Preloader does not not on the second stage

Similar Questions

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Win XP does not recognize the second disk in the Qosmio F30

  Hello.

  You have a problem...
  After using the recovery disk WinXP MCE does not recognize! second HARD drive.

  I mean in the Device Manager it's ok I see 2 hdd... but in his only C:\ Explorer

  Utilits RAID recognize also second HARD drive.
  But I'm going to use this HARD drive not for mirorring... I need this second HARD drive as separate HARD drive.

  Could someone help me solve this problem?

  Just format the drive and make it ready for Windows to use.
  Go to control panel-> administration-> computer management tools-> Storage-> disk management

  Here you will find all the options necessary to make your second HARD drive in Windows.

• My computer does not detect the second monitor

  I just bought another monitor for my PC. My first monitor is plugged into one of the two VGA connectors at the back of the computer, and my second monitor is plugged into the second slot VGA. However, when I try to detect the second monitor does not work, and he thinks that a monitor is connected. Thanks for any help!

  Hello

  Power Off the Computer and then plug in the monitor.

  How to set up dual monitors in Windows 7
  http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/

  Two screens are better than one
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Tutorial: How to set up two monitors (Windows) - video
  http://www.YouTube.com/watch?v=YFCpaAs5s3c

  How to set up multiple monitors
  http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.html

  ==================================

  You may need to update your display and video driver

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 13 Alienware does not recognize the second ssd m2

  I just installed an ssd in m.2 ADATA in the second slot, and while the drive appears in the bios and in intel rapid storage app it does not appear in windows as a usable drive.  What I understand is the original ssd in the 'c' drive and I it does not show as a "d" or any other player.  He also appears in Device Manager as well.  What should I do to make it appear as drive "d".

  Thank you!

  Sounds like it needs to be initialized and formatted in Windows:

  http://www.overclock.NET/t/1227647/how-to-initialize-and-format-a-new-disk-for-use-in-Windows

• iframe to open the pdf on the website does not work the second time

  On my site, I use < iframe > to open the pdf in the page.

  All the links work the first time.  But if I want to choose another, nothing happens.  If I refresh the page, it turns off, then will work once again.

  I've read a lot of old post, but couldn't find a solution or work around.  Any ideas?

  Or, if it does not, then I opened it with the bookmarks already open?  Then I shouldn't be the submenu nav for each chapter.  Afraid users wouldn't know how to open the bookmark on their own.

  This is for IE.  Help, please.

  Here are some of my code

  < ul class = "" >

  " < li > < a href =" http://sharepointFiles.PDF "target ="myIframe"> REGISTER < /a > < /li > "

  " < li > < a href =" http://sharepointFiles.PDF#page=5 "target = 'myIframe' > NEW LAYOUT < /a > < /li > "

  " < li > < a href =" http://sharepoinFiles.PDF#page=7 "target ="myIframe"> < /a > < /li > DROP market "

  " < li > < a href =" http://sharepointFiles.PDF#page=9 "target = 'myIframe' > new PRICE < /a > < /li > "

  " < li > < a href =" http://sharepointFiles.PDF#page=11 "target ="myIframe"> ADDITIONAL INFORMATION REQUEST < /a > < /li > "

  < /ul >

  < div class = "w3-show" >

  < iframe src = "#" name = "myIframe" style = "width: 718px;" height: 900px; "frameBorder ="0"> < / iframe >

  < / div >

  An "iframe" isn't a product, it is a type of HTML element used to incorporate another document within a web page.

  The OP is using Adobe software, most likely, or Open PDF settings would not work for them all the...

  To answer the question: he is probably the way the file is cached by the browser. I don't know there are many, you can about this, but you can tell the Bookmarks panel to appear by default using two ways: you can use the "pagemode = bookmarks' open parameter in the URL, or you can set options for initial view of the PDF file itself to show (under file - properties - view initial - tab Navigation).

• Satellite A100-289 - does not accept the second module RAM

  Hello
  Sorry for my bad English

  I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

  [PC-information]
  Modellname Satellite A100
  TEILENUMMER PSAA9E-11H047GR
  Serial number 96304832Q
  BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
  BIOS 6.00 version
  Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

  Hello

  > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
  This means that you install RAM modules while the laptop is running?
  I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

  Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
  I have good experiences with the Kingston modules.

• Adding an event does not add the JavaScript code to the code automatically window

  I'm learning to animate Adobe classroom in a book (among others).  The lesson says to add an event to the timeline.  I click the icon "open stock" ({}) to the beginning of the row on the timeline for the item that I want to add an action.  The edit window appears.  I click on "mouseover", and only a comment is added to the window instead of the Javascript code.  I have to enter the code manually.  Animate is no longer does this in the code window actions?

  Note that the second stage ("choose a target") is required to automatically add the code.

  You must select an object, and then click Enter.

• OfficeJet Pro 8600 does not recognize the 2nd paper tray

  I've set up the 2nd tray in system preferences by checking the box for an additional tray, although it seems sometimes to uncheck because when I go back to it is checked, it is not. Somewhere I found the Source setting and I saw 2 trays, but now I don't remember where it was to check again. However, when I try to use the parameters to define a default tray and lock in the status bar on the printer itself, it simply does not list the second set as being there. So there is nothing to choose or define. At one point, even though I didn't click to print, it seemed as if he was going to print something but then says there is more paper in the tray. But there was.

  I am on an iMac 10.8.5 OS and just bought this printer. I connected with ethernet.

  Hello

  I ask you to try the procedure described in the following link:

  http://support.HP.com/us-en/document/c03160525

  Although I am an employee of HP, I speak for myself and not for HP.

  　

  Say thank you by clicking on the "Bravo!" Star"who is on the left
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem

  　

  Kind regards

  Ray

• My preloader does not appear on-screen Flash3 AS2

  I have a preloader in fist of my film. My film has kid films (photo galleries). Here is the swf files that are related to the main sequence. When I simulate the download, the preloader does not show the fist of 50% load time. Then it comes and works very well. I went the charger in the library. Under links, I clicked EXPORT and uncheked "export in first frame". It did not work. I still have the same problem. Can someone help me. I use Flash 3 Action Script 2
  
  In addition, when I simulate my photo galleries that are related to the main loading sequence are not displayed. This is the code that I use for the preloader:
  
  Stop();
  LoaderInt is setInterval (toolbar, 10);.
  toolbar function () {}
  {if (getBytesLoaded () > = {getBytesTotal())}
  Play();
  clearInterval (LoaderInt);
  }
  fill_MC._xscale = (getBytesLoaded () /getBytesTotal () * 100);
  }
  
  What I am doing wrong?
  Thanks for any help you can give me. I'd really appreciate it.

  Post edited by: Nununa

  Are you asking why your preloader starts at 5%?

  (if so, years: because you have an integrated police - possibly in percentInst - you always export something in frame 1 or objects in frame 1 of your swf file are about 5% of your total swf)

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

  I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

  Please see: error of incorrect serial number

  I hope this helps.

  Concerning

  Megha Rawat

• I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

  Hi phillipt84805120,

  Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

  Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

  Let me know if you are still having a problem.

  Kind regards

  Nicos