Possible to use Lan and Wifi laptop computer with VMWare?
I have a laptop Dell D630 running Windows 7 as the host operating system. Normally if you use wifi and you plug a cable lan wifi disconnects because the laptop uses the connection with higher bandwidth.
Is it possible to have the laptop direct is the entrance the guest operating system on lan and wifi running for the host operating system? In this scenario, the guest operating system could have total control on the lan input and it would not need to be accessible by the host operating system.
Thank you!
I have no problem to use Ethernet and WiFi adapters at the same time on any of my notebooks including Dell.
If you want to isolate virtual machines to be filled to the Ethernet adapter on the host computer and do not have the host use simultaneously then proceed as follows:
In the value the target adapter VMnet0 virtual network Editor.
Then on the dialog box properties of the adapter to the target on the host computer uncheck everything except VMware Bridge Protocol.
Now with the guest on Bridged they connect to the physical LAN while the host will be able to use the WiFi adapter to communicate with the physical LAN.
Tags: VMware
Similar Questions
-
I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?
If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.
As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.
At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it. We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.
-
Laptop says that I am not connected to the internet when in fact I am. The LAN and WiFi
I recently acquired a laptop HP ProBook 4540 s. It is currently running Windows 7 Pro 64 bit.
Although I seem to have full connectivity with internet through two LAN and WiFi, the icon on the taskbar always has a red
'X' through it.When I go to the network sharing Center, there is no listed active networks and yet it shows fully connected at the top of the page.
Because there is no active networks listed I can't change of 'Private' to 'Home' or 'Office '.
Also, I do not believe that the computer running automatic 'windows updates' because he thinks that there is no internet connectivity.
It can search and identify the 'local' WiFi routers and I can connect to them with ease, but the laptop still says: I am not connected.
I tried a lot of things. New drivers, uninstaller and reinstall, Hard reset and many other suggestions I found on the internet without success.
I hope that someone out there has seen this particular problem.
Thank you
Hello Rick,
Thanks for posting your question on the Microsoft community.
Thank you for details on the question and your efforts to resolve.
This problem may occur because of corrupted network driver or incorrect network settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check.
Reference:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7Convenience store network in Windows 7 provides a way for anyone diagnose and fix network problems. The problem may be caused by a number of problems with your computer, the web server or the network between your computer and the web server.
If this does not help, use method 2.
Method 2:
Reset TCP/IP and check the issue.
Refer to this article:
How to reset TCP/IP using the NetShell utility
https://support.Microsoft.com/en-us/KB/299357I hope this information helps.
Please let us know if you need more help.
Thank you
-
DV6 - 2173cl: what the drivers of network adapter for LAN and WiFi for HP dv6 - 2173cl
Hello
I have reinstall my drivers for the computer hp laptop dv6 - 2173cl. This laptop has LAN and WiFi cards. I looked at the driver for this model and I see that for drivers WIFI HP has:
Available drivers Atheros and Broadcom.I let Windows Update and it installed an Intel WiFi Link driver which is not yet on the Internet HP site. I have
Do I need to install Atheros or Boardcom WiFi driver for this model? I'm afraid that, perhaps, the Intel driver is a generic driver that makes the card works but is not optimizing his performance as do dedicated pilots.
How do I know what brand for the wifi card I have?
Thank you
You are the very welcome.
You need the JMicron card reader driver for your model.
You don't need the driver of Intel Matrix Storage manager.
The Intel matrix storage driver manager is used for disk raid configurations.
I couldn't find a W7 driver for your Intel card. The site is down or they can't stand any more of the map.
It states right they do not provide phone, chat or emal support for this card.
So here is the latest driver I could find at HP.
If it is newer that what update of windows installed, then you can install it.
15.0 (February 14, 2012)
-
Windows 7 BSOD when changing between LAN and Wifi network
I have users to get BSODs during network between LAN and Wifi. There is not much information in the dump file.
Any idea what could be causing this BSOD, and what can be done to correct?
I can send the dump file if anyone is interested in looking at.
Thank you
Manish
Hello
1st thing I would do is update the card interface (wired) NETWORK and WiFI (wireless) drivers.
Suspect also any 3rd party antivirus. Uninstall it and use MSE - free at least test.
List of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146MSE - free
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201============================================================
Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) to in a
second or so time of the BSOD to provide more information as possible
cause: see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hello
I have an Adobe CC 2015 subscription on my desktop, is it possible to use it on my laptop?
Thanks
Bruno
Hello
Yes you can.
CC Adobe license can be activated on 2 machines using the same Adobe ID.
Reference: licenses and terms of use | Adobe
Kind regards
Sheena
-
Every Pc has yellow ball on the NIC (LAN and WIFI)
All client computers obtained yellow ball in the NIC (LAN and Wifi) after running GPUPDATE/force on domain controller.
I've run the gpupdate and all afftected users once again, also
account has been removed from the ACL of the directory.I am the admin of our small network and have never needed to play with the
GPO before. This problem just happened 'out of the blue"and I would like to
to resolve what caused it.This issue is beyond the scope of this site and must be placed on Technet or MSDN -
Hello
I recently bought a laptop computer with a trashed hard disk. I have the product key for the Windows XP Home Edition, which accompanies it originally but do not have the factory reset CD. Is is possible that I can download the Microsoft operating system that I can activate with my product key?
Thank you!
N ° there is nowhere to download XP. Why not contact the seller to see if they can replace the CD? If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
My Blog -
My husband has a laptop computer with windows 8 and I have a laptop with windows 7, we can share each other files or photos. Is there a way to share our files and images? What is the problem is two different windows before carpet?
Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared
You should be able to share files between Windows 8 and Windows 7 very well.
Walk through the following article to get your network configured properly.
http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help
-
I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?
Hi Kelly,
Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.
Activating the license on any other machine, please select the option to disconnect all other devices and try again.
Reference: connect and disconnect activate Cloud Creative applications (deactivated)
Kind regards
Sheena
-
I can't find Microsoft Paint app in HP-2000-2b19wm laptop computer with windows 8.1
I don't find Microsoft Paint app in HP-2000-2b19wm laptop computer with windows 8.1. I search in my C drive, and I offer files, which, when I opened the say I try to open a file of type "file system" (.dll) and then he offers me the store and word and other places to select to open the file, but when I select one of those, the file is still not there for me to open and use. Please help me find this file.
Thank you.
Hello
Please try:
- Hold down the Windows key and press Q
- Painting in the Find box to anywhere
You can locate paint from there, and you can "pin" in the taskbar.
Kind regards.
-
Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10. the same code that is delivered on paper when I bought adobe
Creative cloud does not use a serial number and creative cloud subscribers for not having any serial number associated with their programs. Creative cloud subscribers use their adobe ID to activate their programs.
Download and install the desktop creative cloud application (after signing with your adobe - the same as that used to pay for your creative cloud subscription ID), https://creative.adobe.com/products/creative-cloud
Open the office application (a shortcut will be on your desktop) > click applications, and then select the programs you want to install.
the desktop application gives you access to the cs6, cc, cc 2014 and cc 2015 apps. and probably more in the future.
If you already have the cc desktop application and you need to update your adobe id, log out and then back to your client application using the adobe id to pay for your subscription in cc: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-
is it possible to use my pdc3070 (camera digital polaroid) with vista? It seems to be ok with windows 7.
Hi James,
(1) what exactly happens when you try to use your camera?
(2) that you get an error message that you receive?
Please provide the exact model of your device number.
Method 1: Run the fixit available in the link below
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2: Check for any error message in Device Manager
When a device is not functioning, Device Manager also typically displays an error message with an error code that comes with it. First, search for errors in the Manager of devices to do this, follow the steps below:
(a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.
(b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) in Device Manager, look for the camera and then double-click the device name.
(d) If an error code has been generated, the code appears in the status area of the device under the general tab
-
I bought a laptop computer with non-genuine windows 7. I have the original windows xp product key pro, etc. from the bottom of the laptop, but I do not have the windows xp pro cd. Help me, please!
You will need to either buy a version authentic retail Windows XP, with its key sales, to a true scource or visit the site of laptop manufacturers, support for your model and see what versions of win are taken care of, then buy a commercial version of this o/s.
The key on the base of the laptop is the recovery key that requires that the recovery disks provided by the manufacturer.
You could phone manufacturers to support to see if they have the origonal recovery cd send you, for which it maybe a small fee.
-
Is it possible to use Video Phone (Cirrus Sample Application) with FMS4?
Hello
could someone explain to me please, is possible to use Video Phone (Cirrus Sample Application) with FMS4?
It seems to be possible as the video source are these text:
RTMFP (Adobe Cirrus or FMS) server address
[Bindable] private var connectUrl:String = "rtmfp://p2p.rtmfp.net";If possible, where you will find a script server to FMS/opt/adobe/fms/applications/videophone/folder?
Sorry for the bad English
Thank you very much!the last VideoPhoneLabs uses a new feature of relay short messages on Codename Cirrus. the semantics is super simple and there is no reason that you could not implement the feature on FMS4.
the relay function works like this: when peerID a01234... wants to send a short message to peerID b12345... (both connected to Cirrus), peerID... a01234
NC is the NetConnection
NC. Call ("Relay", null, "b12345...",... args...);
the message will come out as a call to the function onRelay of the customer in the NetConnection on b12345:
nc.client.onRelay ("a01234...",... args...)
VideoPhoneLabs uses this function to the call signaling. You should be able to concoct a similar function on the side server for FMS4.
Otherwise, other that the URI that you use to connect to SGF, the introduction of P2P on FMS function should be identical to Cirrus.
Maybe you are looking for
-
Move the tab bar to below the address bar?
Hello I just upgraded to FF4, and now the tab bar is just up the top of FF. In my previous version (3.6.something), it was above the web page area, below the address bar. I can move it to the bottom? I find this disconcerting whether if far away page
-
Solution for "Spooler service does not" with printers HP F4480 all-in-one.
If you receive the prompt that says: "cannot install or print due to 'queue service does not work', here is a simple solution.» GO to the start menu and click on 'run '. Type CMD, and then click OK Type in the box that appears, "net start spooler" an
-
Error 0x80071AC3: the operation is not successful because the volume is dirty
I have just reformatted my hard drive... 500 GB of Buffalobut after that, I tried to move files on the hard drive and I got the error code.How can I solve this problem?
-
is - this windows 7 home 64 bit preium contain more than 3.25 GB memory to od?
Windows 7home premium 64 bit supports more than 3.25 GB of memory? I have 8 GB of memory in my computer. The BIOS recognizes 8 GB, but windows never sees more than 3.25 GB.
-
I can't install after effects on my windows
When I get to the adobe Web site, he says that they are not available now and try later