Presario CQ 62: Code disabled

Similar Questions

• Presario cq57: System to disable the code

  I have presario cq57 gives disable me the code 78432038

  Trying to access bios to remove passwords

  Try loader.

  67590018

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP Compaq Presario CQ57: Compaq Presario CQ57 - 310SD BIOS disabled system password

  Hello

  I have a laptop HP Compaq Presario CQ57-310SD and tried to reinstall Windows.

  but I can't boot from CD/DVD, just the HARD drive and USB key appears in the F9 menu.

  I tried to log in to the BIOS (with F10) to check the settings, but I forgot the BIOS password.

  After the 3rd wrong password, the bios unlocked.

  System disabled
  55212081

  Help, please.

  Thank you.

  Hello.

  Try the following code:

  InsydeH2O BIOS (Acer, HP) 40170007

  You can also use password unlocker:

  https://www.BIOS-PW.org/

  Kind regards.

• Presario cq60-430SA: System disabled [05006]

  I received a cq60 and when lit from that bios starts to load it emits the sound warning and request password (which I don't have) and after that 3 tests see the message 'system disabled [05006]' is because he needs a bios password? can it be reset. ?

  You are the very welcome.

  Unfortunately, I don't have any specific instructions to clear the password BIOS on your model, but on this forum I have read posts from some HP employees who volunteer their time here and they provided this general direction.

  Use your password to access the BIOS to unlock

  Go to the Security menu

  Disable all passwords that are enabled

  If the demand for current password - type your unlock code.

  New password, simply press the ENTER key
  Repeat the same thing to check the password column.

  Then exit the BIOS saving & output option to save the changes.

  If this does not work, I recommend that to start a new post asking for instructions on how to reset the BIOS password.

  Indicate that you have the unlock code to get into the BIOS, you want the instructions to remove the BIOS password so that you do not need to enter the unlock code, every time you turn on the PC.

• Presario CQ56: administrator code

  Can my code to disable 64766794, I please have the code administrator? Please
  Thank you

  Hello

  Enter 71644310

  Kind regards

  DP - K

• Hp250g4: Code disabled

  Hi can anyone help me please I have a hp250g4 with the good old disabled code (85919277) I would be so grateful to anyone who could help me please there my computer to school and IV been kicked out coz of not in contact with them, everything is on the lap top thanks a.j.

  @Nads78

  Enter 30671879

  Kind regards

  DP - K

• Presario CQ57-339wm: System disabled, the bios password removal?

  Hello

  I was wondering if someone can help me, I took laptop to my son to be online too, and it has a protection of password from the bios that he will just give me.

  I would like to know if there is a way to remove this password.

  The laptop is a presario CQ57-339wm and it gives me a message that says "system disabled 63245304.

  Thank you in advance.

  Hello:

  Please read the first post on the link below, which should solve your dilemma.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• Compaq Presario SR2010NX beep code error starting: longbeeppausecontinuinglongbeepspausebetweeneach

  Hello.  My Compaq Presario Desktop PC SR2010NX of 2006 began just not start.  It gives me a sound code of long beeps that accompany pause after each beep and continue indefinitely.  I have tried convenience cheques, and it looks as if it was the 'memory '.  My question, FEI's memory, what cards are hardware compatible with my PC.  I had a breakdown.    to install a new set of 2 GB cards in July - and I had technicians immediately reinstall my old 2 cards (issued factory) replacement cards they have advised me to buy are not compatible, and when I went to pick up my computer, the computer would not start.  I have askede to reinstall my old cards and the computer booted suceesfully, and I left the store!  I am sure that I do not know what new products could be compatible with my old PC.  I thhink 4 GB is too myuch for my computer, and he couldn't get half that - but what brand should be like new hardwrae?  I wasn't expecting my old cards fail when they were resettled - three months since the change of memory attempt - thre months they started normally.  They have been re-hurriedly harnessed and dismissed the case, and then I left the store.  (The tech threatedned me with fear of "motherboard failure", which just made get the computer and leave immediately.  The old cards cannot have been relocated safely.  I'm taking it - but I will not be pushed around.  Of course - as old as mine PC would gradually motherboard failure.  Until it fails.  It was the memory card, but what woud cards my PC take that would be accepted as new hardware and allow my PC to boot up normally, if it is the cards and not yet the motherboard?

  I have now read the post with indicator on the upgrade memory.  It was very useful, and I wrote notes for the Presario.

  It says, maximusmis 2 GB to 1 GB cards/no stamped with the form of the data of motherboard page.

  It is divided between 2 cards 512 MB factory.  It has only 2 slots.

  Thank you.  My Compaq desktop computer has grown on me.  I got Vista bfore and I didn't know what I think.  If it can be repaired, I think 8 years (purchase date 4 November 2006) were fun for the low-end model.  It was a good choice, and I have never regretted buying at what cost.  It was better than expected.

  I haven't used my Compaq Presario continually over the past eight years - that's why it lasted so long!  Dud ut do work, however.  I had retirement is put online last year

  I liked HP Photosmart first 6.5 photo editing.  I liked Wordpad.  Mechanically, it was scientifically.  The material began to go when the built-in CD/DVD internal drive has failed.  I bought and had a replacement (DVD player (cd) internal HP) installed in July 2014.

  The new internal DVD writer HP compatible service pack XP? I have SP2) - I don't think it's about compatible new material.  This caused unable to start new businesses after three months?  New feature of device recognistion and old motherboard? Don't know?  (short circuit)?  I left the old CD/DVD recorder factory in its case - it's there and the springs are working to open and close the casing and check it / A short?  Don't know anything about electric

  Another point, when the original memory card 512 MB on factory 2 cards have been resettled, he was press-technicians to get the computer to boot - so the computer's case has been closed.   (I took the PC on their part awqay as fast it was closed upward).  I thought safe in maintaining clips?  Maybe not securely harnessed.  Could also be from the old factory of 512 memory cards in each clip spare wedge - to alternate which card and which support clip.  I have not tried this or re-cutting to the place of repair.  (I do not have any technical installation and not have ny contact danger here - I do not touch the computer).  It is the matter of repair - these people in a hurry, they sell - they tell you something will work, they overtest, they overdiagnose - they push you autour-yyou never recover your computer to use as is - it is disturbing to go, if you are not a consumer savvy or technical.

  May not be able to take new material old = change motherboard in chipsets, etcs. features.

  Ialso had an error saying years only. IPC Port would not work.  (. COMI is the base model for the CPA called Palm Zire Hotsync Manager.  I don't think the Palm Zire software uninstalled iI, and the message is a (!) origin unknown error message is:. COMI, has failed to initialize.  It's a pop-up error message appeared during the startup process.  The repair people off the message.  The boot has been at once - disconnect - the plugin twice and electric start.  It was based on the plug in the socket, removed and reconnected before the start =.  Technicians tried to solve this problem, but it is not important from my point of view.  All of those, cumulatively, could be symptoms of a hardware change progressive until the end of the use of PC - they are all could be chips card mother falling out or something there (the CD player, the.) Port COMI - don't know about the real, even if start program - which can only be that.)

  I tried the power reset function discussed in the Troubleshooting Online Web pages - 5 seconds to reset, / 15 seconds to reset - power off (unplugged) and hold the power button / stop without plug-in for 5 or 15 seconds (depends on the Web page of the online manual!)  Once, after an attempt to reset of fifteen seconds, the computer has no beep, and he almost made a second rumble noise - but then no change afterwards.  The redonnee start-up sound code beep after that the computer was turned off and then restarted again.

  PC is sitting in his corner.  I don't want someone break while I think about what to do.  He's going nowhere right now.

  This is the first time, it would not start.  I am a bit worried and disappointed, but, I know that my PC is old, and one day, it will fail to work.  That is the reality.  If it fi fixable, I'm interested to hear about the fit-it.  Thanks again.

  Hello @lliil,

  I read what you posted and it seems that you have a hardware problem with your computer. The only thing I can do for you is to provide you with the HP support document: BIOS Beep Codes, which will help you to correctly identify what's wrong with your computer. Given the age of the computer apart from this if you want to know if it can be fixed, I recommend do you get into a local computer repair shop and let them take a look.

  I hope I helped. Thanks for posting on the HP Forums. Have a great day!

• Compaq Presario CQ42: Synaptics Touchpad disabled in advanced settings for other users

  Hello

  I have three in my Compaq Presario CQ-42 user profiles, an administrator and others are "user".

  When I fisrt lives the synaptics touch settings window buffer through my first profile "User" 1, in the properties of the mouse-> device-> Synaptics LuxPad V7.4-> settings settings, all the options in this window were available for selection and nobody has been disabled. Now when I go to 'Administrator' profile, some of the options in this window settings are disabled, and seem to be partly hidden. As the option 'Enable the Pinch Zoom in the Pinch Zoom section' and 'Activate Pivot spin turn' seems to be hidden/disabled. To check this, I created the other profile of 'Other users' 2, but without success, and I found the same problem here too. I also tried to uninstall the synaptics driver several times of all profiles, but every time I have re-installed and checked to get the same result. The parameters were only available for the 'User' 1 profile every time and disable for profile administrator and "User 2" profile.

  I can produce the same shots if necessary.

  Please help me to get the solution because I'm very addicted to advanced by synaptics settings.

  Hello Dishat, welcome to the Forums of HP.

  It seems that you need to activate the advanced settings of your touchpad on your laptop, you are only able to do this in a profile, as in the other some options are grayed out. I will try to help you with this.

  To help you more effectively on this issue, could you please provide the following:

  The operating system currently installed on your laptop.
  Model and product numbers on your laptop.

  In the meantime, see if it can help you all: use and configure the TouchPad (Windows 7 and Vista).

  Thanks for posting on the HP Forums.

• Update of IOS 10 - code & disabled fingerprint

  Everyone has updated to the new IOS10?

  I'm running a new iPad Pro 9.7 128 GB

  I've just updated to IOS10

  Once completed, I went through the new welcome.

  My iPad locked after leaving for a minute, I don't then he went to unlock it, you say, click on the home button to open

  no code for access or fingerprints fingerprint scanning required.

  I went into the settings and password enabled, it is enabled. (he asked me for the password to access this function)

  I've seen the scans of fingerprints, they were always there.

  Then, I deleted two fingerprints and remove the password.

  I rebooted my iPad and then returned in parameters and activated the access code and added fingerprints

  I blocked my iPad.

  Then I pressed the home button to turn it on so I could unlock.

  He then said press the home button to unlock, no code for access or fingerprints fingerprint scanning not required.

  This is an issue that has been neglected on the new IOS10?

  Do you use the fingerprint which is recorded on the iPad?

  Thought I had the same problem. Tried a different fingerprint that is not registered and it could raise the access code. Took, the home button is automatically recognizing the characters of the figure.

  Interesting what others have to say.

• clear my bios administrator password for compaq presario CQ62 (my code 63859453

  pleaase help (my code 63859453)

  Hello

  Please try:

  72731495

  Kind regards.

• Compaq presario cq50: Enabling Execute Disable bit

  Since I have a 64-bit processor, I want to do a clean install of Windows 64-bit 10.

  According to this Web page, I have to first enable the Execute Disable bit in the BIOS.

  When you try to do, I couldn't find the option.

  I then looked my processor (Pentium (r) Dual-Core CPU T4300 2.10 GHz) and was directed to this Web page.

  As you can see, the table shows that the Execute Disable Bit feature is provided with this processor.

  After reading this, I went into the BIOS and looked through each menu and submenu and still cannot find the option.

  My current version of BIOS is F.65, which is the latest version of the BIOS for my computer, according to this page for Windows 7 drivers.

  Does anyone know why activate option Execute Disable is not available for me?

  Thank you

  EDIT

  This page someone explains how to see if XD is activated. I did, and that's what my current settings are:

  

  This means that the Execute Disable Bit feature is currently enabled for my PC?

  DEP is enabled in your screenshot and is very probably enabled by default in the bios, even if you don't see the setting, you should be good to go.

• Presario cq61: Compaq Presario CQ56-219WM system disabled

  Yes I booted up my Compaq presario cq61 and it askedvme a key administrator password it gives me is that 68487177 I do all my work on this computer could someone please help

  @joelucas311978

  Enter 77585179

  Kind regards

  DP - K

• Hard drive Presario C500 error code

  This PC does more boot in Windows XP. More telling symptom is the BIOS self-test does not work, «Fail #2-07» HARD drive

  What does that mean and is it salvageable?

  Mike.

  Hello

  The error code indicates that the hard drive is failing and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

• HP 15-f272wm: I have a code disabled 93281965.

  Help, please!

  Hello

  Come in:

  22189361