PPPOE in vmware with wireless

Similar Questions

• Satellite A300D-11 q issue with wireless network

  Hello!
  My Satellite A300D-11 q has a problem with wireless communication. It has all the necessary drivers for Win XP installed and connects to the wireless router properly. However, if Windows is hibernating or going on stand by, after waking up, the computer seems connected to the router but there is actually no internet and no matter what. It gets only OK after reboot. It's bad enough.

  Can anyone suggest how this can be corrected, if possible at all?

  I use Satellite A300 with WXP and Win7 (dual boot) and I don t have these problems.

  You can use combination of keys FN + F8 after stand-by mode to disable and enable the wireless network adapter check if the WIFI connection will be established?

• Y410 77578CQ problem with wireless drivers

  I have three Lenovo 3000 series Y410 laptop computers 77578CQ. These are delivered with only vista drivers. But I installed Windows XP on them and now I am facing problem with Wireless Card Drivers for Windows XP. I downloaded both the drivers listed on the Lenovo site for the Windows XP wireless network card, but both do not work. Someone help me because it is really a matter of concern to my office as we only use wireless network.

  
  

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have samsung wave3 bada os phone when I connect it with wireless bridge browser does not support or support vary well

  I use samsung wave3 phone with bada OS when I connect with wireless by wifi bridge connection a few times it supports and some time was not favorable

  Hello

  Try to contact Samsung Wave 3 support for assistance related to the question, because it is a community of Windows.

  http://www.Samsung.com/us/support/contact

  Hope the helps of information provided.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.

  WIFI & PHONES WIRELESS, ETC.

  In more of microwave ovens and cordless phones... can TV, VCRs interfere with WIRELESS signals.  I had to buy a cordless phone and it was always in the sealed box.  I was then with a laptop to the library branch when the librarian approached me and said that "even if unconnected cordless phones and microwave ovens, as well as TVS, VCRs and vacuums... can cause interference with the optimal speed of WIFI and efficiency... »

  Can someone explain if it is absolutely correct.  Of course, I politely responded that given that the laptop was still in its original packaging and seal (I had just bought and not even opened) and unplugged, it could not interfere with anything.

  Please specify.

  Thank you.

  Joe

  A non powered device (not plugged in, no batteries, etc.) cannot intervene in anything at all.  No power, no transmission, no interference. However, any electronic device can interfere to some extent with any other wireless signal, if it is running.

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• E4200 and Wireless N and coexist with Wireless G

  Looking for suggestions for wireless G coexist with Wireless N on e4200.

  I have a wireless G Router for VERIZON FIOS ActionTec network.  I just added the E4200 router wireless n.  I have the latest firmware, 1.0.03.  Hardware version 1.

  We get a few laptops for vacation and would like these to be able to use Wireless-N.  I liked phone/itouch/roku device using the ActionTec router Wireless G/B.  I would keep the router ActionTec Wireless-G/b, so that 2.4 and 5.0 ghz Wireless N only.

  I have two routers configured so that ActionTec is primary with DHCP and the e4200 is secondary, the installer mode bridge, with DHCP off and static ip 192.168.1.2.   This used as an indication-> http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506

  I have a SID for the ActionTec Wireless G network and it is set to channel 1

  I have a different SID for e4200 N wireless network, even for 2.4 and 5.0 and I left the defaults on the other wireless settings.

  Are there any other suggestions for the settings for these routers/networks coexist?

  can't test the settings wireless n for another week.  and display the results.

  Update

  so for the ActionTec FIOS router main making wireless G and e4200 as secondary in bridge making Wireless N mode seems to work...

  so after a few changes that I currently use

  -on Actiontec, main router, the value G WIRELESS channel 1 and SID-> g

  -on e4200, secondary router, in bridged mode, value 2.4 GHZ WITHOUT WIRELESS N only, and channel 11 and 20 MHZ and SID-> WIRELESSN

  -on e4200, secondary router, in bridged mode, value 5 GHz WIRELESS N only and autodetect AND SID-> WIRLESSN5GHZ

  If all networks have different SIDS, do not roaming.

  -seems new hp windows 7 laptop computers work FINE with 2.4 GHZ Wireless N, variety and very fast, but do not yet work with 5 GHz (bought on Black Friday 2011)

  -seens old windows computer hp laptop xp works with 2.5 GHZ Wireless G, but doesn't seem to work properly with either 2.4 GHZ Wireless N or 5 GHZ Wireless-N

  -seems new hp windows 7 everything in working GRAND with 2.4 GHZ Wireless N, variety and very fast

  -seems to work bridge WES610N with 5 GHZ Wireless-N, even if only 48% signal, my Roku device works fine on the bridge, and connected laptop appears 20 000 low 4000 on FIOS

  so I think that the wireless card of the customer in the old hp laptop was screwing the rest of the Wireless N network and not several devices still use 5 GHz.

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• 871W wired connect/ping with wireless devices

  Hello

  I have a 871W giving me fits.  I've been troubleshooting this for some days now and may not know what I am doing wrong.  My wired clients cannot communicate with wireless devices.  My wireless devices are unable to communicate with each other.  However, my wireless devices CAN connect to a wired device!  I know because I have a local webmail server on the side wired can be achieved wireless.  All devices, wired and wireless, are on VLAN 1, which is be the only vlan configured.

  My configuration file properly disinfected is attached.

  When I try to ping from a wired device to a wireless device, I get the following error:

  ~ $ ping 172.27.44.27
  PING 172.27.44.27 (172.27.44.27) 56 (84) bytes of data.
  From 172.27.44.3 icmp_seq = 1 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 2 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 3 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 4 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 5 Destination Host Unreachable
  From 172.27.44.3 icmp_seq = 6 Destination Host Unreachable

  -172.27.44.27 - ping statistics
  8 packets transmitted, 0 received, + 6 errors, 100% of time packet loss 7051ms
  pipe 3

  ~$

  Wireless devices simply timeout trying to ping each other.

  Thank you for your help.

  Chris

  Is there a firewall on the host wireless?

  Do you have wiresharked any traffic to see if it is to hit the dest host?

  Look at the config looks ok. Some additional ACL that I've not seen it used is here.

  Can ping wireless and wired a public IP address?

• Problems with wireless connection in Windows

  I've already updated my adapter wireless windows 7, but every time I have to leave the room where I placed my router... the connection is lost. may there is a problem with wireless my laptop range... Please help me I don't know much about this kind of things computer b. Please send me a direct link so that I can solve the problem
  OT: Network network adapter Ethernet NIC wireless networking device

  Hello

  Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. I suggest you try the steps from the following link:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Compaq CQ60-418DX boots with wireless off

  My Compaq Presario CQ60-418DX (p/n VG674UAR #ABA) recently began to start up with wireless turned off. I need to push the button wireless (twice) to allow. It's a minor annoyance, but I'd appreciate any help you can offer.

  Hello

  Try the following.

  Open windows control panel, open programs and features, right click on the entry for HP Wireless Assistant and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and reinstall HP Wireless Assistant from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44700.exe

  When the installation is complete, restart the laptop.

  When windows rebooted, open the HP wireless Assistant, click the properties button, enter a tick against "Independent controls for wireless devices installed" and then click on the button "turn on all.

  Kind regards

  DP - K

• Adding datastore in VMware with dell perc5.i after enabling vt - d

  Dear community of VMware,

  I have a problem with my v5 sphere adding datastore in VMware, the problem comes when I put the vt - d on enable. I have my store of data on raid 5 with a dell perc5.i. When I enable this feature my data store went from raid controller. Another point, when I do a new raid with en disks try to add it, I noticed that when it is being initialized, I can add the store of data without any problem. But after that is done initializing it went again.

  Now maybe you think why put vt - d j my setup is that I want to make my virtual nas/san inside vmware with freebsd, and I need to get through to my tape drive, connect to my backup server.

  No one knows what might be the problem or is it simply impossible if you turn on enable vt - d, you can not use the raid controller in the PCI-E slot more data warehouses, but just to get through?

  Other info I already have my sphere of VMware on USB

  I thank very you much in advance!

  With sincere friendships.

  Emiel

  in the community, I've seen a few posts, where they said there are some problems of hardware compatibility with perc5i and vtd, the challenge is to use perc6

  Some say to upgrade firmware for some versions of LSI perc consult the links below

  http://communities.VMware.com/message/1826092

  http://communities.Intel.co.jp/thread/20540