AC adapter - alert - 'type and power adapter AC power cannot be determined.

Similar Questions

• Inspiron 15R N5110 'type and power adapter AC power cannot be determined.

  I was faced this problem for 2 days now! Yesterday my charger(AC adapter) stopped to load my laptop in all of a sudden so I thought it was just the adapter that stopped working the next day I went and bought another adapter with the same input, and the output power is plugged into my laptop and it started to beep and then he showed me this:

  

  The power adapter is just the same as the original one 90 W as well, but it seems that my system does not detect the card I went to my BIOS, and checked

  The AC adapter type / CC: 'None '.

  Try to order:

  A new adapter Dell OEM AC - if this does not solve the problem,

  Replace the DC Jack:

  >

  -If this does not,

  Replace the motherboard.

• Alert: "State of connection and power supply home" on vcenter 5.1.0

  Alert | : connection and power host on Vcenter 5.1.0 and Exi 5.1.0 State trigger will does not but its execution such as available on direct access to esxi.

  This Aler trigger automatically after you again 'to connect to this host.

  Please help me solve problem

  Be sure to vCenter Server is able to resolve the host name and vice versa. Add a host record - A with the IP address of your host (which btw. is always visible on your screen) to your DNS server and you connect to the host by its FULL domain name, rather than by its IP address.

  André

• Looking for an AC adapter and power cord for a HP Pavilion 2 p-1105, PN:QW819AA. Parts order fiasco.

  Not my computer, but my father, apparently he has lost the power adapter and power cord before he surrendered.

  I have never had a difficult experience find a part, it's like the HP support site is this circular black hole. I understand that this isn't a standard power supply, but HP power cord... Seriously, why the specifications list and the list is not part numbers.

  Call the customer support isn't much better, was routed from the line parts store to the HP Shopping, back to the parts store channel. Each single representative that I spoke too cannot identify this part.

  a guy tried to tell me everything that I needed was a rope, according to the installation instructions, is not correct.

  At this point, I'm extremely frustrated and very unlikely never recommend or buy an HP product again.

  Here are the specifications of the desktop HP Pavilion p2-1105. According to the specifications of the computer, this model requires an external power supply with the following features;

  External 90W power supply (100V-240V)

  Total wattage: 90W

  Input voltage:

  100-127V/3A (50-60 Hz)

  200-240 v/2A (50-60 Hz)

  Output voltage: 19V

  Based on the HP part Surfer parts list for the product number: QW819AA - model name: desktop HP PAVILION P2 - 1105, the following seem to be what you are looking for.

  HP P/N 213349-001 - cord (black) - three sons, 3.0 m (9.8 ft) long - right taken C5 (F) (Canada and United States)
  HP P/N 619752-001 - food - Ext AC Adpt Lolonis-r RT Angle Connector 90W

  HP P/N 695835-001 - 90W square EPS (Domino) 3 p (which seems to be an alternative to the HP P/N 619752-001)

  Please send Bravo

• Error message: "the AC adapter type cannot be determined." when connecting to the CA DELL 90W Adapter

  My power adapter is plugged into my laptop, but it is not the battery.  I could use the computer plugged into it.  The message I get is "AC adapter type cannot be determined.  This is the adapter supplied with the notebook, which is DELL 90W AC adapt, and it is the same type that the message in the dialog box tells me to connect.  I can't what causes this problem.

  Hi Carlie45,

  This can happen due to a faulty adapter. You can try these steps and see if it helps.

  > Connect an AC adapter / CC and the various test.

  > Plug the computer into a different outlet and check.

  You can also check with DELL support for further assistance:

  http://support.Dell.com/

  Hope this information is useful.

• PE 9.0 no sound with video to DV AVI type 2, but the sound is ok with Media Player and Power DVD

  PE 9.0 no sound with video to DV AVI type 2, but the sound is ok with Media Player and Power DVD

  Werner,

  Good news!

  When I install a new video driver, I also go to Realtek, download and install their last too.

  Good luck and happy editing.

  Hunt

  PS - Looks like you can mark this thread as a response. If you need help, please see this article: http://forums.adobe.com/thread/1058744?tstart=0

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• What type of power cable need it for a HP Pavilion TouchSmart Sleekbook 15?

  Title of the Moose - power cord

  What type of power cable need it for a HP Pavilion TouchSmart Sleekbook 15?

  Hello

  Check with the help of HP, their documentation and online in their forums.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Something like this for example:

  http://www.chargerbuy.com/original-HP-sleekbook-15series-AC-adapter-65W-cord.html

  Rob - SpiritX

• Possibility to get a new video card and power supply

  Hey everyone just curious if someone could lend a hand with some questions I have.

  I currently have a HP Pavilion Elite

  Model number: HPE-171f

  OS: Windows 7 64-bit

  
  

  Recently, I was looking around in my computer and I realized that I only have a 460w power supply. From the beginning, I knew I had to get a new power supply if I wanted to update my video card.

  But then I realized that there are a few constraints of size with the case. I was curious if one of the most recent as the GTX 670 Nvidia cards or 660 (when it releases) would fit in this case. With a power supply.

  I know it's an older case so with this question, I was wondering if its even possible/chip just to upgrade the card video and PS.

  Thanks for the help

  
  

  Yes, you can update your map graphics and power for something bigger. The CX500, CX600 Corsair are highly recommended, are favorites of the forum and are known to adapt to most cases of HP. With a length of about 9.5 inches, the graphics card GTX 670 can be tight but feasible in your case... measure along the x 16 PCIe slot and look for potential problems. For more helpful advice, read Guide of Big_Dave of a discrete video card selection .

  Frank

• Adaptec AHA-2940UW card prevents POST and boot 400SC, Precision 390 and Power Edge

  I have two systems: Precision 390 and Power Edge 400SC

  When an Adaptec 2940UW adapter is installed in a machine, they will not start.  Power lights, but there is no video output, the system just hangs.  In the case of the 390, the fan slowly ramps up to its maximum speed.

  I know the SCSI drive and the cable is good and well done.  I tried different machines slot, disabled the startup of the IDE/SATA drives, disable the option "fast boot".  The results are always the same - both computers refuse to do the BIOS POST when the adapter is installed.

  My first is that the adapter is bad, but the eBay seller insists he test it and it worked.

  Anyone have an experience to install a SCSI card in a Dell computer with integrated IDE/SATA controller?

  The 2940UW is a 5v PCI 2.0 card.

  You can use only the 2 cards of keyway UNIVERSAL PCI 2.2 or 2.3 which are 3.3V to the Pentium 4 and systems.  Mounting in the slot is NOT compatibility.  All slots MODERN 64-BIT PCI - X are also 3.3V only.

  If you need this card, you will need to use a 2940U2W which has 2 SLOTS, which means that its 3.3V OR 5V UNIVERSAL

  UEFI WINDOWS 8 systems will prevent this loading card or be seen in secure boot mode.  64-BIT VERSIONS of windows must also be certified by Microsoft WHQL drivers or that they will not load.

  http://www.Adaptec.com/en-us/support/SCSI/Ultra2/AHA-2940U2W/

  

  

• 57nr 6B dv7: what type of power button Board cable I have

  I'm looking for what type of power button Board cable I have I need a new replacement

  Hi @DarknesReasz,

  Thanks for posting HP forums! I read your post and wanted to help.

  I understand that you are looking for a replacement power button Board cable.

  I found below on Page 36 of the Pavilion dv7 Maintenance and Service Guide

  

  You could search the part number on the link of the HP parts store.

  Let me know if theses help to resovle your issue

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Replacement card wireless and power p7-1254

  1. what type and where can I find the exact same as found in the tech specs page in the link below?
  
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5187022&... Also, where can I find this card on the motherboard? I don't see or I could have missed it.
  
  3. Moreover, if I were to upgrade the processor, which will be I need and how to replace the CPU?
  
  4. What is the recommended CPU to run at the same power original power supplied with my computer when I first bought it?
  
  5 How can. one last thing, I upgrade and replace the graphics card if this computer comes with the integrated graphics card of base/stock/default on this computer?
  
  I'm not very tech savy, or a computer programmer/Assistant. Help, please. Thank you!

  This is the original factory specifications for your desktop HP Pavilion p7-1254. Here are the specifications of the card mother AAHD2-HY (Holly) installed on your computer.

  (1) wireless card and its location;

   

  

  (2) CPU upgrades;

  Image AMD A8-3850 (Liano) 100W
  Image AMD A8-3800 (Liano) 65W
  Image AMD A6-3650 (Liano) 100W

  No need to replace the power supply to allow an upgrade of the CPU.

  (3) graph and power upgrade;

  This computer using integrated graphics supported by the motherboard and APU. Installation of a discrete graphics card will automatically disable the integrated graphics card. This model supports a v2.0, v2.1 or card discrete graphics PCIe x 16 v3.0 Specification v2.0. For all but the most basic graphics cards, you will need to supply. I suggest using the power supply Corsair CX500, CX600, CX500M, and CX600M.

  Please see HP - addition / replacement of material and select the appropriate necessary topic for instructions.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• Is there a way to cause (or uncause) your computer to delay while you type. In other words, there is a large gap between when I type and when the characters actually appear.

  My son hit the keyboard and somehow changed the way in which the computer types. There is a long delay before appear it the keys I have tap on the screen. It's a frustrating way to type. Does anyone have an idea if it's a shortcut that I can disable or what other explanation/solution can exist. Thank you.

  Hello

  Power - off wait a few minutes and power on again to allow a full reset.

  There may be a stuck key check so the area where it hit.

  This happens in all such programs as IE, Notepad, WordPad and others?

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• an intermittent failure of screen saver and power off to turn on?

  Hello.

  Win 7 Desktop, unlike my laptop and other computers in Win 7, has a configuration screen saver and power who, sometimes, never active? I have checked the background process and doesn't understand why sometimes it works and other times that I have to reboot to get to kick. It still works after a reboot as long as I'm not using the computer. Sometimes when I use it, the screen saver setting and be able to turn on, sometimes not?

  Has anyone ever heard talk about this? What do you suggest me? Any help is greatly appreciated!

  Thanks a lot for all possible solutions.

  Sincerely,

  Miles

  P.S. I did a SFC/scannow and no problem not found. I also checked my Driver Lan properties to make sure that the box is unchecked to wake the computer.

  P.S.S. My computer is a Windows 7 Pro with an i5 3rd generation Intel 3.10 MHZ CPU with 16 GB of RAM DDR3 and SSD 1 TB hard drive.

  P.S.S.S. All drivers have been updated.

  Hi miles,

  I'm sorry for my late reply.

  You can try to uninstall and reinstall the driver for Inter since the Device Manager.

  1. Press Windows key + R.
  2. Type devmgmt.msc in the space provided, and press ENTER.
  3. Look for the Intel graphics driver installed (under cards.)
  4. Right-click on the Intel driver and click Uninstall.
  5. The option to delete the driver for this devicecheck box.
  6. Click OK and restart the computer.
  7. Reinstall the driver from the link provided in my previous answer.

  Please post back your results for assistance.