Possible repaint problem

Similar Questions

• Repaint problems with 4.0.2.15

  Hello

  After the passage of 3.2.20.09 to 4.0.2.15, I have a problem with the window repaint: at some point (in this case ramdomly) when I change to another application (IE internet Explorer) and then I go back to sql ADNxtc appears that shponkah results. The worksheet is gone, the login window has disappeared, the menu went etc...

  If I move the mouse on the screen, when I go to the menu then it appers, so it seems even some repaint problem (not sure about that).

  In any case, is difficult to work like that because I have to select the text on the sheet or mouse over all the sqldeveloper window to see again all the things. Finally, I have to close and reopen the sql developer...

  I tried with different jdk and various customer Oracle (due to some advice read the net).

  Can you help me?

  Windows 7 64 pro.

  8 GB RAM

  sqldeveloper (64 bit version)

  JDK 1.7.0_55 (64 bit version)

  Oracle customer 12.1.0.1 (64 bit version)

  PD: Sorry for my English por...

  So, it seems that all is well with the memory and the JVM.  Strange that in your previous posts the problem manifests only after hours, but now quickly fires.

  From scratch, after having eliminated the memory as the culprit, the standard advice when the user interface behaves badly are to try to rename or to delete the following folders, and then restart SQL Developer, jumping on the stage of migration of user settings...

  1 %APPDATA%\SQL Developer\system4.0.2.15.21

  2 %APPDATA%\sqldeveloper

  If this does not help, then you can check on other environmental as factors...

  1. is your site updated to the latest version available video device driver?

  2 have you installed third-party extensions that could be the cause?

  In addition, you can also try to collect debugging information as stated in the blog of Jeff:

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  Best wishes

  Gary

• Questions about circuit RC phase difference (possible timing problem)

  Hello

  Here is the program that I use to measure the phase difference in an RC circuit. Simply generate a sine wave of 2 kHz in LabView and send it to the circuit using an analog output. Then I measure the exit sinusoid using an analog output. I also measure using n oscilliscope. I can clearly measure the difference in phase with the oscilliscope and know that it is about 1.4 radians.

  Problems with the program:
  Phase difference different measured each time the program is run for the circuit. It is never as good.

  Possible causes:

  You will notice by looking at the vi that I measure the phase from the signal generator. Can I use a second analog input to measure the sine wave, as it came out at the beginning of the circuit?

  I think it's a timing issue. While the phase difference is constant each time the program varies each track. So the time that each measurement of tone starts its first measure seems to be different every time and causes this reading of different phase.

  The card that I use is a PCI-6221, is there a timing problem associated with switch for input and output audio acquistion or are they separated.

  Is anyway to ensure that two key measures measure phase at the same point in the (real) time?

  I would really advice or changes to the program - could someone offer me (I am a student and LabVIEW is not on our program so I have no support, but I use it for my project (OH!))

  I would certainly acquire two signals.  Food for the analog output right back into an analog input, then your signals filtered in another.

  Initially, I would feed the two analog inputs of the analog output and measure the delay in phase due to the multiplexed A/D on map.  Once you have this measure, you can feed in the filtered signal and then measure the difference of phase of this signal.

• Possible redirection problem - Google redirect spy

  My Hotmail emails are no longer visible.  My research is rediredted to an offer to sign up for Hotmail sweeping. I beleve I have the Google redirect spy but I donlt know how get rid of it. I use Windows 7

  Hello

  You don't specify your Windows version, so the underside is mainly for Windows 7 - Vista is very similar.
  Use EXECUTE instead of start - search for XP.

  -----------------

  Check these:

  IE8 redirect problems - possible Causes and fix the redirect problem
  http://www.brighthub.com/computing/Windows-platform/articles/60039.aspx

  http://EzineArticles.com/?Google-redirect-virus-fix---how-to-get-rid-of-Google-virus&ID=2450094

  http://ask.MetaFilter.com/100853/Oh-that-nasty-Google-redirecting-virus

  http://www.GeeksToGo.com/forum/how-to-fix-Google-redirects-t267407.html

  ------------------------------------------------

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java still
  installs and it causes problems - you never update Java to go back in and turn it off again). Look for other
  possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask to
  It's here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run.
  not all are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Also get Malwarebytes - free - use as scanner only.
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  =========================================
  =========================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
  See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
  see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A60 - possible ram problem

  I have a satellite a60 he says he has 256 RAM. on aol checking my computer tells me that I have only 192 RAM anyone any idea, what the problem might be?

  [Edited by: admin on 22 May 05 20:28]

  Hello

  I suspect that your RAM is shared with your graphics (usually 64 MB) so even if you actually 256 MB RAM, 64 MB is pré-alloué graphics use 192 MB. Your computer AOL chack reports available rather than the actual RAM RAM

  HTH

• Mac works oddly, possible virus problem

  Now, this might be a bit long, but I want to explain my situation: my Mac version is 10.6.8 and I have Windows Bootcamp that divides my 500 gbs equally between the two parties. I use only 20,99 gbs on the side of my Mac and I have only a few applications I've downloaded myself (Chrome, two games (OFF and Minecraft which has a few mods), the Unarchiver and Adobe programs such as Photoshop and Flash). However, I have more (I removed) Safari and Garage Band. The reason why I deleted the Safari is because it does not block the dangerous ads. It is an ad ' Web Cam S *' that I met on a fake Wikipedia who made fun of Youtubers (forget the name of it and never come back to it) which forced me close my Mac because it will turn off and an announcement on YouTube who wanted to use 5 mbs of my data (I stopped my Mac new cause he kept asking when I was denied several times). I can't remember anything for download, but I don't know how to work the virus. This return all happened in August 2015, but since December 2015, my Mac fan started running loudly when he wakes fashion 'sleep' with any of the applications that are running. My Mac also gets is more cool as it allows when it is in "standby". I don't know if it's advertising or there is something wrong with my Mac internally (son, dusty in bulk). Six years ago, but it still load the Web pages and applications as it allows before the ads. Thanks for this reading, I was not able to find an answer that has cured my problems. PS: I don't want to download apps 'useful '.

  I understand how you feel when you say that you do not want to download useful applications.   I'm guessing that is probably based on the experience gained.   However, there is an application that we use here and is generally well regarded by members.   Please download and run and publish the results as a response here.

  It will not immediately solve your problems, but it will allow us to evaluate your machine and recommend a plan of action.    The fact is, there are too many alternatives for us to guess what your problem, go inside your machine.   What will be shown will not include anything private or potentially dangerous; only technical facts.

  Scroll down to the download.      http://etrecheck.com/

  With respect,

  71

• HP laptop Pavilion 17-e040us - Possible fan problem

  Hi all.  I think I have a fan problem.  The fan seems to run all the time... at least for the past 3 or raining days, but not fort, with air alternating hot and cold, of the events.  I looked at the events surrounding the outside of the computer and it does not seem to show the accumulation of dust... but even with appropriate glasses, I'm not able to see if there is dust or not... is old or in my case being old causes sight problems!  I also used the diagnostic software to see if any hardware has failed.  The results showed that the computer hardware is correct.

  Then you clean the vents (the article says that it is acceptable to use a hair dryer)?  In addition, open the back cover of the laptop to clean the fan inside if it has dust?

  Article also says to turn off the computer and unplug the power adapter before spraying compressed air.  Also if you use a blow dryer on the cool setting?  If so, what is the power adapter and how to disconnect it?

  Right now I am using the wired option.  I just need to remove the power cord at the back of the router to disconnect.  However, then the computer is wireless... How to turn off the wireless feature... so I can clean the fan/vents?

  Thank you.  I really don't miss my XP version!

  By blowing air through the vents of your laptop, you are forcing air through the fan. In a laptop, this remove most of the dirt and allow for better air circulation and cooling. This isn't the case with a desktop computer and that's why the video demostates office clean the fan.

  I suggest removing the battery is because with it in place, you can accidentally turn on the computer. With the sector/charger adapter unplugged and the battery removed, there is no chance of the computer starts.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• HP Pavilion 15 Possible network problem

  Bought a Hp Pavilion 15-2513 p original supplied with Windows 8.1

  However, I noticed that when I plug in an ethernet cable and perform a speedtest, speeds are massively a bottleneck. I think it's a driver issue, but I don't know which driver to use. I went to the Device Manager and noticed that the laptop has problems with Bluetooth and an unknown PCI device.

  I also know of the network components is a PCI device so it could be related. A few tips on which driver should I use?

  I have attached a screenshot of the Device Manager to help:

  

  Hello:

  If you have installed windows 7 you need these drivers...

  Last one for the wireless...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_131223_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Bluetooth (Bluetooth driver):

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI device: you want the first driver on the list...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Ethernet: Download and install the 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  None of these devices that need drivers should have an effect on the performance of the ethernet cards / wireless.

  The only thing that can help is the new wireless driver.

  If it makes not a difference, then I don't know what could be the problem.

• All computers on a network cannot browse a specific external site - Possible DNS problem?

  Hi all

  The categories are too vague hope so I'm in the right forum... I have IE8, Windows 2008 R2, Question of DNS...

  We migrated from Windows 2000 to a Windows 2008 R2 domain 2 months ago. There has not been all problem reports since then and I'm to understand that all of their sites they are functioning normally, have been finding work subsequently... Now, the strangest thing is that all the sites that they want to go to all work properly with the exception of this specific site (www dot careerbuilderdotcom) so far.

  Checked the PING WWWdotCAREERBUILDERdotCOM

  (in case of failure may be due to the blocked ICMP) several computers and it does solve one of their IPS (208.82.7.50), indicating the DNS works and solve correctly... Tested accessing this site in particular, many computers and fails this site only. Tested also the computers outside the network to access the site in question and that they can browse correctly indicating that this is NOT the site...

  Checked entered DNS and restart the DNS service without result. Does DNSFLUSH on all of the computers in question and are still unable to access this site.

  It seems not to be a DNS issue. Can anyone provide additional lighting at the entrance and knowledge to solve this problem?

  Hello DASNetSys1

  If the suggestions provided by Ing. Ladislav Cermak do not solve your problem then please return the question in the Windows Server forum from the link below. Thank you.

  http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Java has stopped working. possible configuration problem

  My java stopped working Saturday.
  I tried to uninstall and reinstall. someone said that my being, I got hacked and there is no way to fix it. I think that configuration is mess up I can't even install updates window. Not sure how to restore my configurations then that I can get back operational. I uninstall java on Monday and I still try to reinstall. any help would be great. Thank you.

  Hello

  1. at the outset, what was the exact error message?

  2. what happens when you try to install Java?

  3. what exactly happens when you try to install updates via Windows updates?

  4. What is the name of the updates that fail to install (and the code number and the message KB)?

  5. are you aware of any changes made to the computer, before the show?

  Given that you have uninstalled Java, download and install the latest version of Java available when the computer is on a clean boot.

  Step 1: Clean boot.

  Perform a clean boot on your computer.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: Download and install the latest version of Java on your computer.

  http://Java.com/en/download/index.jsp

  For issues related to Windows Update, please respond with more information.

• I lost all ability to do things, possible permissions problem in Vista

  I lost all ability to do things that I use to type my administrator password for. I think that some permisssions is changed could start it. any suggestions?

  * original title - I have ' administrator password - permisssions *.

  Hi scottkobold

   

  1 have. what changes you done recently on the computer?

  2 are you facing problems with programs that need administrator access?
  3. have you made changes to user account control settings?

   

  Please refer to the below links and check if changing the behavior of the UAC message settings helps you resolve the issue.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-change-the-behavior-of-the-user-account-control-message

  http://Windows.Microsoft.com/en-us/Windows-Vista/your-permission-please-understanding-user-account-control-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-user-account-control

   

  I hope this helps.

• possible power problem

  Hello

  I have a desktop HP Pavilion 7865 has started to give me some power problems.  I followed the troubleshooting steps to

  http://support.HP.com/us-en/document/bph06788#n414

  The first time it's happened that I noticed that the power light little would go as I connect the power cord to the back of the unit.  But the little green light and then returned.  After some tests, the power light remained on and I was able to turn on the pc.  However, it started again this morning so I finally took my monitor power cord and used this one to connect the power supply to the back of the computer and to a power outlet and it works.  I plug the pc power cord into the monitor and my monitor works too so I don't know if it is or is not the power cord, but I'll go out and get a new one and see if that solves all my problems.

  However, my question is this... If the problem is with the power supply that I plug in can be replaced?  If so, it is something I can do myself or should I consider somewhere to do?  Also, if I need to replace the power supply and I can do it, how can I know what type of replacement power supply unit power I need to get and are there any other cables that I also need?

  Thank you so much for all your help.

  The information I found States 7865 HP is a Win98ME around 2001. The stock PSU is a Bestec 200W.

  Form factor is Micro ATX PS3. Here's a picture: http://www.911forpcs.com/7865.html

  If your going to replace the power supply, you must perform steps. I found a contradiction Newegg.

  Micro ATX

  http://www.Newegg.com/product/product.aspx?item=N82E16817338031

  http://www.Newegg.com/product/product.aspx?item=N82E16817104113

  PS3

  http://www.Newegg.com/product/product.aspx?item=N82E16817338005&cm_re=ps3_power_supply_replacement-_-17-338-005-_-product

• After Effects will not be rendered full resolution - possible RAM problem?

  Not sure if this has ever imagined before - I can't return after that effects and RAM preview the half res. When I try and RAM the comp preview just goes black and when I send it to render I get the following message:

  After effects WARNING: connected to a single error - 'error made while writing to the file. An output module is not. The file is maybe damaged or corrupted(-1610153464).

  I am able to correct half res preview RAM and can thus make half res. I tried with several images simultaneously rendering on and outside, empty the disk cache and turn off all RAM hogging the effects.

  An obvious cause, I've identified is that I recently upgraded and replaced the RAM on my computer, however, after effects has been the only software made. Cinema 4 d makes no problem and I had no other problems with the general operation of my machine.

  Were already there before instances of After Effects doesn't work only with certain types of RAM?

  My set up-

  Mac Pro - early 2008

  OSX Mavericks 20.9.2

  2 x 2.8 Ghz Quad - Core Intel Xeon

  16 GB 800 MHz DDR2 FB-DIMM

  Samsung 250GB SSD

  Just another check through everything and it seems that I was not quite be enough depth. Thought I had checked through each effect, each turn off systematically, but I must have missed one. Seems that although frischluft DOF is to blame - he was using with my 3D rendering and passes as soon as I turn off the layer AE renders perfectly. Duh! Think I must have been concerned with the RAM I had just installed and lack of the most obvious causes making.

  Quite relieved that I can make out AE now well that's a bit of a pain I can't use DOF frischluft. For this purpose known to cause problems in the past? I've used in some companies different and never had any problems with it so far. Maybe I need to upgrade to the latest version?

• Have a calendar of upgrade and platform possible permutation problem

  I currently have CS4 Standard Design Creative Suite installed on my laptop only (PC) I need to move to CS6 before December 31.  However, I bought an iMac before next spring on which I need to have the new CS6 installed update (for Mac, of course).

  This causes me a headache because I don't want to pay for an upgrade at the time on my PC in order to keep my privilege to upgrade and having to pay again for a new full version when I get my iMac, taking into account the fact that the standard license technically allows me to install the software on my laptop and my desktop computer as long as I do not use them at the same time.

  I searched the web a lot and came across the post below in a forum.  Can you tell me if this is possible or not, because that would be the ideal solution for me!

  "Upgrading to CS6 on your PC and then apply for a switch of platform OK from Adobe, that can take 2 days or 2 weeks - all depends on and their processes changes each time I have it try."

  In the meantime the CS6 for Mac, you can continue to use the CS6 on the PC. After making the switch, you can continue to use CS5 on the PC, because it's a legal license, but you must agree to stop using the CS6 on the PC (and sign a statement to that effect) when you make the switch to the Mac. »

  Or can I simply by upgrading now, with the swap for Mac option, but wait until I get my new Mac to install it, while leaving my old CS4 working on my laptop computer?

  Thanks for any help you can provide!

  Thank you Jeff and sorry for my outburst.

  I subscribed just to the cloud.  It is cross-platform and allows me to do what is described above, although I will not need half of what there is inside and in the long term, it will get more expensive.  But hey, it's still cheaper than buying two licenses of Creative Suite.

  Thank you for your help,

  Johanne