Preparation configure Windows not to turn off your computer

Similar Questions

• Cannot start Toshiba C50 all I get is "preparing to configure Windows not to turn off your computer.

  Original title: startup

  When Toshiba C50 starting all I get is "prepare to set up Windows do not turn off your computer" I let it run all night, but always the same screen morning

  Hi John,.

  Thanks for posting the request in Microsoft Community Forums.

  You remember the updates that you installed recently?

  This problem normally occurs when updates could not set up within the system. It can also occur if there is no third-party program conflicts.

  To resolve this problem, use the following methods, starting with the first method below. If it solves your problem, click on the following method.

  Note: Do not restore/update system for the moment.

  We will try to put the operating system of this situation and then try to install the updates in the clean boot state. You also try to run the Windows Update Troubleshooter to see if that helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Warning: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Hope this information helps. Response with status so that we can help you.

• "Failure update of windows, changes in recovery configuration please don't turn off your computer"

  Original title:

  Failure configuring windows update

  HELLO, after my installation of microsoft office 2010, my laptop was forcing me to restart, and after I restarted ot I received a message that says "failure configuration windows update, changes in recovery please do not turn off your computer" I've bee waiting for 2 hours and it will remain the same, when I turn off my laptop and put on again keep showing once again , so I can't log on windows. No idea how to solve this problem? Thank you for the help

  Hello Stefan,

  You can try the steps from the following link and check if that helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  I hope this helps. Poster with the exit status.

• Preparation configure windows do not turn off your computer

  When I start my computer, a message will come on indicating ' preparation set up windows do not.
  Turn off your computer. This process continues and does not set up, so I start in safe mode. How can I correct this situation?

  Hello

  This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system.

  ·        What are the updates that you try to install on the system?

  ·        What operating system do you use?

  Method 1:

  As you said that you are able to boot into safe mode. I suggest you to uninstall the updates that are installed on the system. Follow the steps mentioned below.

  a. start in safe mode, and then click the start menu.

  b. type Windows updates in the start search box and press ENTER.

  c. click View update History and click install updates.

  d. click on the updates that are installed on the system and click on uninstall.

  e. before uninstalling the updates, make a note of the KB number and let us know what updates you are trying to install on the system.

  f. now check if you are able to boot to the desktop.

  See the article mentioned below.

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  If this does not help, then follow method 2.

  Method 2:

  I suggest you do a system restore to a previous point where the system worked very well. Follow the steps mentioned in the article below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Failure to configure Windows updates, changes to restore, do not turn off your computer.

  I had this problem for about 3 hours now.

  I have a laptop called Lenovo G580, before it all went past, he had to restart while I was navigating apps send me 14 minutes to prepare.

  And then it goes up to (15%)? Then gave me the problem "configuration of the windows updates failed, restore changes. Do not turn off your computer "

  It took a while, so I had to turn it off, but he returned to the screen, same problem all the time. It does change a bit.

  It restarted once but it comes back to the same problem

  I'm not sure what I can do, I just leave and wait until the early morning hours or y at - it a specific solution for this or anything like that?

  Help please!

  Start here: http://support.microsoft.com/kb/949358

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• Error message: "Preparation set up windows, do not turn off your computer" when to stop the system.

  Original title: closure of the problem

  Almost everytime I turn off my laptop, I get the message ' Preparation set up windows, do not turn off your computer . Then it takes forever to finally stop. Suggestions for this problem?.

  Hi ArthurCosford,

  This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system.

  Step 1:

  You can check the windows updates history to discover updates recently and failed to install.

  For more information, you can consult the following article:

  See the Windows updates are installed

  Step 2:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• "Preparation set up Windows. Do not turn off your computer"can't NOT GET PAST!

  I have windows 7, and once everything was loaded, she wanted to make a few updates
  I stopped him so he can make and it's updated 33/42 for 2 hours before I gave up and restarted

  now it is stuck on "preparing to set up Windows. Do not turn off your computer.

  Help!

  Hi Gronfors,

  Try to start the computer in safe mode do a system restore and check if it works very well.

  To start in safe mode follow the link given below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to boot to the desktop in mode safe mode try Method 1 if one does not work follow method 2.

  Method 1:

  Navigate to the specified location and delete the files, and then try to boot into normal mode

  c:\windows\winsxs\reboot. XML

  c:\windows\winsxs\pending. XML

  Once you boot to normal mode try to install the updates one by one and check if Windows update terminates the process.

  Method 2:

  If the above given step does not work try it to perform a restore of the system in safe mode and check if that helps. Follow the steps below.

  You can perform a restore of the system on the computer to restore the previous settings again.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Once the system restore try to boot to the desktop in normal mode and check if updates work fine. Try to install the updates one at a time.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Default configuration Windows update restore changes do not turn off your computer.

  I'm running 64-bit Windows 8

  Guard saying default configuration of folds by using Windows Update

  Hi Cris,

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to start the computer successfully after following article provided above, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store