power battery but laptop will stop when disconnected from the mains

Similar Questions

• Put automatically the laptop to sleep when removed from the base?

  Hello

  Many members of our society are using portable computers. However they all use docking stations when in the office. Nature from home they all simply press the eject button on the docking station and put the laptop in their bag. As you know that the laptop stays on since there is no action in the Power Options, simply what happens when "I close the lid.

  Some have killed cell phones in this process, it is recommended to put the computer to sleep manually start before removing from the dock menu and go about your day, but naturally not everyone follows this process.

  So is my question there a framework built in Windows 7 that will put the computer to sleep automatically in case the laptop lid is closed under power and is suddenly disconnected from the power?

  I have searched through ACPI configurations but came empty-handed.

  Any help would be appreciated!

  In addition, we are a boutique HP and use their cell phones of class business.

  I think that implementing standby when the lid is closed so that hip will probably solve it. Unfortunately I can't imagine a way to detect if it is not connected to the dock because as much as I know Windows doesn't support that.

  Apologies, I couldn't help-maybe someone knows if it is possible?

• Laptop stops when unplugged from the sector

  Battery check reads well, does not start on battery

  Sounds like the battery is dead.  Replace or test professionally.

  "PeteXJR1300" wrote in the new message: * e-mail address is removed from the privacy... *

  Battery check reads well, does not start on battery

• Satellite C855-149 stop being disconnected from the network

  OK, so yesterday I had to switch my cell of a room to another (it's a Toshiba Satellite C855-149).
  Its usually connected to the grid, so I moved and everything was fine.

  After a few hours, I decided to go back to my room and as soon as I unplugged my laptop charger (my battery was full), it will stop. The fact that since then.

  It shows that the battery is at 100% and that the laptop is connected.
  I started looking for advice on the internet and I found this program called BatteryInfoView.

  That's what it shows: http://imgur.com/H9n8phU

  It looks like the battery isn t correctly initialized.
  Try the next solution.
  Go to the Device Manager, expand the section battery and remove / uninstall compatible ACPI control method battery.

  Restart the unit. After that, the deleted entry must be recognized again.
  You can now check if the laptop turns on if the adapter has been disconnected.

  If this did not help you, I recommend you remove and insert battery while the laptop is running.

  Your comments would be appreciated.

• My PowerConnect 6248 switch loses its settings when disconnected from the power

  Hello

  I'll put up a PowerConnect 6248 switch on my local network through Web interface (I can't use serial to do).

  I put the IP, login, password, a LAG, SNTP server address, etc.

  It works fine until I unplugged the power cord to the switch to simulate a power outage. When I plugged in the power cord, the switch will reboot by displaying its default settings and I release all of mine.

  Y at - it a specific command, I missed to save all my settings in the switch?

  Thank you for your help.

  Pascal.

  The switch has two separate configuration locations, a running configuration and startup configuration. This allows you to change configuration and test running before engaging them in the startup configuration. Once you have the running configuration, how you want it, you need to run the # copy running-config startup-config command, or just copy # run start.

  See you soon

• S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

  I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

  UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

• HP: Laptop randomly stops when it hits 15%

  He started only today. My laptop would randomly just turned off when the battery was low. When I checked the percentage it shows 15% when I turn on my laptop. I already checked power options, and everything is normal. I was wondering if anyone has solutions to this. In addition, I notice just that my phone would not charge from 90 percent. It would charge up to 90%. Thanks in advance.

  Hi @davevidduong,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that your laptop randomly stops when the battery is low. It will be a pleasure to help you here.

  A remarkable work has been done by checking the power options. You did awesome troubleshooting before you post your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and levels of technical knowledge.

  For clarity, I would need more information to help you best.

  Please let me know the product # computer.

  Have you checked if it stops when the charger is connected?

  This could be a hardware problem with the battery and we need to insulate it properly. In the meantime, please try a hard reset first. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Then visit this link to update the bios and HP support assistant. Link: http://hp.com/drivers please select the country and follow the on-screen instructions. Once this please visit this link to run hardware diagnostics on the battery and other components. Link: http://support.hp.com/in-en/document/c03467259 if please run full diagnostics and note any failure code if a component fails. Mainly to run diagnostics on the battery. According to the information that you could later calibrate the battery.

  I really hope things the excellent work and the problem is solved without hassle. I hope this helps. Please let me know how it goes. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts. If it helps, Please mark this "accepted Solution".

  Take care now and have a week coming Holy.

• When you transfer files to the internet, the router disconnects from the internet, but the network remains in tact.

  I have a wireless router Belkin g with 1 Server 2003 cable and 2 xp machines and 1 machine vista wireless. My problem is when you transfer files to the internet, the router disconnects from the internet, but the network remains intact. I cannot remote in all computers, but not internet. Once I have restart the router, everything works fine. I was wondering if anyone else has had this problem and how to fix them.

  original title: problems with the router.

  I have no solution for you.  It seems more likely to me that it is a hardware problem - but if it was related to traffic, I would expect that the problem on the downloads more downloads.

  In addition to DSL reports, you could try to ask some of the forums that specialize in the updated firmware for wireless routers.  This is not to say that you need to install the modified firmware (although there may be good reasons to do so), but people who do usually firmware mods are much how the equipment works and what might be its potential failure modes.

  Is one of the best-known sites DD-WRT.com, but there is one list of other here: http://en.wikipedia.org/wiki/List_of_wireless_router_firmware_projects the firmware on these sites was originally designed to run on Modem Linksys WRT54G, but applies generally to Linux with chips Broadcom - based wireless routers and DD - WRT claims that its firmware takes care of some Belkin routers.  If your router is one of those on what DD - WRT will work, there will probably be someone in the forum there will have something for you.  See the list here: http://www.dd-wrt.com/site/support/router-database

• Windows Media Player 12 will not play mp4, mp3, wmv files through IIS hosted local site when the PC is disconnected from the Internet

  I have an IIS Web site 6.1 on local 32-bit Windows 7 machine that serves HTML and MP4 videos via Internet Explorer on the local computer.  An internet connection is not necessary because it is all local storage and local accommodations through IIS.  IIS is configured to serve the MP4 videos in the form of downloadable files, don't not streaming somehow.  I have the right MIME type ".mp4" with the installation of "video/mp4" in the IIS server, so I don't think that's the problem.

  When the machine is connected to the internet, by clicking on a video link MP4 in any HTML page served by the local IIS server results in Windows Media Player opening and playing the video in its own window.  However, when the Ethernet cable is unplugged, by clicking on the same results of video link MP4 in Windows Media Player by opening its own window, and then display this error message:

  Windows Media Player cannot play the file.  If the file is on the Internet, connect to the Internet.  If the file is on a removable storage card, insert the storage card.

  It's almost as if Windows Media Player has a bug and since it accesses this media file via a URL, but the machine is not connected to a network, he thinks that this file is unplayable.

  When the Ethernet cable is disconnected, the local IIS server is still all the HTML code and ActiveX content except for media files.  I also tried to access MP3 and WMV files via the IIS server to see if Windows Media Player will open those when the computer is disconnected from the Internet.  These caused also Windows Media Player files display the same error message.

  I tried the VLC (VideoLAN) Player after changing the property file in VLC of WMP for .mp4 files extension.  With VLC installed and the extension changed to VLS property, I can download/open the MP4 video using the link in the web page served by IIS all when they are disconnected from the internet.  The only thing I can't do is get VLC player to open and play the video simply by clicking on the link in Internet Explore web pages served by the local IIS server.

  I would like to make use of Internet Explorer and Windows Media Player with this IIS server that serves the MP4 videos rather than using VLC player.

  Thank you

  Michael Rayman

  I finally found the answer to my problem:

  When they are disconnected from the internet, mysteriously, Windows Media Player 12 requires that you check a checkbox in tools > Options... > zone settings tab player called "Internet connection (ignore the other commands).  Once this box is checked and the settings saved on APPLY, then Windows Media Player 12 will play videos served by the local IIS server on the same machine, while disconnected from the Internet.

• Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Hi, actually I want the program stops when you press the stop button. but the problem is the program is runing in loop only he doesn't return tile view deleted complete execution of any body can help me for this.

  Here

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do?

  Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

  Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

  Where can I find my homegroup password?

• Lightroom will stop when you try to save the image to the Gallery

  Lightroom will stop when you try to save the image to the gallery. It just stops without warning. And he always seems to be synchronization?

  I have a Huawei p7 Please help!

  Hi AnnCicilie,

  Make sure that if the application is up to date.

  If this does not help, could you please share the newspapers of diagnosis by PM so that we can check more?

  Follow these steps to collect logs:

  • Open Mobile with Lightroom application
  • Click on the LR icon at the top left:

  

  • Press and hold the Lr icon at the top left that mentions your Adobe ID and click on generate Diagnostic log

  

  • Send email to yourself so that you have them on the desktop and then, share with me by PM

  Concerning

  Claes

• Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  The family of products Acrobat 9.x passed in mid-2013 "end of Support".
  Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
  To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

  A good reference:
  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Acrobat Pro and Standard DC are what are currently available for purchase.

  Be well...