Presario F500 CTO Notebook no wireless network

Similar Questions

• HP Pavilion 15 t-n200 CTO Notebook PC wireless driver for networking

  Hello

  I searched for the adapters for the PC HP Pavilion 15 t-n200 CTO Notebook wireless network.  All I can find is the CD that I have to order on HP.com

  I found similar responses from others but when I click on links, the links are unavaiable.  Any help would be greatly appreciated.

  Here is a link I followed, but could not get the link to work.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Pavilion-15T-N200-Windows-7-64-...

  Thank you

  Mike

  You are the very welcome, Mike:

  Here are the drivers you need...

  First install the smbus controller driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  Network controller:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_134477_1

  PCI device:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_133237_1&swEnvOid=4058

  USB controller:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_133397_1&swEnvOid=4058

  Unknown device:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_132986_1&swEnvOid=4058

• Audio/Sound Driver for Compaq Presario C700 CTO Notebook PC

  I use WindowXP Professional SP2. After the new formatting of the partition, there is no set up to complete driver for Audio/Sound. What should I do?

  Please make sure that MS - UAA has been installed correctly

  How?

  Go into the system so devices Device Manager MS UAA installed correctly.
  There should be a list of Bus Microsoft UAA for High Definition Audio driver.
  If not, you should have a PCI card with yellow!

  Right click it and update driver,
  Not to connect, not to search and last install automatically.

  Use the driver below and if it does not try to force install it

  Conexant High Definition SmartAudio 221 drivers (ModelC700, Vx5xx series and dvx5xx and ABOVE )

  Pilot modded by money here
  Unzip it to a folder... Use the device, right click "Audio Device on HD" Manager, choose Update driver,
  Not to connect, install from a list or specific location,
  Select don't search, I will choose the driver to install.
  For the hardware Type select 'show all devices '.
  Remove control "Show compatible hardware" and click on 'disk '.
  Next... Navigate to the unzipped folder and choose the "WiSVHe5.inf".
  Ignore XP when he complains, Reboot.

• Satellite Pro A10 (PSA15E) - no card after replacing HARD drive wireless network

  Hello

  just a spare hard drive was fitted by an expert, all drivers and update of the BIOS installed on the site of Toshiba, but my wireless network card does not work.
  When I try to connect via a router it says that the card is disconnected?

  I went into Device Manager and of what follows is listed under devices Details ld:
  PCI\VEN_10B7 & DEV_6001 & SUBSYS_600110B7 & REV_01\5 & 36 D 029F7 & 0058F0

  Can someone please tell me which card is installed and where / how do get me to it.
  I don't understand how it can be unplugged?

  I use a 3com officeconnect wireless 11g PC Card which works fine until the hard drive failed.

  Help, please... I am due to go to the hospital Monday and I wish I could take it with me.

  Thank you

  Hello

  Sorry if I write this too late. :(

  He's old enough for laptop and I don't know with certainty what is the card inside, but all notebooks with wireless network inside card have a small stick of Wi - Fi at the bottom with number of WLAN card. Using this number in Google, you can identify the card.

  Anyway, there is not a lot of possibilities because on the Toshiba support page there are two WLAN drivers listed for your model of laptop. Try to install both of them. One of them must be good.

  Good luck!

• Compaq Presario C700 CTO - blue screen drivers/events/mode RAID or AHCI?

  Hello

  I need to know if my PC Compaq Presario C700 CTO Notebook is running in RAID or AHCI mode because of problems with a driver Intel Matrix Storage Manager (IMSM).  The Read Me text file in the menu start > all programs > intel Matrix Storage Manager folder said if my system works in RAID or AHCI mode determines if my computer needs this driver.

  For the past month, my computer stops and restarts with a blue screen and message when the desktop appears as a message. (The blue screen does not last long enough to read.)  The message is always the same except one I had yesterday which is described at the end of this post.

  "Windows has stopped unexpectedly. '.  The details are:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\Mini062513-01.dmp
  C:\Users\Dawna\AppData\Local\Temp\WER-48001-0.SysData.XML
  C:\Users\Dawna\AppData\Local\Temp\WERE54F.tmp.version.txt

  A solution:

  Problem with the Intel IMSM driver.

  Intel IMSM driver has stopped working properly.

  Press or click on to download the update on the site of ASUS computer.

  I several times installed upgrading after the blue screen event ever.  The download is an application called V8.9.2.1002_logo_Win7Vista3264.exe.

  The Intel Matrix Storage Manager driver is not in the list of devices in Device Manager > show hidden devices.  I found information on the HP site indicating how do I know if my computer has the driver, because I thought that maybe it has not been installed correctly.  I found the Intel Matrix Storage Manager program folder in the start menu > new programs.  I can't know what version it is.  Reading tells Me to text file in the folder to open the Device Manager and search for specific controllers SATA RAID and SATA AHCI controllers.  If not in the list then it appears that my OS is not running in two modes.  I can't find these devices in the list, but the Read Me text file advises me to contact the manufacturer in case of doubt.  My warranty has expired, so I'm here asking for help.

  When I use the HP product detection analysis to try to automatically scan for driver updates, it reads my product incorrectly.   Running the tool has sometimes followed by a crash and blue screen.

  I do not remember the changes that I made at the time when the events of the blue screen started to happen.  There was an event yesterday blue screen and the message on the desk said a problem with the HP Recovery Manager and backup.   He advised me to install an update from the HP website.  The link did not open so I downloaded the version 4.0.100.1189sp39296.exe of HP update.  I've also updated my graphics driver.

  I would be grateful if someone could help me solve this problem.   I'm worried about damaging my computer.

  Dawna

  HP Compaq Presario C700 CTO Notebook PC
  OS 32-bit of Windows Vista Home Premium Service Pack 2
  x-86 based PC
  SM BIOS version 2.4
  Physical memory (RAM) installed 2.00 GB
  Total physical memory 1.99 GB
  866 MB available physical memory
  4.22 GB total virtual memory
  2.69 GB available virtual memory
  Page file 2.28 GB of space

  Hello:

  First of all your needs from laptop to have the hardware (CPU and chipset) Intel to run the Intel Matrix Storage Manager.

  Your C700 CTO may have either hardware Intel or an AMD/Nvidia chipset so I can't tell you what your laptop has.

  You can tell however, and you can tell what mode of the controller to your PC is currently running (AHCI or RAID).

  If you have PC, go into the Device Manager and if you have a category of an ATA/ATAPI IDE controller based on an Intel processor, click to expand that and if your laptop is running in AHCI mode, the controller will have the AHCI word in the description of the controller.

  If your mobile phone is set to RAID (which I doubt), scroll down further on the Device Manager list, and there would be a category of storage controllers if the command is set to RAID.

  Click to expand, and you would see a description of disk with the word inside RAID controller.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• HP ENVY 15 t-k000 CTO Notebook: HP Envy My network adapter does not support gigabit speeds. Is there an upgrade available?

  My HP Envy 15 t-k000 works very well, but it is slow. I thought it was my internet until I did some troubleshooting and discovered that I don't get the super fast speed that I'm supposed to receive this is because my computer does not have a fast enough network adapter. He's currently the Qualcomm Atheros AR9485 it came with. I watched the maintenance manual and could not find an upgrade. Is there a module I can replace with allowing for speeds 1 G?

  The part number for the laptop is G0T55AV.

  Thank you!

  Hello:

  The adapter you mentioned... Qualcomm Atheros AR9485 is the wireless network card, and I do not think that this card connects everything faster than 72 Mbps.

  Your laptop comes with the card Realtek 10/100 ethernet (wired) and it cannot be upgraded because the ethernet chip is part of the motheboard.

  If you want a gigabit ethernet connection, so I advise you to buy an external USB to RJ-45 gigabit ethernet adapter.

  You won't find any wireless card that will go beyond the rate of 867 Mbps AC, and you would need a router ca to achieve these speeds.

  You would also dismantle the entire notebook to replace the wireless card and if your laptop has a single antenna attached to the atheros wireless network card, you will not be able to upgrade to the fastest wireless card.

  A proper AC map would be the Intel 7260 wireless card if your mobile phone has two antennas attached to the atheros card.

  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

• Compaq Presario CQ40 - 100 CTO Notebook (you want to load Windows Xp... Bluw error screen)

  I want to load windows Xp on my notebook Compaq Presario CQ40-100 CTO Notebook PC
  I already have vista on it
  When I try to install windows xp using boot able cd I get an error each time blue screen

  PLS help me... .i want to load windows xp on my laptop

  No. F2736PA #ACJ

  Serial number. CND84502BQ

  Compaq Presario CQ40-100 CTO Notebook PC

  Make your Vista recovery cd/DVDs if you have not yet discovered it here

  Your model should ICH9 sata driver sliptreamed in the installer CD of XP. If you did it right, you'll BSOD error.

  Use Nlite to sliptream ICH9 sata driver.
  A good guide for driver sata sliptream, here

  Note: do NOT use this guide sata driver, your sata driver is below ICH9.

  ICH9 sata driver,

  The pilot lies in iaAHCI.inf and is called ICH9M-E/M SATA AHCI Controller, here

  Download nLite, here

  Some suggestions to avoid problems when installing XP:

  1 try NOT all wake sata drivers, use only ICH9--> ICH9M-E/M SATA AHCI Controller

  2. use of XP - SP2, much easier to use since many XP drivers were built based on XP - SP2.

  3 burn the installer of XP slowly and do not use the maximum speed, sometimes it create errors

  4. choose a reputable support CD, not the one at little cost.

• HP envy 15 notebook PC: driver HP Envy 15 Wireless Network adapt

  I want driver for HP ENVY 15 wireless network adapter

  REF: L0C92EA #ABV

  Operating system: windows 7 Enterprise 64-bit

  Hello:

  You need these drivers wireless and bluetooth for this card...

  Driver LAN wireless Broadcom

  File name: sp69014.exe

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• problem of driver installation wireless network for computer notebook dv7-6c20us

  I installed Windows 7 Professional but do not have a set of drivers for the computer.  I can't get the wireless NETWORK card driver to install.  I downloaded the drivers from the HP site and they will not properly install on the computer.  I do not know the manufacturer of the wireless hardware, so I can't go to the appropriate site.  I tried to use HP scan tool, but it will run on the computer.  Chrome, the button does not even operate.  In Internet Explorer, the scann button depresses but nothing happens.  Help!  Thank you!

  Hello:

  No wonder you had difficulties to find the wireless driver.

  According to the list of parts for your laptop, it comes with the adapter PCIe half minicards (HMC) WiFi Realtek 8188GN.

  The driver for this model of card is not on the page support and driver for your model.

  Here is the link to the driver for this card.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Pavilion Notebook 15-p119: Windows 10: since the execution of Windows update, I can't connect to the wireless network

  Hello, HP assistance.

  I'm having a problem with the connection to my home Wi - Fi network. I am sure the problem has nothing to do with my material and is a problem of Windows only.

  Here's the story: I was fortunately with the Internet from the network before and Windows was connecting automatically every time. But since the Windows Update recently it does not connect. Sometimes it says "unable to connect to this network" and then sometimes it comes up with a box asking me to enter a user name and a password. The thing is... I've never set up a password in Windows for Internet access, so I do not know why he was asking me now. I looked around the Internet via my Tablet (which is connected to the same Wi - Fi network fine, with my phone) and found that it is a common problem. And yet, none of the solutions work for me.

  I wonder if the solution is somehow change the settings so that a password is not required to connect to a network. Or maybe enter a default user name and password when the box appears again. That said, the box did not come for a while.

  Help, please!

  Thank you for your query.

  I understand that your mobile phone works well and you didn't have any problems with your wireless connection. After the upgrade to Windows 10, your wireless network is intermittent and will prompt you for a user name and password.

  The guest is not the Internet, but rather to join your network. He is looking for the network name and password.

  When I did a search for HP laptop 15-p119, I was unable to locate this model. Would you please check your model? How can I find my model number or product number?

  After the upgrade to Windows 10 did you all your Windows updates?

  Sometimes it fails to be installed automatically, if you can try running the Troubleshooting of windows update. to maybe gain others.

  You run the HP Support Assistant since the upgrade?

  If the problem persists, once you have established a test of Wi - Fi automatically update drivers Device Manager wireless.

  • Right click on the Windows button in the bottom left corner, then choose Device Manager

  • Click network to expand the list

  • Right click on the wireless adapter and choose put updated driver

  Select "Automatically search for updated driver software" this month may start a download to install a newer driver.

  Here is a link that can also help. HP PC - troubleshooting wireless network and Internet (Windows 10) 

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  "To show recognition for my efforts, please click on the" ","inch Up Icon " below.

• Does not connect to my wireless network

  I have compaq Presario F700 Series Notebook Pc running on Windows Vista when I try to connect to my wireless router, it says unidentified network and custom give me internet acess Ive changed the Ipv6 and Ipv4 auto Ive restored the pc too factory settings and the problem persist when I run a diagnosis, it says "unable to connect to the main (75.75.75.75) DNS server please help this got me very frustrated ive. been trying to fix this problem since March.

  Hello

  Have you tried changing your primary DNS server?

  do then goto:

  "Network control and Internet\Network connections."

  right click on your card with which you connect, and then click Properties.

  Double-click on "Internet version 4 Protocol (TCP/IP).

  check the "use address next DNS" and after 2 addresses in input boxes:

  8.8.8.8

  8.8.4.4

  Save your settings and see if it works.

  If still no luck to do this:

  Press "Windows + R" on your keyboard and then type cmd in the box hit enter and type following:

  Ping 8.8.8.8

  Make sure that there is response from top of the order, it should look like

  8.8.8.8 response:

  When you are done come back here and share the results.

• Presario F500: Have no WiFi on Presario F500

  I am using Presario F500 for a few years. A year ago I started to install Windows 7 32 bit on this computer, and it worked very well.

  However, 1 month ago my wireless connection just disappeared, and light orange. No connection icon in the network connections wireless network, no wireless card detected in Device Manager, as shown below:

  

  

  What I did:

  -Check to see if I accidentally turned it off (and I didn't)

  -Troubleshooting

  -Uninstall and reinstall the drivers (sp53261.exe and sp44923.exe). When I tried to install sp53261 (driver Atheros), he kept saying "" adapt 802.11a/b/g/n wireless device not found. " the device may not be present or could have been ejected/disconnected from the system,"to which I went to the next attempt.

  -Replace the new wifi card

  -Uncheck "allow the computer to turn off this device to save power".

  Nothing has worked. I searched the Internet solutions, or cases similar (many. It seems Presario series have in common) and I tried all of them.  I only got disappointment. Now I have given up on me, please, Support HP, help me to fix this miserable and frustrating.

  You are the very welcome.

  If you don't want to buy an external USB wireless adaptor for your, then Yes, it's time to replace your laptop.

  Unless the motherboard is replaced with a good one, the laptop's internal wireless will never work again.

  I have a portable dv6810us (essentially the same hardware as yours), and I'm waiting for my wireless to quit.

  I don't use it much, so it can last a little longer.

• Pavilion DV7T - 1200 CTO happened w / Wireless issues - work in progress - solved

  I took delivery on a DV7T yesterday.  It is configured with the minimap Intel 5100 AGN & Vista 32 Home premium (my first Vista machine).  I had updated my wireless router home in anticipation of his arrival, installation of a model of D - Link DIR-655 (Vista friendly 802.11n capable).  The router plays well with my existing XP laptop and has been configured for WPA2 AES & compatibility b/g/n.

  I configured the appropriate connection parameters and launched a manual connection.  I made changes to the router so the SSID was visible and defined the DV7T for automatic connection, but it took often more a minute before the DV7T would see even the network wireless and even a minute or two before reporting the signal strength. Each time, connection attempts failed, reports of a lack of response from the router.  After the double check (and returning) settings and password several times (and the audit by doing the same thing on another laptop which connected very well) I finally decided there was a problem and called for help.  Given that the order had been placed through Costco, I went through their Concierge as a first level service. Their script for was power off all computers (XP) on the network saying that a common problem was having a Vista machine join a network with XP already connected machines. No joy. Same lack of goodness after removing/reinstalling the drivers. It was as much as the script went to attempts at original resolution.

  At this point, no resolution & I plan just to return the machine for a refund (lack of wireless really it would damage the intended use). Propelled upwards all the equipment I had turned off.  Bored of not knowing for sure if it was an inherent incompatibility or a hardware problem (the day of delivery!)  I ended up out and pick up an express format card card N Wireless of Linksys.   Responsible drivers, plugged in the card and voila! immediately, the machine connects using the configuration of the connection that I had entered previously.  On top of that, the flow of data showed that 240-270 mbits.

  With this info, I went back to service, initially to the connection of Costco and then discussed in HP support. After a 3 hour marathon call, HP sends a replacement 5100AGN card to 'see if this fixes things', if it is not, the machine must go back to the service (as a problem of antennas would not be repairable client). Part of the duration of a call has been associated with finding the right part for a machine CTO.  The wireless card on my machine something SN (Broadcom) was set apart from the 5100 (although the list mentioned packing a minimap Intel next gen and the Manager device reports an Intel 5100AGN).  They have finally found a suitable part number (I hope).

  I just thought I would pass this along in case where someone else found themselves in a similar situation.  I'll post much after that the replacement property is displayed. As a side note, the Linksys N Ultra Rangeplus expresscard works really well as a replacement. Of course I'd rather not have something projecting from the side, but it certainly did the job.

  EDITION - ADDENDUM

  After the above post, I couldn't help but think that a problem of antennas sounded very probably - maybe a lead broken/disconnected (something I mentioned to the technology of the telephone service).  In any case, just a minute before, I went ahead and pulled the bottom panel, so I could take a look at the wireless card.  Technology said there would be two tracks running to the card - only was connected, the other has fallen in a crack between the card and the frame.  The wire not connected has been labeled "main" and there is a connector on the "main" labelled map  The two sons had been celo-glued to the card (in the broad sense), but I had the disconnected an oriented properly & pressed into the connector on the card.  He buttoned & turned on the machine.  He immediately finds the wireless network and connection has been made in a few seconds.

  My only ongoing question may turn out to be wireless performance.  Connection with the linksys card speeds were always above 200 (230-270).  Speeds, I see on the bed in so far have been initially lower than 100, with the best after being 150 mbits.  Any suggestions for how this can be improved?  Will the adapter 'learn' alone and get better over time?

  FINAL ADDENDUM-

  Model found on another forum that the 5100AGN has apparently a maximum 150 Mbps on a 300 Mbps max for RX & TX... the 5300AGN is 300 in both directions.

  This suggests that the 150 that I see is as good as it gets for my integrated card. Apparently, the Linksys expresscard I used is good for TX/RX 300.

  Nick

  Message edited by skhowell on 02/21/2009 08:22
  Message edited by skhowell on 02/21/2009 17:00

  I don't know that the costco guys worked just for the trouble shooting script, he gave.  On the plus side, he had an understanding of the issues, & spoke vernacular American English (and not in a call center offshore).  He was ready to continue, but I needed a time out.  The second call (after me obtain Linksys for comparison) was good enough and the technology was very ready he climbs to a technician of HP (once again, the continent - not off shore), which was certainly ready to order a replacement part, but crossed a few last checks more that the internal card could not be implemented. The part was sentenced & will be shipped without requiring a deposit of me. The only negative for telephone exchanges, it's neither opening proposed leads the lower panel to check the antennas have been connected correctly.

  As stated in the original post - edited-, the final fix was to open the Panel & visually notice that a 'primary' marked lead was not connected to the wireless card.  Attaching which lead to the consequence named connector on the Board eliminated the problem.   The disparity of the connection speeds between the internal 5100AGN and the Linksys 802.11n expresscard was due to the limitations of card design (150TX/300RX 5100AGN and 300 TX/RX for the Linksys), so the 150 Mbps I see currently for internally is as good it will become.  I'll probably send the rear replacement not opened as opposed to actually Exchange cards. (I don't think that the shipment may be shortstopped at this point...).

  Nick

• Equium M40X and a wireless network

  Hey all,.
  Just got my new satellite Notebook and when I try to connect to my home wireless network, I can handle only communicate with limited connectivity or not (it cannot refresh the IP either).

  I am positive its nothing to do with the network because all my other computers work well.

  I have all the right passwords and as far as I can tell all my setting are correct, I tried the internal wireless adapter and an external both without success.

  Can anyone offer no indication to this problem?

  -Steve

  Hello

  Your problem is very strange for me. Usually, if you are able to make any kind of connection, which means that the WLAN, card functionality is OK and there may be a problem with the WLAN settings.

  As far as I know, it can happen that there are periodical performance decreases with the wireless network card you have, but it should not happen with an external. If you have the same problem with two different cards, there are some wrong settings.

  It is not easy to explain what can be the problem.