Power problem with LG TV

Similar Questions

• With Satellite A30 power problems

  Hello

  Over the last four years, I have been using a Satellite A30 with XP Pro... had no problems whats so ever until that last months... I started to notice the battery life becomes lower before (prob because of the decrease in battery life) but also when he is on the grid it will charge the battery to 100% but instead of power are removed from the sector It starts to drain the battery even when the sector is connected.

  Another problem is that I have to keep or stop the laptop goes into hibernation mode so it can recognize it is powered from the battery to load... even in this case, it may take several attempts for the laptop to begin to charge the battery...

  These problems started start after warranty, and was released in additional insurance coverage

  Any information or help gladly appreciate it that I fight to get assignments done University

  Thank you

  Ben

  Hi mate,

  had a similar problem with an other friend A30. After sending the machine to an ASP (certified partner), they told us that the internal charger was defective and they have offered to swap the motherboard.
  But given that the motherboard was really expensive for him he sold the machine on Ebay and bought and Satellite A200 which is a machine really well.

  I guess that the motherboard is gone...

  That's all

  See you soon

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• Power supply with Satellite M30x problem

  When I connect my Satellite M30X in power, he sometimes shows the power light and the battery light. It can then be turned on and will start and run.
  Most of the time the power light blinks and the battery light stay out: it will not illuminate.

  When it turns on, it will work for a period of a minute or two till about 4 hours and stops randomly.
  Now the led starts flashing and continues to Flash while it is powered.

  There must be some problem with electronic control gear. Strange is that this problem occurs from time to time.
  Sorry, but if you want to get rid of it you must contact Toshiba service and let check your laptop.

  To be honest, it can happen that
  Entire motherboard must be exchanged, and it can be quite expensive. Might be time for the new laptop computer. Satellite M30 is really old.

  What do you think of all this?

• Problem with M30 power indicator

  Hi I have a satellite m30 and when I plug my power adapter, battery indicators starting to keep flashing (all of 3 leds flashing) and it does not load. I tried to remove the battery and plug in the adapter again the LED indication has stopped working and there was no power connect to the laptop. the indicators flash only when the battery is placed. I wonder if theres nothing wrong with my adapter or my battery was completely dead? (my 'save energy' got screwed up recently with a 'fatal error' message so it might be wrong with the operating system I think).
  any help would be appreciated.

  see you soon
  Dave

  Hello Dave

  On this path, it is not easy to say what can be the problem, but I guess that there is some problem with electronic control gear. It is placed on the motherboard. I recommend you contact the authorized Service partner and let check the device.

  You can explain exactly what is happening, and I'm sure they will be able to give you good advice.

  I put t know not in what country you live, but on this page you can find SPAS in your country.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  Good luck!

• Seriuos problem with power supply

  Hello, im new and I have a seriuos problem with my computer toshiba laptop satellite there is a problem with the end power cable the cable that goes to the laptop the caches on a metal stick and once the stick came out with the cable and I lost, is there a way to fix it or get the stick somewhere? I can't charge my laptop without it and sorry for my English: (of cause.

  These problems must be handled by authorized personnel only, so I recommend you to contact the nearest Toshiba authorized service provider and ask for help.

  The laptop must be disassembled and DC in port soldered to the motherboard or may be exchanged with a new one.
  You think you can fix it yourself?

• problem with this message on my first screen "password administrator or power on password"

  Help me

  problem with this message on my first screen "password administrator or power on password"

  I have HP ENVY m6 - 1251sr notebook pc with window 8

  When I type the wrong password three times, and then it displays a message; -disabled system [63268677]

  Please help m m waiting for your replay

  Hello

  Try to enter: 72140279

  Kind regards

  DP - K

• Weird problem with Qosmio F50-108 - power power button

  Hello

  I have strange problem with button / stop on Toshiba Qosmio F50-108 - pressing the power button won't start the computer. Now, the computer starts only when I press the first button to the right of the power button (Toshiba button Support).

  It's as if the buttons have been activated. The power button is still able to stop the laptop or put on standby when you press on, but it no longer starts. Recently, I had my laptop on the service, but I put t know if it has been opened or not. Is it possible that the problem is hardware related or is - this serious just of system configuration? It would help if I Flash the BIOS? Otherwise I will take to the service again.

  Thank you for the answers!

  Hello

  If the laptop was on the service, please call them and explain the situation. Start button / stop is only the button that can be used for the specification of switching on and, as far as I know, it cannot be changed with certain parameters.

  I assume that there must be a contact problem.

  Call and see what they say on this subject.

• HP Pavilion G4 1310AU: problem with power supply for laptop HP Pavilion G4 1310AU

  Hi This is my first thread in the toms hardware, I have problem with my laptop power supply. my laptop cannot turn on if I remove the battery and use the charger only, but if I use my cell phone battery can turn on without problem for my laptop to use the battery to turn on and after my laptop that works and I remove the battery my still laptop running with the charger plugged, and that I charge my phone when my battery<80% capacity="" e.g="" on="" 40%="" battery="" power="" my="" laptop="" underclocked="" processor="" speed="" to="" 800="" mhz="" from="" 2.5="" ghz,="" i="" have="" changed="" power="" management="" in="" windows="" setting="" and="" amd="" catalyst="" to="" running="" full="" speed="" when="" plugged="" in="" and="" charging="" but="" my="" laptop="" still="" underclocked.="" i="" have="" updated="" my="" bios="" with="" latest="" version="" but="" still="" underclocked.="" after="" 100%="" fully="" charged="" my="" laptop="" processor="" running="" in="" full="" speed="" at="" 2,5="" ghz...="" other="" that="" no="" issue="" in="" my="" laptop,="" everything="" running="">

  I'm never use my laptop for 3D games, most of use for the office, watch video, listen to music and navigation

  My computer laptop specifications
  AMD A4 3305M 1.9 Ghz Turbo up to 2.5 Ghz (TDP 35watts) (Dual Core)
  2 GB OF DDR3 RAM
  HARD DRIVE 500 GB
  DVD RW
  Bluetooth
  14 "monitor

  What is my charger underpower for power to my laptop? my charger is genuine HP with 65 Watt (18, 5V and 3, 5)
  should I buy charger 90 watt (19V and 4.74)?
  or my default charger? so, my charger not Power not in 65 Watt as a specification written in but less than 65 watts running?

  Thank you

  Sorry for my bad English

  Hi @Dana88 ,

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I understand that if you remove your battery, you can't boot up your laptop.  This is not unusual. some laptops are set up in this way.

  I understand that when you have the phone connected and charge the batteries of your performance is lowered.  There is more than one draw powere when it loads to the battery.

  Here is a link to the laptops HP - test and calibrate the battery (Windows 7) to ensure that there is no problem with the battery.

  Could also remove the battery once you put under tension.

  You asked questions on the use of a 90-Watt adapter.  Here is a link to HP G4 Notebook PC Maintenance and Service of Guide.  Chapter 3 page 32 lists not one that is recommended.

  Good luck!

• Problems with the Power Manager 1.51 new T60 has

  I've updated Power manager version 1.51 has and I have problems with the gauge of Power Manager in the task bar. Life remaining battery is not updated once more. Is there any chance I can find an earlier version of the software that worked perfectly before? Or there is a method to solve the problem?

  Sincerely,

  Nikita Septucha

  
  

• Power supply with Acer Aspire X 1200 problem

  Hello world. I need help. I'm new to Acer Community Forum, but have a problem with my off-warranty X 1200 desktop model. It turns off and I am unable to start it. I changed outlets and also changed the power supply cord. Still nothing. The only thing I see on the Acer Support site is "check the tension on the system setting", but no explanation on how to do this. The system has a fuse that could be replaced? Someone had a similar problem? Any ideas as to what I can do to feed her top? Thank you.

  Ethel

  Thanks for your comments. It turns out that I was able to 'test' the PSU using the method "trombone" (20-24 pin, placing the trombone open between the Green and of the sons of black earth) and confirmed that the most likely guilty was in fact the power supply. I bought a new one on eBay (about $53) and in 2 days it had in my hands. I followed an other UTube on how to replace the power SUPPLY and even if I there was, cleaned dust on the fan, etc., put everything together, and SUCCESS! Now everything works fine. I agree that it would have been probably not cost-effective to have Geek Squad troubleshoot and replace the power supply, but to do it myself, I would say that it was well worth! Considering that it was the first time that I NEVER opened a tour, I feel pretty good on the result. Thanks again for your response! Ethel

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• with laptop power problem

  I have a problem with my laptop. I pluged in a power supply, but my computer flashes as if it is jumping off the battery power. I'm also losing strength of power of dough.

  Help

  It seems to me that the charger is not plugged properly (check the connection) or your battery is going bad (if it is loss of power and charging do not when the system works on current alternative.)  Also, remove and reinsert the battery to make sure it is properly connected.  It could also be a bad sector adapter, but there is no way to really diagnose unless you have another who strives to test woth.

  If this does not work, I suggest you return it to the manufacturer for service and for a possible replacement of the battery (or you can use a local computer repair shop good reputation, but it is unlikely that they will have a battery that fits).  You can also try just to order a new battery and charger and installin themt yourself to see if that solves the problem (and then determine what is the real culpruit.  If this isn't the case, return the batery and charger (or what we tested OK) for a refund and, if necessary, and then send the computer in diagnostic and repair - it may be a loose connection or something else went wrong - I'm not sure how these things are related, and I don't know that it varies from computer to computer.

  This is not a problem of software of any kind - I'm reasonably sure it's one of the reasons that I mentioned above.

  I hope this helps.

  Good Luk!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  Check out these links:

  System (10055) error (setsockopt) Solution
  http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.html

  ODIN request does not work Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3