Similar Questions

• Power supply on the move...

  What link should I plug my USB 2 plug in my power supply for my MBP 13 '' end 2011...

  None of them. The USB ports on your MacBook Pro are not designed to provide a high current to charge a power supply.

  In case you were keen to use it to power your MacBook Pro, you should know that your MacBook Pro will not charge or run a USB power supply.

• My iMac was bought from China, it runs on 220V power supply, can it be moved to the United States working at 110 V?

  My iMac bought from China, he works with 220V power supply, can it be moved to the United States working at 110 V?

  Electrical and operating requirements

  Voltage: 100-240V AC

  Frequency: 50 Hz to 60 Hz, single phase

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  Relative humidity: 5 to 95% without condensation

  Operating altitude: tested to 10,000 feet

  of https://www.apple.com/imac/specs/

• Power supply on the Pavilion a6614f?

  I want to buy this desktop computer and add a Nvidia GeForce 9600 video card, which requires a 400W power supply, but I can't find any info on what the computer is supplied with power supply. Any help?

  The HP Pavilion a6330f PC at home has a 300 Watt PSU.  You will need to replace it.  My recommendation:

  http://www.Antec.com/USA/productDetails.php?LAN=us & ID = 27430

  Available here: http://www.directron.com/ea430.html

• Z640: Upgraded the video card to 1070 GTX. I have to upgrade power supply?

  My Z640 has a supply of poer 925w but the power plug 6 pins only I think remaining is not enough to feed my 1070 GTX video card in use heavt. It requires care supply 2 x 8 pins and adapter I installed is not always able to provide enough power. HP chat support wasn't any help. Do I need to install a new power supply that provides power sheets 8 pin pci-e?

  @MacTheSteve, welcome to the forum.

  This is Service and Maintenance Guide for the workstation.

  I contacted StarTech to see if they would have an adapter 'Y' which had two 8-pin power connectors.  However, those that they should be the following on your motherboard or the power supply:

  StarTech Brandon: basically, there are 4 SATA power or LP4 molex.

  I believe that your diet is enough power, but simply do not have the required connectors.  At least, I don't the seen on the diagram of the motherboard.  It seems that you need to upgrade the PSU.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• The Portege 7020CT power supply works with the dock?

  Hello

  I have a Toshiba Portege 7020CT (I know its old)
  I would buy a Toshiba PA3007E-1DST on eBay!
  In the description of sellers on eBay, it is written that a power supply is not included!
  So he lies to be included power supply? Or am I ment to use my laptop Portege of power?

  All responses are greatly appreciated!

  Thank you
  Nick

  Eh, it's really amazing that someone still use this old machine Portege. I hope it works perfectly.
  If I m remembering well at the back of this port replicator is the DC power connector, so you should be able to use the AC for your Portege power cable and connect it to the port replicator.

  The connector must be the same.

• Corsair POWER supply update does not post, powers of the powers of 5 seconds down and loops...

  Have the HP Pavilion Elite m9650f with motherboard replaced in April 2012 class good to go.

  Replaced the stock GPU Nvidia GeForce 9800 GT with a Zotac GTX 560 Ti GPU and

  the stock HP 460 Watt power supply with a W0388RU Thermaltake TR2 600 Watt PSU in may 2012.

  All goes well until October 2012.

  PC randomly starts shutting itself off the coast and not feed until I have unplug the power cord and wait 5-10 minutes.

  Finally, he stopped turning on all together.  Reinstall all power PSU connectors, etc.  same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstall the stock HP 460 Watt PSU, now everything works fine.

  Thought it was a premature failure of Thermaltake PSU.

  Bought and installed a Corsair CMPSU - 850TXV2 850 Watt power supply for a few days but still not good to go.

  Lights, fans spin, but no MESSAGE, no video, tracks for all

  5 seconds, stops, turns on itself over and over again.

  Reinstall all power PSU connectors, etc. same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstalled the HP PSU stock, now everything works perfectly again.  ?

  Spends hours reading the forums...

  Some say that the RAM may not report correct voltage for power supply.

  If so, what can I change RAM voltage in the BIOS?

  Others say reset CMOS I did, same result.

  And someone on this forum HP thought that perhaps the Pegatron IPMTB-TK

  Card mother Truckee can only accommodate up to 750 Watts POWER supply.

  Any ideas?

  Can I get away with just using my HP 460 Watt power supply after all stock?

  Thank you.

  I have an additive to add to this topic.

  To refresh, my questions focus on a possible shift of the power supply and card mother specs:

  What is an ATX 12 v 2.0 and above technical problem or a power CAP problem?

  I posted my questions on the Forum of power SUPPLY Corsair PSU

  at the same time and I paste it here now, a response

  to GUY of RAM.

  "Hey RAM GUY."
  
  Sorry I couldn't answer until now.
  
  Please specify the difference between the ATX 2.0 specification and 2.01
  
  Spec that the negative - 5 v Rail is not present in the 2.01 spec and
  
  beyond.  As I mentioned previously, the Thermaltake PSU that has been
  
  running in my 2009, HP i7 tour for 7 last month said 12 volt ATX 2.2
  
  on the case and even if the power supply HP OEM said 12 volt ATX
  
  2.0 in the technical literature, that I found on Google, the real PSU I have does not work
  
  have any note on the case ATX specification.  So I think it's safe to say, my
  
  motherboard does not have the negative Rail v-5 at which he played
  
  nicely with 12 volt ATX 2.2 spec, until recently.
  
  Although theoretically it is supposed to be no limit on the amount of
  
  Absorbed power, you can use to power your motherboard, the motherboard because
  
  is supposed to use only what suits him and cap the rest, it seems that the OEM
  
  can dial up limitations of power if they deem necessary.
  
  Could be as simple HP, without wanting to compete with some of his HPs
  
  Professional workstations, caps so power on some Pavilion Elite
  
  Series models to prevent them from becoming a much cheaper
  
  solution.
  
  In any case, I think that all the available information, digested, he does not speak
  
  Specification of the ATX, but rather my motherboard HP has a limit of 650 Watts of power
  
  If I think that I read that someone else got the same motherboard goes with
  
  750 watts, but I do not remember where to find this announcement. »
  
  I'm back and Yes!
  
  Thanks again Lasvegaswireman!

• Satellite M30X: fans do not stop if plugged into the power supply

  Hello

  I have a M30X and months fans when I'm connected to the power supply do not stop. It's also stopping often enough. However, the laptop is not hot. Do you have any idea?
  Kind regards

  Armando

  Hello

  If you connect the adapter to the laptop of Toshiba power saver change consumption patterns. Maybe the power mode with a different setting in the a? Basic setupa?. Please check the cooling method and change it to lower the level.

  But of course, the dust and debris could have a bad influence on fan behavior.

• Market with power supply is not possible on the Satellite M60-167

  Hello

  I'm sorry for my English saw. I have a problem with my Satellite M60-167. When I have connected the laptop with power supply and press the 'Power', then does'nt start Notepad.
  When I use only the battery and push a lot of times the "Power Button", that the laptop will be started.
  Question: It is a problem of material or not. This laptop that I bought it in January 2006.

  Can you help me?
  Thank you very much for your theory.

  AX.

  Hi Axel

  My theory is that there may be some problem with button / stop himself (white metal under the button), or perhaps with several Planar cable wire.

  Also, for me it is definitely hardware problem. If you want, you can contact the partner of service allowed in your country and see what they have to say about it.

• Pavilion 6540y: the upgrading of power supply and graphics card

  I need to update my graphics card. What is the best inexpensive card graphics and power supply to buy for my HP Pavilion 6540 Y. I use it mainly for work and graphic design. Currently, the stock video card doesn't have enough memory to effectively run Photoshop and painter with three monitors. Photoshop's request at least 512 M of memory for what I do, but I'd like to at least 1 GB. Sometimes I will have Photoshop and painter running at the same time.

  Hello

  I love the Corsair CX500 or the 520w Seasonic because they adapt to the physical dimensions for your PC.

  Your first consideration should be Support HP or HP sales during the consideration of upgrades or replacement of memory. If you want to consider other manufacturers of the best way to avoid memory problems is to contact one of the leading manufacturers of memory. I would recommend that you try the tools of these manufacturers: Corsair, Kingston andCrucial. Once you have determined the DIMMs that you need, then contact commercial or technical support to check that you have selected the correct DIMMS. If you buy directly from manufacturers, then they will stand behind their products.

• Replace the power supply for Tecra 8100

  Hi supports,

  I have Tecra 8100 where his original power supply is dead. I need to buy a new one, but I found that Toshiba has replaced the model of PA2444U adapter with a new model. What model adaptor which is now compatible with Tecra 8100?

  Thank you. I really need an answer because I need to work with the laptop.

  Hello

  You need universal adapter with PA2444U part number. Google around and you'll find it.

• The upgrade of the power supply for a HP Pavilion 500-054

  Hey people,

  I'm changing the 500-054 flag so that it can play a few games, not a hardcore gamer, just want to be able to play the occasional game. I want to get a lower end external video card, but this requires a power supply greater than 300. I am looking for a new power supply for my computer, but I couldn't find one for the 500-074. Are the ones that will work for my computer or I am a hopeless case?

  Thank you

  A standard ATX power supply will work. Please look at the Corsair CX430, CX500, CX600, or their variations of modular cables for your needs.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• How to use the Camileo H30 with Power Supply

  Hello

  First: Excuse my English, im from Germany ;)

  I have a Camilio: 30. its has been purchased used. I've only had the camera & the original battery.
  No supplements (such as usb or power supply cable original)

  what I want: I need to shoot for a few hours. The battery is unable to do. so I want to use it with a block of power, but when I put in (throughh a mini-usb connector) of the camcorder goes into charing (no actions are possible), but I want to make full use of the feature when the power is connected.
  How should I treat it?

  I got an a 2, 25 a 5V power supply, I think its enough... or not?
  The label on the side of the camcorder bottum said 5V 2A...

  Thanks 4 help me :D

  Greetz

  Hello

  If the Camileo H30 and I got this camcorder with battery and adapter supporting USB mini jack.
  The s AC adapter camcorder supports the release of 2A and 5V
  Its model DSA-10 p-05

  Google for this model, maybe you could get one from some dealers online
  Otherwise recommend that you check the other adapters supporting these values.

  For example this one:
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=484958

• Can I put the Pavilion Slimline 180 Watt power supply to a 300 Watt PSU

  Of course, you can!

  Here is an informational videoabout the possibilities of upgrading your slimline WHAT PSU found on YouTube.  A comparison of three power supplies, including the owner HP PSU and a (two video and CPU) stress test and comparison of noise is shown during the video.

  Be aware that some, but not all, of the PSU, upgrades require a simple and light your PSU slimline support change. Change depends on the power supply model chosen for the upgrade.

  Purchase an adaptor molex as HP UPE is necessary for the Slimlines using a power supply with the format owners microfit ATX 24 pin, as well as the standard for the HTPC power supply ATX 20 pin format.

  Upgrade your power supply at a higher power will not damage your motherboard. A power supply will provide only so much power that is required of him by the mother and peripheral card up to the nominal power of the installed PSU.

  It is for those who wondered how to work around the limitation of the low power 180 Watt power supply that most Pavilion Slimline PCs come with the Assembly. With a power SUPPLY improved, more memory and a graphics card discrete, including support (it is a requirement) your Slimline can be your gaming PC.

  Selecting a graphics card is another topic. Not all graphics cards can hold in the case of a slimline. It takes a low profile video card. They are available for purchase online.

  Kind regards
  ERICO
  Published by erico on 15/11/2009 13:17

  Bravo for Erico 1,000,000,000. Great post. Debunks many myths and the hearsay rule.

• Xw4400: I replaced the power supply in my xw4400, always beep

  Hello

  My power supply died a week ago.  I know because she gave me a code 4 sound.  I followed the troubleshooting instructions, and when it is connected with all the cables disconnected, the fan does not turn.  Thus confirmed dead.

  I got the new power supply today, and I plugged it in with no cable attached.  The fan spun.  Power has confirmed the good.

  However, when I put back in place and turned on, I got the code of four beeps again.  Does this mean that my motherboard is fried?  And if so, where the Board of Directors is the id so I can order another?  I have the dual core intel cpu if that helps at all.  Not the extreme, just the duo.

  Thanks in advance for your help.

  After I plugged in a monitor, I doscovered that the computer was in the way of the message and then affected by the thermal shutdown.  Replacement of the entire radiator and fan made me a work computer.

  The problem was a bad video card.  For some reason, nor Council picked up the problem.

• Satellite A30 213: broken in the power supply pin

  I have so many problems with this.
  I'd rather put it in the trash than to fix it, but unfortunately I have important documents that I have not saved.

  Basically, the PIN into the Jack of the laptop is broken and I can't be able to my laptop and my battery is running out of power

  The battery is in the battery-compatible A30 - 213 in the A30 714?

  And someone has other solutions?

  Please answer as soon as possible

  Hello

  First of all a few words about the battery.
  If I m not wrong not the Satellite A30 213 uses the same battery as the A30-714.
  Therefore, you should be able to use the same battery in both units A30.

  With regard to the question on another solution.
  Well, there is only one real solution. The power supply needs to be replaced.
  I m not sure if it s only plugged or soldered on the map. However, I recommend you contact the ASP in your country for assistance.
  This should be always replaced by a mobile technician because the dismantling procedure is very delicate and difficult.

  Best regards and good luck