the other a direct duplicate of these data used in a training environment where change will not be being reported should, however, be able to exist peacefully should they not? The same version of the same software to access the same data from the server, just an another database, should not be a problem with my limited knowledge of the Oracle! There are still connections in the environment of training may 5 at the time, and the server must be able to manage currently twice more than the logged in users as is the maximum current (edit: expected) load.
  
  I know that this would not be a problem with MySQL or MS SQL and Oracle is a superior database package, then someone can think any legitimate reason that can back up the assertion that having this duplicate database will be a problem?
  
  Thanks in advance for any guidance here!

  It is certainly possible to create a second instance of the database on the same server as your production system. We have several servers with multiple instances. If you follow this path, there are a few things that you should keep in mind.

  Every Oracle instance must have little memory assigned from the RAM server to host the CMS, PGA and other process oracle. Each instance must have sufficient disk space to accommodate files data temporary tablespace, rollback segments etc. Depending on how you plan to implement your training environment, this could potentially be equal to your production environment memory requirements and the disc. If you plan to have a smaller subset of data for purposes of training, then you could probably get with much less than your environment of production.

  Another possibility would be to create another schema in the database of existing production to use for training purposes. While this would need less additional memory and space drive that uttering a completely separate database, it could have an impact on your production system, since the training environment would be sharing resources with the production.

  None of these scenarios would need additional licenses to Oracle (assuming that you have either licensed CPU, or that production and training combined have fewer users you have named user licenses).

  John

• Problem with sending a fax to network folder

  I have a HP 8500 Office Jet Pro, 910g hooked to my wireless network.  I configured the printer to send faxes received to a network on my computer folder, and not to print a paper copy.  However, the printer saves only the first page of the fax in the folder and the other pages do not appear in the file.

  My computer is running Windows Vista Home Edition 32-bit. I don't get the error messages.

  Someone knows how to fix this? or is it how the HP digital fax?

  Thanks, Jim

  Hi Jim,.

  The fax is received as a TIF format and more likely to contain pages, but not just any TIFF reader supports multi-Tiff files.

  Make sure you have opened the file using the Windows Photo Viewer supporting multi-Tiff, if it does not open the default file you can click with the right button on the file and select the program from the open with menu.

  Please let me know if that can solve the problem that you are facing.

  Shlomi

• Elitepad 900 problems with wi - fi - limited connectivity networks

  Just bought the Elitepad 900 32 GB, Win 8 Pro 32-bit.

  I have a problem connecting to my network wi - fi. It is an open network - anyone can connect; I managed to connect my smartphone Galaxy S2 with no problems.

  Once the connection is established, I receive a "limited connectivity" and not internet access. When I 'fix' the network connection I get some more connected time and then it happens again.

  The diagnoses that presents 'repair the network connection' is: predefined lack gateway and bad IP configuration (I think that - because the language of my pc is not English).

  I installed the latest drivers running the .exe directly (as an administrator) and also the Softpack Manager.

  The problem remains.

  Also, when I use the Softpack allways get an error... it telling me that there is a new version available.

  Has anyone ran into this problem?

  Thank you

  Best regards

  Diogo Assunção

  After struggling around this problem, after most of the suggestions that you left, update to the latest released HP wi - fi driver, change the power adapter settings, rolling back to previous versions of drivers...
  I decided to google for Qualcomm instead of HP drivers.
  I found this one: http://drivers.downloadatoz.com/vendor_atheros_type_network-card/415775, atheros-ar6004-wifi-adapter-3-7-0-206/

  Then, I uninstalled the device in Device Manager, rebooted, looked for new devices and used the driver that I downloaded.

  He worked for longer than ever before. Updates in the next few days.

  Thank you all for your answers
  Best regards
  Diogo

• I had problem with the server's shared network folder to my laptop

  I had connected to my laptop network but the problem is that ion for the shared folder server data network didn't show my laptop but show my office so can any one please help me

  Hello Maury,

  Welcome to the Microsoft Community Forum.

  To better understand the issue and to get to the root of the problem, I should be answering this question.

  These computers are connected to the domain network?

  If Yes, then the question you posted would be better suited in the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• possible problem with update dry?

  Yesterday I downloaded updates v 9.0.2 2015 005 security update and Safari on my laptop OSX Yosemite (v10.10.5), and now, iTunes won't play of the TV shows that I bought and downloaded in my library.  Any purchased music will play well.  This seems to affect only my videos.  Maybe this related to updates?  If so, how can I fix it?  All videos were playing yesterday while I downloaded updates.

  I have the same problem.  On the phone with Apple support now.   Given that 5 others have the same issue, looks like it's true.

• problem with cisco DPC-3010 USB network connection

  Today, I received the new Cisco DPC-3010 of Charter. I plugged everything and together with my router, that everything works, but when I tried to use the USB Modem have windows says that it is an unknown device. I have installed and reinstalled the drivers, powercycled the modem and restarted the computer, but nothing works.

  Hello

  If the problem is specific to the unit then, I suggest you to contact the manufacturer of the device for the best assistance.

  http://www.Cisco.com/Web/consumer/support/index.html