Realtek 8191se in Satellite Pro L640 won't see 5 GHz network

Similar Questions

• Satellite Pro L20 won't see WiFi Linksys WAG 354 G

  My L20 don't even see my Wi - Fi point. He can see and connect to Netgear and other (older) Linksys AP but not the WAG 354 G. Other laptops can see the AP. I don't think it's something to do with WEP encryption, because he has yet to see the SSID broadcast which is on. I can't update the Linksys to any newer firmware and 5005 G Atheros chipset drivers 3.1.2.19.1123 or is it 3.1.2.45?
  In any case I never been stuck like this before with laptops and APs-seems a bit odd.

  Any idea?
  MAtt

  Hello

  You use the clean option of the Windows operating system to configure the WiFi network or using the Atheros client utility?
  If you use the Atheros client utility, so the windows option must be disabled.

  On the Toshiba driver page I found a new version of the Atheros WLan driver.
  There is a version 4.1.2.71 for 802.11 G standard. You should check the two pilots. Maybe one of these two applications will work.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good luck

• Satellite Pro P200 won't start

  I have an old 1 week per Satellite Pro P200, it turns off when I was just in the start menu, so I was not doing something out of the norm (power cable is plugged). Since then it just won't turn.

  With the connected power cable I have an electric blue, power battery and light (although attempts to restart about 2 the battery light was red, but now blue). The drive light flashes for about 3 seconds each time I try to start and I can hear something happening inside the machine, but after only 3 seconds... nothing, completely dead.

  I tried to remove the battery, wait 20 minutes or more and none of it worked. Anyone have any ideas?

  Seems to be definitely a hardware problem... very bad :(
  Why you visit your dealer for new laptop and ask for Exchange.
  Maybe the dealer will exchange the laptop with a new.

  If this isn't the case, then you must contact the service provider authorized in your country for assistance.
  If you have purchased an extra service on the spot then the technician you will visit at home and will try to solve this problem.

  Good luck

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Satellite Pro A10 won't boot up - where to get the disks

  I have a Satellite Pro A10 that currently does not start up Windows (XP) as it says

  The following file is corrupted or damaged:
  C:\windows\system32\config\system

  Tools & Utilities CD that came with my laptop has unfortunately been scratched and will not start.
  I have two system recovery disks, which are very good.

  My questions:

  1. is it possible to buy a replacement Tools & Utilities CD-Rom?
  2. If Yes, where to go?
  3. is there a way to restore my laptop without having to reinstall everything completely and lose all my files?

  Thank you

  Post edited by: Stuart_2007

  With regard to the point;

  (a) generally, it should be possible to order the CD of tools & utilities but I ask why?
  (b) you can buy the CD of the ASP in your country
  (c) the older recovery CD is supported by an expert mode. You can use this mode to choose the partition where the OS is to be installed. In this case only, this partition will be formatted.

  But look, man. You do not need to order the CD tools & utilities because on this CD, you will only find the Toshiba drivers can be downloaded from the Toshiba page too.

• Satellite Pro A10 won't start HARD drive

  I have a Satellite Pro A10 that is not responding. If I have the connected HARD drive I get a ' insert System Disk... "message, I checked the HARD drive with a 2.5" USB connector in another computer and it seems OK.

  The laptop, I cannot change the boot order to select CD-Rom so that I can try the recovery disks. I can't get into the BIOS, but the Boot Priority option is not selectable.

  Any help appreciated.

  Especially this error message appears because the Middle starts not able.
  You insert a boot able CD?

  Try this: connect the computer laptop HARD drive to a USB adapter and try to format the whole HARD drive.
  Then put it in the laptop, insert the bootable CD and try to boot from the drive.
  As mentioned you could press the C button immediately after you start the laptop

• Satellite Pro - screen won't go full size

  Hi all

  I'm full idle, recently my laptop flatend using an OEM version of windows XP, I'm able to see things the size of my laptop screen.

  I tried to change the resolution of my screen, but that did not help...

  Maybe it's my graphics card driver (or so I thought) but then I can't find it on the toshiba site (mostly because I don't know what model my laptop is... Just that it's a satellite PRO.

  Please, please, please can someone help?

  Hello

  Yes, it could be a missing graphic driver but I don't know m.

  The drivers for your laptop, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  And on the side of your laptop must be a sticker where you can see the exact description of your laptop.

  Welcome them

• Satellite Pro 4600 won't start

  I have a Satellite Pro 4600 w / Win2000, 15 GB HD, CD-ROM, P3 800 Mhz, 128 MB of RAM. It will not start. I can plug in the power cable and the lights show the battery is loaded or loads, the power is connected. When I press the button I get no sound from the laptop (no fans or HARD drive) and there is nothing from the HARD disk (no light whatever it may be), but the "On" indicator light turns green even if nothing else happens. Someone at - it an idea what could be wrong with that, and if/how I could fix it?

  Thank you, Adrian

  Hi Adrien,.

  As a first step to diagnose your problem, I suggest you to unplug the unit from AC power and also remove the battery completely. Reconnect AC power and try to turn on the unit. If it works then stop it and reinstall the battery and try to turn on the unit again.

  If the procedure above does not solve your problem, then it is likely that there is a problem with the internal components of your laptop in which case you will need to be serviced by an authorized Service partner.

  Kind regards

• Satellite Pro U300: No connection to the local network after updating BIOS 5.00 - WIN (Vista32)

  Hello!

  After the bios update newest to my Satellite Pro U300 (PSU31E) Lan Realtek adapter not working anymore. The map shows in Device Manager, but if I connect a cable, nothing happens (it says no cable connected).

  ipconfig-all says:

  Adapter Ethernet LAN connection:

  Medienstatus...: En medium (disconnected)
  Suffix-Verbindungsspezifisches DNS:
  Description...: Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address: 00-1B-24-98-D7-AA
  DHCP aktiviert...: Ja
  Autokonfiguration aktiviert...: Ja

  Thanks for your advice!

  Hello

  In your case I would uninstall the Realtek LAN driver.
  Can I visit the Realtek and download and reinstall the latest LAN driver.

  In addition, in the DOS command window, you can try to run this command:
  * Ipconfig / renew *.

  PS: Try to also set the default BIOS too.

  Concerning

• Satellite Pro A200 cannot connect to the wireless network

  Hello

  I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

  I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
  Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

  Any ideas?
  the FN/F8 will work?
  Help! Please, I beg you!

  Have you tried using System Restore and restore the operating system on time earlier?
  Maybe this will remove the update installed, and you can again use the WLAN.

  Check it out.

• Satellite Pro A120 - drivers need for ethernet and network

  I rebulit a Toshiba Satellite Pro A120 (PSAC1E) with XP pro and I'm having a hard time finding drivers for the * Ethernet controller * and * network controller *.

  I downloaded all the drivers available from the site Web of Toshiba and installed these LAN and WIFI still do not work, I downloaded Intel drivers also and they have also failed to get the devices to work.

  Does anyone have a possible solution for me?

  Try the drivers from the Toshiba site and there you can also download the installation instructions:

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro A60 failed to connect to the network after the fashion watch

  Satellite Pro A60 running XP Home.

  When I close the lid it goes mode 5000mAh as set upwards. When I lift the lid, I find that I have to restart to re-establish the connection to the internet through the wireless router. When this happens other computers using the same router not disconnected.

  I've heard talk about this but I got lucky and on my Satellite WIFI connection works after minutes again. Have you tried to deactivate and activate the WLAN using FN + F8 key combination?

  Maybe after short toggle the WiFi works again.

• Sat Pro M30: Can't see the wireless network.

  In my work, we have the wireless network. When I search the network I don't see. the wireless signal is strong.my laptop Satellite Pro M30's.

  Could you please have the solution or know what the problem is.

  Hello

  Have you used the Atheros WLan or Intel WLan card?
  As far as I know if you unit has an Atheros WLan card you should always use the Atheros Client Utility to connect to some networks.
  In this case, the option use Windows to configure my wireless network must be disabled. If you the Intel card this option must be checked.

  Please visit this site and points.
  http://www.laptop.uwaterloo.ca/help/users_wireless_troubleshoot_list.html

  Good luck

  Good bye

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• Satellite Pro: screen won't turn on boot up

  The Pro was working fine but all of a sudden, when he was arrested at the screen lights not to start. I can just make icons for users and right angle can see the mouse pointer. If I click on the user icon, and then the computer starts and works normally. Why the screen will not properly start the normal start?

  Hello

  Have you used the device display change utility?
  With the FN + F5 key combination, you can change the display options.
  Try to use it and check if this will solve your problem.

  PS: Check the properties of the graphics card and try to disable the extended option of the office, and the second screen.