Power alerts

Similar Questions

• Low power alerts

  I can't find a way to create an alert sound and Visual, to tell me that my phone is a low power (and should be stopped in a controlled manner). Please can someone tell me how to do this.
  Thank you
  Julian

  Th software should come with the manufacturer of your laptop. Let me know the model of your laptop. Contact me for windows OS and Malware MSN c_6ramal hotmail com

• Questions, received power alert email, everything seems in good condition, never had any good email

  We had a blip/surge power this morning on the stream for one of the streams in our building of our redundant server power.  I received two warnings this morning via email for my table EQL, but never received emails telling me they were ok.  I physically inspected the table, and there is no warning light on.  What's he do not send emails Okay everything is?

  -----------------------------------------

  Storage table member1 warning event

  subsystem: SP

  event: 28.3.85

  time: Fri Aug
  16 07:15:44 2013

  Cooling power
  module 1 is enabled disabled or does not power on.

  -----------------------------------------

  Storage table member1 warning event

  subsystem: SP

  event: 28.3.51

  time: Fri Aug
  16 07:15:44 2013

  Animal health of warning conditions exist.

  Correct these
  conditions before they affect the operation of the table.

  Power supply
  failure.

  There are 1
  animal health outstanding conditions. Correct the situation until they affect
  table operation.

  Hello

  EQL table does not send an alert follow-up when the condition is resolved.

  Kind regards

• Pavilion dv6: power problem

  I am using hp pavilion dv6-7135nr. Need a power supply problem, when I run the hp battery test it shows ok status but when I plug the power, he died. battery is not at all, but now it shows 80% at first but after more then 10 days, it's 50%, I observed a problem with my mechine befor this load problem he suddenlt remove power from the battery when it cut down to 25%. and even I put its low power alerts but is suddenly off my mechine. Please guide me on this problem

  Problem solved, it was a battery issue, I just replaced battery and it works fine. infect the Hp need to improve he essement battery hp software.

• ESX possible powerdown of VIMA?

  OK, since your very helpful responses yesterday (http://communities.vmware.com/message/1252435#1252435), my colleague and I have installed VIMA on our server. VMware Infrastructure Client is open and localhost.localdomain, I can start and stop VIMA and a Machine virtual Linux Fedora 8.

  We also tested software from Tripp Lite PowerAlert Local (PAL) installed to VIMA, using an internal release candidate. The inverter I have connected right now is just connected via the serial port only on the unit. My VMware Infrastructure Client does not give me the option to add a USB to VIMA, so I can't connect a UPS in this way. Monday or Tuesday, we'll probably also test our power alert Shutdown Agent + SNMP Webcard combination as well. Is there a good reason why users will not want to consider plugging an inverter via the connection in series on the server?

  I added William Lam on VIMA scripts, and I'm under the upsVIShutdown.pl of the command line. It works at the first stop, my Linux Fedora 8 VM and then my VIMA, but the area of the ESX Server is never extinguished. Should I wait that the ESX Server will shut down when the script is run from VIMA? Scripts are usually installed on the ESX console or VIMA? I guess I'm missing something about the whole box of VIMA turned off after that virtual machines are off safely.

  Thank you

  Xochitl Lunde-Monzón

  Tripp Lite Software Engineer

  So, it seems you have still some problems resolution with the displayname property of the so-called really your VM VIMA.

  First of all, lets check the host or / IP you added your_ESXi_ host in VIMA, you can check by doing the following:

  [vi-admin@vima ~]$ sudo vifp listservers
  Password:
  himalaya.primp-industries.com
  

  You should get back your ESXi host, now if you do, I want that you do the following:

  [vi-admin@vima ~]$ vifpinit himalaya.primp-industries.com
  

  again, replace everything that was of the first command to see if vifpinit run and make sure that no error occurs. If it's good so far, then I want you to run the following command:

   /usr/lib/vmware-viperl/apps/vm/vminfo.pl --server himalaya.primp-industries.com | grep Name
  

  This will display the VM (s) currently residing on your ESXi host and provide you with the displayName, which is the same name you'd see in the VI Client.

  I suspect that you have just a bad reputation somewhere on what you think, is the real name which is actually stored.

  You can also correct the problem where the host is "localhost" by going to configuration of the host-> DNS and routing and make sure that all the information is configured correctly

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Alert: "State of connection and power supply home" on vcenter 5.1.0

  Alert | : connection and power host on Vcenter 5.1.0 and Exi 5.1.0 State trigger will does not but its execution such as available on direct access to esxi.

  This Aler trigger automatically after you again 'to connect to this host.

  Please help me solve problem

  Be sure to vCenter Server is able to resolve the host name and vice versa. Add a host record - A with the IP address of your host (which btw. is always visible on your screen) to your DNS server and you connect to the host by its FULL domain name, rather than by its IP address.

  André

• VMware esxi 4, 1-tensiond ' AClost power - state alert

  BOM dia pessoal,

  Dell VMware ESXi 4.1 of em um DELL T410 custom EU instalei o, a reference

  ABA na do servidor appears uma mensagem of attentive State.

  "vmware esxi power AClost - alert state" in accordance with na imagem em annex.

  Poderia ser some driver or modulo as nao carregou?

  Abraços!

  Voce ja verificou also is a melting esta devidamente energizada e running? JA tentou dar um 'reset the sensor?

  Por favor, não don't atribuir os pontos para e resposta 'useful' or 'correta.

  Mauro Bonder - moderator

• Power state alert home connection

  Hola todos,

  Put back in cluster of mi ambiente virtual practicamente todos los tienen esta host alarmed "connecting host and power status" think that era I/O are van varios dias pero mucho y no is como puedo did este problema.

  Saludos,

  Hola Warrenjc:

  Échale a look http://www.jjclements.co.uk/2010/02/17/vsphere-host-disconnects-from-vcenter-host-not-responding/

  Saludos.

  Enviado desde mi iPhone

  El 17/03/2011, a las 16:39, Warrenjc [email protected]<>[email protected]> escribio:

  Http://communities.vmware.com/index.jspaVMware communities >

  Power state alert home connection

  created by Warrenjchttp://communities.vmware.com/people/Warrenjc> in Iberia VMware User Group - see the discussion complete onhttp://communities.vmware.com/message/1718670#1718670

• AC adapter - alert - 'type and power adapter AC power cannot be determined.

  It is a problem common (I see a lot of messages)

  The source of the problem is the AC adapter [Dell].  PA - 21 family, 65 w, P/N: NX061.  It is made in China.

  I have a XPS M1330.  Assistance from Dell after a warranty repair, replaced the motherboard twice, both times to replace the battery, replaced the twice - AC adapter is not fixing it.

  It turns out that the warning of power is very informative.  It says "please connect a Dell 65W adapter or greater for best system performance.  So, I plugged my adapter 95W Dell - WOW, problem solved.

  A laboratory of my new Dell AC adapter 65 test indicates whether 64.6 watts.  If this appliance becomes hot (such as after several hours of use), it can not put on full 65 Watt - the system may not recognize the adapter, it can power the system ok, but will not charge the battery.

  These units burn out after only a few months of use. The cables are too fragile. If Dell or their quality control provider cannot produce a reliable 65W - I found seveal universal adapters "Made In USA".

  Well, my solution was simple.

  I just removed the battery and turned on my laptop. Then I turned off the laptop has replaced the battery and VOILA. The error message disappeared.

• Skype calls incoming alert message when the laptop in power saving mode.

  Original title: incoming calls from Skype

  Is it possible to put my laptop (Toshiba/Vista) in a mode but still saving be audible warned a Skype call?

  It would be best if you contacted Skype support team regarding this issue.

  They are experts in the field of your request and would be in a better position to answer your concerns. You can contact them through this link: https://support.skype.com/en/

  You can also join the community of users here: http://community.skype.com/t5/English/ct-p/English?profile.language=en

• iPhone 6s more don't stop alert sounds

  My 6 s iphone more continues to make sounds to alert even if there is nothing to report. No messages, no emails,

  nothing on the notification Center, without badges.

  I tried to disable notifications, hold the home and power at the same time buttons... nothing seems to work.

  Only the do not disturb button seems to offer a peace of mind.

  I had never experienced this before.

  Everyone know the same question? This could be a bug?

  Any suggestions or advice?

  Thank you in advance.

  PS The problem persists even with the do not disturb button on.

  Usually it's the opposite - people don't get notifications that they should.  The only advice I have is a restart, forced to reboot, restore the backup of the form and finally restore as new - in this order:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

• circumvent the Javascript on Safari alert box

  I visited a site that prompted a third announcer to activate an alert box Javascript asking me to perform a Flash plug-in download. I tried to close the tab without response to the alert, but the alert is persistent and allow me to select useful on Safari options until he is satisfied. It seems that the only way to avoid it is to close the browser session. But when I run Safari, once again, the alert is displayed again. Is there a way to remove this nuisance?

  1. click on the button "stay on the Page.

  Safari > Preferences > Security > Web content:

  Uncheck 'enable JavaScript.

  2. click  in the menu bar and select "force quit."

  In the window that opens, select "Safari" and click "leave power.

  3 restart Safari by holding down the SHIFT key.

  4 safari > Preferences > Security > Web content:

  Again check the box 'enable JavaScript.

  If this does not help:

  Quit Safari.

  Click on an empty space on the desktop to activate the Finder.

  Hold down the option key and click on the "Go" menu in the Finder menu bar.

  Choose 'Library' in the menu dropdown.

  1. Home > library > app state saved > com Apple.Safari.savedState

  Right-click on com Apple.Safari.savedState and choose "move to trash".

  2 home > library > Safari > LastSession.plist

  Right-click on LastSession.plist and choose "move to trash".

  Launch Safari and test.

  Note: A screenshot of the po - pup would have helped.

• Alerts/Notifications however not passed to watch calendar

  I scoured the forums and I have yet to find a clear answer to my problem.

  I get all my phone calendar alerts to my Apple Watch. I have 'mirror iphone' lit. I have notifications on the value in the phone settings. I'm the calendar reminder (alerts) 5, 10, 15 minutes before the event very well on the phone itself, but never pushes at my watch. The phone is not on or unlocked when alerts expected (should) come through.

  I have NO problem get any other phone notification/alerts to look outside the calendar. I use the stick ical app on iphone.

  Any help would be appreciated.

  Hello

  It may help to try these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > calendar > choose custom and turn on all the options available.

  Otherwise, it can help to restart your iPhone and your watch:

  -Turn off the two devices together, and then restart your iPhone first.

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To reactivate: press and hold the side button until you see the Apple logo.

• I upgraded 10.11.4 and all applications that I try to raise the alert that they damaged what happens?

  I upgraded 10.11.4 and after restart of applications I try to raise the alert they are damaged. That is what it is?

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  Then try to launch an application.

  On Safe Mode

• iMac 2010 freezes, restart by only the power button

  My iMac 21 "early 2010 has been a faithful workaholic but has seen better days of course. The last six months, it was completely freeze but with the ability to move the mouse - seems to be getting more frequent. It must be restarted by pressing the power button. Usually, it's when Safari is open and above (in the current window usage), but not always. My Console is reading the following:

  Diagnostic reports to the user (at the time of the freeze)

  21/03/16 1:29:59.772 Safari [330] PM: KeychainGetICDPStatus: key :-25300

  21/03/16 1:29:59.772 Safari [330] PM: KeychainGetICDPStatus: status: power off

  21/03/16 1:30:00.583 PM WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x14a window is not attached to the window 0x14c

  21/03/16 1:30:06.301 PM Safari [330]: making closing tcp_connection_destination_handle_tls_close_notify 602 due to the TLS CLOSE_NOTIFY alert

  21/03/16 1:30:10.696 PM WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x14a window is not attached to the window 0x14c

  21/03/16 com.apple.WebKit.WebContent [365 1:30:13.570 PM]: CoreAnimation: rendering Error 502

  21/03/16 1:30:16.561 PM sandboxd [146]: com.apple.WebKit (365) ([365]) deny mach-search ATS Query Port 477 (by-pid)

  21/03/16 1:30:16.577 PM sandboxd [146]: com.apple.WebKit (365) ([365]) deny mach-search ATS Query Port 477 (by-pid)

  21/03/16 1:30:17.483 Safari [330] PM: KeychainGetICDPStatus: key :-25300

  21/03/16 1:30:17.483 Safari [330] PM: KeychainGetICDPStatus: status: power off

  Diagnostic System (at the time of the freeze) reports

  WindowServer_2016-03-21-133137_Gazzerks - iMac.userspace_watchdog_timeout.spin

  WindowServer_2016-03-21-133145_Gazzerks - iMac.userspace_watchdog_timeout.spin

  WindowServer_2016-03-21-134800_Gazzerks - iMac.wakeups_resource.diag

  The above system diagnostics are always consistent with the gel, with the exception of the following line which appears sometimes (on a former gel):

  VTEncoderXPCService_2016-03-10-075028_Gazzerks - iMac.cpu_resource.diag

  Any help in locating the problem would be greatly appreciated.

  Thank you

  Gazzerk

  If you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.