Practice exams for 3.5

Similar Questions

• VCP6-VTC practice exams

  Hi, I passed the practical exam 20 question for Foundation 2V0-620 and 621 - 2V0, but I need to practice a lot more exam test... where can I found test facsimile?

  
  

  Thank you

  Hi Lori87,

  I read book Mastering of vSphere 6 and play quizzes in * link to discharge of brain removed by moderator *.

  Good luck!

• Best Practice Guide for stacked N3024 switches

  Is there a guide to BP for the configuration of the 2 N3024s stacked for the connections to the server, or is the same eql iscsi configuration guide.

  I'm trying to:

  1) reduce to a single point of failure for rack.

  (2) make good use of LACP for 2 and 4 nic server connections

  (3) use a 5224 with it's 1 lacp-> n3024s for devices of unique connection point (ie: internet router)

  TIA

  Jim...

  Barrett pointed out many of the common practices suggested for stacking. The best practice is to use a loop for stacking and distributing your LAG on multiple switches in the stack, are not specific to any brand or model of the switch. The steps described in the guides of the user or the white papers generally what is the recommended configuration.
  http://Dell.to/20sLnnc

  Many of the best practices scenarios will change of network-to-network based around what is currently plugged into the switch, and the independent networks needs / requirements of business. This has created a scenario where the default settings on a switch are pre-programmed for what is optimal for a fresh switch. Then recommended are described in detail in white papers for specific and not centralized scenarios in a single document of best practices that attempts to cover all scenarios.

  Express.ypH N-series switches are:
  -RSTP is enabled by default.
  -Green eee-mode is disabled by default.
  -Frother is enabled by default.
  -Storm control is disabled by default.

  Then these things can change based on the towed gear and needs/desires of the whole of society.

  For example, Equallogic has several guides that recommendations of configuration detail to different switches.
  http://Dell.to/1ICQhFX

  Then on the side server, you would like to look more like the OS/server role. For example a whitepaper VMware that has some network settings proposed when running VMware in an iSCSI environment.
  http://bit.LY/2ach2I7

  I suggest making a list of the technology/hardware/software, which is used on the network. Then use this list to acquire white papers for specific areas. Then use these white papers best practices in order to ensure the switch configuration is optimal for the task required by the network.

• Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looks like the manufacturer was "Total Training. I can't find the title to Adobe.com

  http://totaltraining.com/store/Photoshop-CS5-extended-Essentials/

• Practice exam... Examples of scenarios to practice

  I did some research but couldn't find an answer to what I was looking for. I've never taken a before laboratory examination, and I'm looking for what kind of expected. I would like to find examples of scenarios that I can practice in my lab. I found this preparation guideand wonder if it's a good base on what to expect in the review. I'm certainly not looking for the real exam questions. I'm simply looking for scripts that I can practice. Almost all of the guides I've read say "lab time". In fact, Duncan Epping was kind enough to say twice! I would like real-world practice scenarios if I can. Thank you

  http://sostechblog.com/2014/02/10/vcap5-DCA-links/

  has a good set of links regarding the review of the VCAP5-DCA, including two links back to the communities here: One and Two

  If you want a hands-on experience with a simulation of DCA send me a private message or find me on twitter and ask questions on the test track.

• Exam for VCAP discount code

  Hi community

  I finally made the commitment to continue my VCAP5 certification - DCA (VDCA510) . I am certified in my PCC 510 since 2011, but were lazy in going to the VCAP. But the time has come and I am committed. I'm also afraid that once VMware version version 6.0 all CERT change shortly after.
  

  I wanted to ask if anyone knew of any given exam count as each life-saving aid.

  I would appreciate if anyone can provide links or info on it.

  
  

  Also if any of you did the review recently advice or comments would be great.

  
  

  I'm hoping to take my exam in 8 weeks. I know that it will be difficult because it is only in laboratories and not to multiple questions.

  Many

  Thank you

  rushad61
  

  Hi Scott28tt

  Thanks for that. I've seen this before, but there is not any discount for review VCAP. I found a few codes of the forums, but I think they came out last year. If successful I'll post here

  Concerning

  Stephanie

• Practice exams VCP-3

  Can someone tell me where I can take (or download) the practice (mock) exams?  I was under the impression that they were on the VMware website, but have not been able to pull them up via research.

  M

  check http://mylearn.vmware.com/portals/certification/?ui=www on the right side of the page

• What is the reason for the exam for VCP 4.0

  What is the review of test patterns for VCP 4.0, how much shoud of questions we answer and how long we have in our hands?

  There is a question of 85 to 90 minutes.

  See: http://www.boche.net/blog/index.php/2009/09/05/vcp4-exam/

  For discussion, see note:

  VCP on vSphere 4 Exam scoring

  André

• Practical difficulty for a person not DBA at work.

  Hi Master,

  I'm not a DBA, but on my own db development I have access to the data dictionary. As a user reading only DBA team would be pleased to grant me access to the data dictionary for each database that we have in our workplace? I don't see no risk here as the data dictionary has all the data user anyway!

  If they become happy what command they will have to run for me to be able to see the data dictionary.

  When I say data dictionary, I mean dba_objects dba_users, user_db_columns user_source tables etc. I hope I'm right!

  Please notify.

  Thank you!

  grant select_catalog_role user;

  But probably your DBA team that already knows (or at least: you need to know), do not know why you ask here...

• AIR 16 practically unusable for iOS

  We develop games Mobile platform iOS/Android.

  Apple has recently updated its policy to deny new applications without the support of arm64, we decided to make a quick change to AIR SDK 16 in all ongoing projects.

  But as you already planned, there has been a serious * PAIN *.

  Too much trouble that cannot be dealt with by our side.

  Internal reconstruction native extensions to include symbols arm64 was almost nothing compared to the following problems:

  1 applications with native extension's ios will crash on iOS devices 7 64-bit. No work around available except throw all native extensions.

  Obviously not an option, as all our products are free-to-play games with in-app purchase. Crash report is not against the native extension code defects.

  A quarter of iOS users are still using iOS 7 - we just can't throw away them.

  2. There will be a weird behavior with TextField mode iOS landscape 8 devices. iOS text Magnifier will be strange and uncoordinated limitations.

  Although the user will be able to enter text with the software keyboard, they can actually copy and paste in (or) TextField.

  When these issues will be fixed? We are actually forced to use AIR 16 but cannot ignore these critical bugs.

  These issues are not yet addressed in AIR beta 17!

  Hello

  Thank you for reporting the issue. Could you please recheck question 1 you mentioned. This problem has been fixed in the latest beta. Other users have confirmed that the problem has been resolved.

  Re: AIR SDK 16.0.0.283 crashed into the startup time

  Kind regards

  Adobe Air Team

• Need best practices PROCESS for scheduling backups RMAN.

  Hi all

  I would like a suggestion on what follows for RMAN backups:

  Details:

  Database:-11 GR 2, size 3 TB on ASM - DW database.

  As suggestions on:

  (1) what kind of backups for plan - additional as well as backups of block?

  (2) can size necessary to allocate space for backup - one ASM or disk space?

  (3) anything else - please suggest.

  Thank you.

  Thanks Hemant, this is very useful for me - the explanation is clear and understandable.

  Thank you!

• I'm looking for 'best practices' tips for a configuration of a project (first CS5.5, Windows 7 Pro)

  I was instructed to update an old corporate video with narration, sounds, graphics and new music.

  Video camera ONLY material that I've had a DVD corporate (NTSC) - the original source material is simply not available. .

  I can rip the DVD in MPEG 2 and import it into first without problem, but I would like to be able to use resolutions higher the updated graphics.

  I intend to export it to Youtube (HD) but can export to DVD or BluRay as well.

  My question really reduced management of sequences.   I tell myself that my sequence settings must be the highest resolution, I expect to work with (Youtube HD or Bluray) which allows you to easily export to lower quality, but I don't really know if it's as simple as that.  Is there a standard method in the industry?  Am I close?

  First may actually use the DVD .vob files, just copy DVDs to hard disk, and then import in first.

  What is the DVD existing video in a 4:3 or 16:9 format? If 4:3, think about how you will work in a program of 16:9. Rather than having the black terminal on the side bars, many publishers will some sort of background to fill this space. A popular solution is to reproduce a bass track, stretch 4:3 video to fill the screen and add Gaussian blur effects. Because the colors/content of the sidebars will correspond to the main video, it's a little disguises the fact that the video is 4:3.

  If you put SD images in a HD program, it will look 'soft' compared to the HD images. As a compromise, you can consider the new edition as 720 p instead of 1080 p program, so that the SD resolution is not to be tense. All the computer video/video YouTube is not interlaced, meaning to sequences and exports should be done as Progressive.

  Flow problem of potential work - if you take the images existing SD from the DVD and it high end in a HD sequence, then export to DVD (SD resolution), the video turned into mush. She was raised, and then again once, dowscaled really kill the quality. May be required to copy the HD sequence in a sequence of SD, difficulty of the problems of size / scale of graphics and titles and DVD for the export of the sequence of SD to avoid the top of range/reduce images SD. Note that the DVD-video is highly compressed, so you already work with a weak source material, recompress again will be a hit in quality in all cases, but certainly avoid the top of range/cut again.

  I don't have Adobe apps in front of me at the moment, but I think that Blu - ray 720 p export options are limited, perhaps 720 p at 59.94 only, not sure. Which may affect your decision to 1080 p and 720 p.

  Hope these tips help you

  Thank you

  Jeff Pulera

  Safe Harbor computers

• question of the practical exam 1Z0-047 - CONNECT BY PRIOR

  Hello
  Please see the question by clicking on the link:
  
  http://S10.postimg.org/58ph01n5l/1z0_047_connectby.PNG
  
  I échinés on it (well, for a few minutes or more) because I don't think that the answers are correct.
  Option 3 is almost correct, except that in my mind the CONNECT BY PRIOR is backwards.
  Option 4 is almost correct, except it takes LEVEL < = 5 rather than LEVEL < 5.
  
  In the end, I chose option 3 because it is more certain that the LEVEL should be < = 5 I had CONNECT it BEFORE the wrong way round.
  
  Now, it so is that I chose the "correct" answer but I am mistaken on option 3? Option 3 is really correct?
  My reasoning is this: we want the ancestors of Peter. This means that Peter's parents. CONNECTION BY ParentID = PRIOR PersonID will begin at the root (Peter Clark), and the next record found (using this SQL) will have ParentID = PersonId of pre-registration, namely, of Peter Clark PersonID. In other words, Peter Clark will be parent of the next record. But we are looking for ancestors of Peter Clark; Ancestors of Peter Clark are the parents of Peter Clark. Peter Clark cannot be the parent of the ancestor (or ancestors).
  
  I'm here or not?
  
  Thank you
  Jason

  I agree with you. The connection is evil around all 4 options.
  I set up a test with grandparents etc and connect ParentId = PersonId prior only got the start record.
  Connect prior ParentId = PersonId gives the correct descent.

  create table gr (parentid integer, personID integer, name varchar2(30));
  insert into gr values (null,1,'GGG');
  insert into gr values (1,2,'GGF');
  insert into gr values (null,3,'GGM');
  insert into gr values (2,4,'GF');
  insert into gr values (4,5,'F');
  insert into gr values (5,6,'Peter');
  select * from gr order by parentid, personid;
  
    PARENTID   PERSONID NAME
  ---------- ---------- ------------------------------
           1          2 GGF
           2          4 GF
           3          4 GF
           4          5 F
           5          6 Peter
                      1 GGG
                      3 GGM
  
  select level, gr.* from GR where level <= 5
  start with name = 'Peter'
  connect by ParentId = Prior PersonId
  Order Siblings by name;
  

  Output has only Peter:

       LEVEL   PARENTID   PERSONID NAME
  ---------- ---------- ---------- ------------------------------
           1          5          6 Peter
  
  1 row selected.
  

  The reverse

  select level, gr.* from GR where level <= 5
  start with name = 'Peter'
  connect by Prior ParentId = PersonId
  Order Siblings by name;
  
       LEVEL   PARENTID   PERSONID NAME
  ---------- ---------- ---------- ------------------------------
           1          5          6 Peter
           2          4          5 F
           3          2          4 GF
           4          1          2 GGF
           5                     1 GGG
           3          3          4 GF
           4                     3 GGM
  
  7 rows selected.
  

• Best practices 4U2 for Dell OM VIB for ESXi 4.1 upgrade?

  I am about to begin the upgrade of my guests of U2 4 ESXi 4.1 and am running over old Dell OpenManage VIBs (currently v6.3) on 4U2.  However, I was wondering if there is a proper procedure for the upgrade to 4.1 and update of Dell OM VIBs.  I have not tried yet, so I n; t sure if there was a 'good' way to do to avoid problems.  The Dell site does not mention the upgrade when you install last VIB - explains just how to install.

  • Uninstall the old Dell OM VIBs before the upgrade to ESXi 4.1 and then install the most recent VIB 6.4?
  • Upgrade to 4.1 and then uninstall the old VIB, install the new version of VIB
  • Uninstall the old Dell OM VIBs before the upgrade to ESXi 4.1 and then install the most recent VIB 6.4?
  • Upgrade to 4.1 and then install the new VIB on the current

  I followed the instructions here (pretty basic) when installing the VIBs first, but I have never done an upgrade of the VIBs.  I guess my main issue is whether it is safer to uninstall and reinstall then install new or just on the top when dealing with VIBs themselves?

  Just looking to see if anyone has experience with this and maybe avoid some headaches, if things go pear shaped

  Hello.

  My experience has been uninstalling and reinstalling works better.  I would remove the VIB before the upgrade.

  Good luck!

• Best Practice network for 6 uplinks

  Can someone help me and tell me recommended for segregation with 6 uplinks. Ideally, I would like to have 2 management, 2 VMotion, 2 for Production and 2 for iSCSI (software). However I have only 6 natachasery. Recommend that people would be here when you use HA and DRS clusters?

  I would also use the iSCSI team balancing, but do not know how to set up. The SAN has two NETWORK adapters and is trucked by using 802.1ad. How to configure the load balancing across the vSwitch iSCSI to take advantage of the trunk to the SAN?

  Any help or pointers to good white papers or documentation would be really appreciated.

  Thank you

  Tony

  Hello

  I would use:

  Load Balancing: route based on the Port ID of source

  Network failover detection: State of the link only

  Notify the switches: Yes

  BACKSPACE: Yes

  Of course, it's just my opinion that's all that's right for you. You can use the probe if you want a constant pulse of your links.

  Steve