power of passorwd and passorwd the admistrador

Similar Questions

• HP 2000 Power 2000-2c29WM PC: enter your displays of power on password and then the system goes into repair automatic bootloop

  It asks password admin or power on password and past the preparation of auto repair. So, if I could get the power on password and has anyone encountered this problem

  @MovingShadowTec

  When asked for the password enter 74520968

  REO

• Satellite A300 power suddenly goes out during the race for hours

  Dear users of the Forum,

  I am facing a strange problem in operation.
  My laptop Satellite A300 is suddenly down power during the race for hours.
  It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

  This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

  I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

  Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

  I tried to run only on the power (remove battery) and got the same result.

  can anyone identify the problem? can you please give me the solution?

  smarjit1

  Hello

  I put t think it is s virus.
  En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
  I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

  Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

  What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

• PC is slow and get the message insufficient disk space

  my PC is slow and I get a continious pop up indicating "you run low disk space on the local disk C:.

  What should I do?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 5 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

  I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

  Hello

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

• Pavilion g6: customer loses power on password and I need to recover the laptop - Pavilion g6

  customer lost power on password and I need to recover the laptop - Pavilion g6

  The disabled return code is = 63078592

  Hello

  Come in:

  72950514

  Concerning

• Satellite P30 will not start, but shows the power on LED and fans work

  I work on a P30, radiator cleaned, the basic form of new fine thermal compounds, worked for a few hours, then turned it off and move the power LED lights, fans, cd rom works, but it is she, no display, no boot, nothing.

  Any ideas on how to solve this problem would be a great help.

  Plug

  P30
  P4 3.2 ht
  1 gig of ram, tested.
  XP pro

  Hello

  On this path, it is not easy to say what can be the problem and just inquiry may help, but from your description, I'm afraid that there are some critical material damage. It may be something wrong with the power supply (motherboard) or perhaps is the grilled CPU if you have done something wrong with the thermal paste.

  Sorry, but I think you should contact the partner customer Service in your country and check it properly.

• The application of health on my new 6s shows "no data" power, active energy and stand hours of rest.

  Health app shows "no data" power, active energy and stand hours of rest

  Hello, Mjalderman.

  Thank you for visiting the communities of Apple support.

  I understand that some application of health data is not followed.  Looks like you don't have a device such as an Apple Watch or similar tracker connected to your iPhone 6s.  You would need a type of source or fitness tracker to collect these data before it would show in these categories.

  Collect health and fitness

  Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch

  I have included a few options of our Apple store to give you an idea of what is needed to keep these categories.  You are not limited to these options.

  Fitness Tracker

  See you soon

• The food is just out on my Power Mac G5 2 .3GHz so it does not start. My question is, if I pick up another opportunity G5 2 .3GHz and install the HDD of my G5 will be a new start up as usual.

  The power just went out on my Power Mac G5 2 .3GHz and will no longer start up. My question is this. If I pick up another opportunity G5 2 .3GHz and install the hard drive of my computer it starts as usual? I just need to get the files on my computer.

  J.

  Yes, if the disk was not damaged.

• Ethernet and power to stop work on the Thunderbolt display

  I have my MBP connected to a thunderbolt, power of the connection screen and using the ethernet on love at first sight port to connect to my router.

  These two functions has stopped working. The USB ports still work and the works of the display, but stopped power and ethernet. Is there a way to re - configure or troubleshoot this?

  You can unplug the TBD from the wall, wait 3 minutes and reconnect.  Who can help.

• Lenovo Y510P | Sudden power loss on unplug and operate the State cycling under the optimized battery

  Hello

  I recently came across these related problems on my Lenovo Y510P of power: model i7, 8 GB Ram, GT750M configuration.

  ----

  It started after I installed a new SSD for the system, the clean install of Windows 8.1 with all latest drivers except the previous version of the BIOS and Lenovo Energy Management. Until all this started, the battery would not charge I have troubleshooted and fixed this problem by removing the battery and holding down the Start button. Over the next few days, I started to have additional problems.

  When I unplugged the power adapter, the system suddenly put off the power. Here is what happens:

  1. turn on the system with connected adapter and battery attached.

  2. unplug the adapter

  3. quickly plug adapter

  4. Quick disconnect adapter again.

  5. the system turns off completely.

  Then, I started to notice that the "Battery optimized" regime, the power state would be cycle between power adaptor and batteries, as observed in the cycling of screen brightness and performace cobs. This has happened only if the battery charge level was higher than 60% but less than 98%. Regularly, I used this energy system and did not notice this problem until very recently.

  ----

  I reinstalled the original SSHD (same OS and driver installation methods), where these issues were not present in the past. However, two problems remained.

  I've updated the BIOS and the Lenovo Energy Management to the latest versions. Two problems persist.

  ----

  I would appreciate any help or insight. My tech knowledge level is above average, so feel free to use the advances or procedures. Thank you!

  I don't know what the problem at the moment with your laptop, but if it's a problem with the power supply or the battery it can easily lead to a fried motherboard.

  I would like to communicate with Lenovo and send the laptop for repairs or ask for a replacement charger and battery.

• When I start my computer, I connect by entering my password but the screen shows just the loading circle until I have turn off the power and turn the computer back on

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.

  Hi Greg,.

  ·         Have you checked the problem in safe mode?

  ·         What version of Windows operating system is installed on the computer?

  Try the following.

  Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.

  Start your computer in safe mode

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• power supply beeps and does not charge since located in a country where the average temperature of 38 ° c

  Since I started so that connected beep 3 months in Nicaragua (this voltage converter) my Compaq Presario CQ61 Notebook power and charge more.

  When you're disconnected beeps constantly.

  Is it possible that the problem is solved when the power supply cools at an ideal temperature or you hear a beep that it will be necessary to get a new charger?

  Thanks for your replies!

  The temperature is unlikely to be the cause of the problem.

  The power adapter (sometimes called power brick) is designed to operate in a wide range of voltages (from 100-120 Volts AC) or 220 - 240 Volts AC) the only thing that differs is the type of power connector used to connect the power adapter to a wall outlet of the home or office.

  Remove the converter and use the correct power cord or travel adapter Nicaraugua. Your adapter will not explode or be damaged. Converter is likely to be the issue.

  You need a North American power cord to the adapter. You should be able to buy one on site or just go into a travel store and buy a travel adapter set. That's what I have for when I travel to the United States for business or travel.  I bought my Brookstone set for about $30.00 USD.