Preparation for making links

Similar Questions

• Windows install... Preparation for installation

  I can't open my documents, Word or Excel... with a pop-up box saying Windows Installer... preparing for installation.

  So of course nothing happens...

  then another pop up box says... This patch Package could not be opened.

                                                         Verify that the hotfix package excists and you can access them

                                                         or contact the application vendor to verify that this is a valid Windows Installer patch package.

  I hope someone can help with advice and or a link to help me solve this problem, because it drives me crazy.

  Looking forward to responses and I hope to get this problem fixed.

  Salvation is n,.
   
  Follow the steps listed in this article to resolve the problem:
  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "the installation source for the product is not available.

• MSI - preparation for installation message appears when Internet Explorer is opened

  Original title: windows setup

  whenever I have open internet explorer, a small 'windows install... preparation for installing' window.  I downloa ded windows install 4.5, but no abail. Any suggestions would be greatly appeciated. Thank you. Ric

  Hello

  ·        This occurs only when you click on internet explore or with all applications?

  ·        Remember to make changes to the system?

  ·        What version of internet explore is installed on the system?

  I suggest you follow the methods mentioned below.

   

  Method 1:

  I suggest you unregister and re-register the Windows Installer on the system.

  a. sign in to your computer as an administrator.

  b. Click Start and then click Run.

  (c) in the Open box, type cmd and then click OK.

  d. at the command prompt, type msiexec.exe / unregister and then press ENTER.

  e. type msiexec/regserver, and then press ENTER.

  Now, check if the problem is resolved.

  Method 2:

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.

  http://support.Microsoft.com/kb/322756

   

  I suggest you repair Windows Installer

  a. Click Start, go to run, type "Regedit" and press ENTER.

  b. in the registry editor, navigate to the following registry folder:

  'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer' by clicking on the sign MORE (+) sign.

  c. highlight the "MSIServer" folder in the left pane and double-click "ImagePath" on the item in the right pane.

  d. its value should be 'C:\Windows\System32\msiexec.exe V' (without the quotes). If this is not the case, change the above value.

  Note: There is a space between msiexec.exe and c I assume that Windows is installed on drive C.

  e. restart your computer.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• device disappeared from the system without first be prepared for removal. __

  The following error message has appeard in the event where the journal and I can't find my wireless network device. Driver has been reinstalled with no success. This means that the material is not? Error message is:

  The device "LAN-Express AS IEEE 802.11 g PCI-E adapt ' (PCI\VEN_168C & DEV_001C & SUBSYS_E000105B & REV_01\4 & d69bda5 & 0 & 00E2) disappeared from the system without first be prepared for removal."

  
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Folders pro XP on Vista pc cause conflicts for D-Link Rangebooster desktop adapter

  Your desktop HP hand gave a blue screen with message virus in trunk upwards. So... after a lot of trial and error and reading MS support Info for the error message I was able to do the system recovery and took it back to the factory settings. But in this process, I tried to start with a new XP pro disk I had. Therefore, I'm done with XP loaded on Vista system files. When I tried to do on the internet it seemed to be a problem with the wireless network adapter, which prevented the system startup completely. Then... I deleted the wireless network card drivers and that's fine. But... now I can't on line wireless and the computer isn't near a network cable. I think if I could remove the XP files I might be able to install the drivers for D-Link.  Of course, I am able to get me in trouble, but not enough knowledge to get out me. I thought that another solution would be to get rid of Vista and install XP pro, but I don't know if this is possible. MS.com does not seem to give instructions for the classification.

  A third alternative: I ordered a copy of the system 7 before its release to put on my HP laptop. I was preparing to upgrade when the laptop was stolen along with the disc in the DVD player. I still have the 64-bit disk. I tried to ask MS.com if there was no way to check and see if the 32-bit original license was used, but I can't access the ID of product without the disc. The # does not appear on the label of Authenticity on the box. Any idea where I might be able to access so I can at least ask about the license?

  You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I'm sorry, but we don't know what XP files you have installed.

  My original advice stands: Reinstall Vista.

  And I also advise you how to get replacement software:

  "laptop was stolen along with the disc in the DVD drive '

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2014-02-25_01-35-08 PM. Please wait... Error in CreateOUIProcess(): 13: permission denied

  Hi all

  Im getting below error when installing on RHEL 6 12

  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2014-02-25_01-35-08 PM. Please wait... Error in CreateOUIProcess(): 13
  : Permission denied

  I got permission to

  mkdir Pei /u01/app/oracle/product/12.1.0/db_1

  chown-r oracle: oinstall/U01

  chmod-r 775/U01

  
  

  permission on temp
  

  drwxrwxrwt. 9 root root 4096/tmp

  
  

  Bash profile

  
  

  export TMP = / tmp
  export TMPDIR = $TMP
  export ORACLE_HOME=/u01/app/oracle/product/12.1.0/db_1
  export ORACLE_BASE = / u01/app/oracle
  export ORACLE_SID = BDEV
  export PATH = $ORACLE_HOME/bin: $PATH
  #export PATH = $ORACLE_HOME/OPatch: $PATH
  export LD_LIBRARY_PATH = $ORACLE_HOME/lib: / lib: / usr/lib
  Export CLASSPATH = $ORACLE_HOME/jlib: $ORACLE_HOME/rdbms/jlib

  The link refers to the TEMP variable as so defined.

  I think you would have to remove and back up/tmp at all the less for the new permissions to take effect.  I would not have thought that it is a dynamic change that takes effect by simply changing the file.

• Preparation for VCP4

  Hi guys,.

  I donr with my vSphere4: ICM yesterday and should prepare for the certification, I intend to follow religiously all that is in the master plan, which is just enough (maximum configuration including). Please notify.

  Arun N

  The formal action plan is available at:

  http://myLearn.VMware.com/LCMS/mL_faq/2726/VCPonvSphere4ExamBlueprint.PDF

  A very good version with study notes:

  http://www.simonlong.co.uk/blog/VCP-vSphere-upgrade-study-notes/

  http://professionalvmware.com/category/VCP/

  VCP4 exam review

  Official model for VCP4 exam:

  http://myLearn.VMware.com/quiz.cfm?item=15211

  But there are practical examinations of SimonLong:

  http://www.simonlong.co.uk/blog/VCP-vSphere-4-practice-exam/

  And also notes Scott:

  http://vmwaretraining.blogspot.com/2009/09/studying-for-VCP-on-vSphere-4.html

  Official documentation:

  http://www.VMware.com/support/pubs/vs_pages/vsp_pubs_esx40_vc40.html

  Other useful links:

  Book of VMware vSphere 4.0 training

  http://vmwaretraining.blogspot.com/2009/09/studying-for-VCP-on-vSphere-4.html

  http://www.vreference.com/vSphere4-notes/

  And do a lot of laboratory to test all the features

  André

• How can I stop Firefox opening iTunes or ask me which application I want to use for the links from the itms/itmss?

  When I opened iTunes App Store link, Firefox wants to automatically open iTunes. In Options > Applications, I found the itms and itmss content types, which causes this behavior. I can change "always ask them", but when I do, I get a automatic every time I open the link asking me to choose between "iTunes" or "Choosing an Application." To avoid future pop ups, I check "Remember my choice for itmss links" but only after selecting iTunes or another application. There should be a third option there for 'doing nothing '. Is it possible to tell Firefox to ignore completely the content of the itms/itmss?

  COR - el said

  Is there some prefs the protocol handler if you are looking for the topic: config page?

  • Network.protocol - handler.

  You just solved my problem - there is no Network.protocol - handler.external. itms or itmss prefs, so I added the Boolean values:

  Network.protocol - handler.external.itms
  Network.protocol - handler.external.itmss

  Set to false and voila! No iTunes, don't ask me what program to use.

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• How to disable notification "e-mail % has already been added as an application for mailto links"? Its popping up whenever I connect.

  I am constantly this message and it quite disturbing. Please, help me to turn it off.
  What I found in Google is this link, and there is no answer.

  http://StackOverflow.com/questions/8415394/how-was-add-application-for-mailto-links-enabled-in-Firefox

  Message is:
  E-mail % has already been added as an application for mailto links

  Hello

  Sorry for this problem, it is very annoying sound! This occurs whenever you try to click on a link of e-mail on the Web sites, or is it at other times? It seems that there is a problem with the default mail client specified in Firefox. The first think you should do is verify that the e-mail client that you are using is indeed defined as the default system. Depending on the client you use, this could be done in a number of different ways.

  The other thing you could try is to reset Firefox, which restores the common Firefox settings that can cause problems. Don't worry, you won't lose your bookmarks saved, passwords and other important things, but it will restore all the other settings, leaving you with a fresh start.

  If you think something would open to try, here are the instructions: Refresh Firefox – reset the parameters and modules

  Please let me know if this solves the problem, so I can check this off my list of todo - or please let me know if you need help, and I'll have to do this new sort it out for you!

  Thank you
  David

• Time Machine is constantly preparing for backup.

  I use my iOmega external hard drive to back up my Mac Pro for the past 5 years.  Now, all of a sudden, he is constantly preparing for backup.  Any suggestion of back me to normal will be appreciated.

  Try:

  http://pondini.org/TM/D1.html

  Stuck in the "Preparation" or "calculating the change."

• Please allow me to download drivers for laptop links

  Please allow me to download drivers for laptop links

  It has:

  G6 124se

  Hello:

  Here is the link to the support page and drivers for your laptop:

  http://support.HP.com/us-en/product/HP-Pavilion-G6-1200-notebook-PC-series/5145704/model/5170288/drivers

• How should I prepare for El Capitan 10.11.2?

  Hi all

  As the title asks, how should I prepare for this upgrade?

  I had already installed El Capitan 10.11.0, but quickly returned to 10.10.5 after discovering several problems:

  1 (2 x 1 x POP, IMAP) e-mail accounts - problems with lack of mailboxes, mail lost, unable to send mail, etc.

  2. Time Machine backups were not held as scheduled when my iMac end of 2013 has been plugged into my ups APC.

  3. casual does not recognize my USB Superdrive.

  After the restoration of my old system of Time Machine, I followed several thread on these forums to see what others have experienced with the 10.11.2 release.

  My iMac does not have any third-party software with the exception of my HP ENVY 4502 print utility.

  How should other ensuring that Time Machine backs up current, I prepare for this facility to ensure that I do not lose important emails from my accounts {2 x iCould (IMAP) and Comcast (POP3) 1 x}?

  You know, honestly until that Apple's software team act together and reflection on the QUALITY rather than pretty flowers I'd wait for a few weeks to a month.  Or, at least until more people have put to date to see if there are problems.

  So, to answer your question, make sure you have at least 2 strong BACKUPS before you update.

• Ask for a link for Labview 2011 SP1

  I ask for the link to download the Labview 2011 SP1.

  I have a bug that corrects SP1 (damaged Panel before, cannot open vi, see the discussion http://forums.ni.com/t5/LabVIEW/LabVIEW-load-error-code-3-Could-not-load-front-panel/td-p/1895379/pa...), but the download link disappeared.

  Please, if anyone knows tell me the link to download (32 bit).

  I found it here

  http://download.NI.com/support/softlib/LabVIEW/labview_development_system/2011%20SP1/

  Anyway, there are a few problems with the link that you gave to me. I thank you all the same because what is happening is somethink wronk with national instruments site, which is not the same for all countries (web designers should check and fix the bug).

• How the 'registration' identity can be removed when a computer prepares for recycling?

  How the 'registration' identity can be removed when a computer prepares for recycling?  I'll give my old PC for a facility that reconditions them.  I removed almost everything that could lead to my identity used but I've not found a way to change or remove the name that the software is registered.   Any ideas?   Also how hard disk would be restructured uning windows home?

  Boot from your WIndows installation CD-ROM.  You will be able to erase the hard drive from there.