Press the capture button

Similar Questions

• iOS 10 - now I touch Touch ID, * and * press the Home button to open iPhone?

  I have an iPhone 6, and today I have updated to iOS 9.3.5, to 10.0.1.  One thing I noticed that really bothers me, it's unlocking the device.  With iOS 9, I had to touch the Touch ID to unlock.  Now I touch the ID to touch and sometimes it unlocks, and sometimes, I see 'Unlocked' at the top of the screen and "Press home to open" at the bottom.  I have to press the Home button to open the phone.

  It seems to me that having to push the home button more often will put more wear and tear, causing to fail more sooner than it otherwise.  Who thought it was a good idea?  It is perhaps a subtle boost to force me to update the iPhone 7, with his home in the solid state button?

  I think it's something that needs to be modified in iOS 10.0.2.  Make sure that touching just the Touch ID opens the phone each time, as iOS 9 has done.

  Happened to me too.  To repair. go to General settings accessibility HomeButton scroll Restfinger unlock... .and turn on.

• Increase in Wake - should not have to press the Home button to unlock

  Hi all

  I appreciate the work that the Apple development team did to iOS 10. Most of it's amazing as usual! BUT...

  The revival of the Wake feature needs an additional configuration option. In fact, some of us LIKE how quickly iOS 9 unlocks the phone and have the habit of hitting the power button to turn the screen to access the shortcut of the camera or using a finger not configured to press the Home button.

  That said, if I 'raises to Wake"my iPhone, having to press the Home button to complete the unlocking process is not intuitive. It must simply unlock and go to my home screen.

  As this MUST have been done intentionally, I think that you should give us the option attached to "Raise to Wake" function to enable or disable the duty press the Home button to unlock.

  Who else agrees? Thanks for your time!

  byersbw wrote:

  Who else agrees? Thanks for your time!

  Polls don't is not allowed here and probably wouldn't have much affect Apple's not read here.

  Submit your comments directly to Apple here:

  http://www.Apple.com/feedback

  Good luck.

• By pressing the home button does not take me to the home screen of iOS 9.3.3

  I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Firefox crashes when I pressed the Browse button to upload files

  Windows 7 x 32 Firefox 10.02 the program crashes constantly when I press the Browse button (such as gmail attachments, virustotal programs and so on.)
  PS I've already eliminated the registry problems and attempted to delete MRU registry, such as mentioned in this topic: https://support.mozilla.org/ru/questions/754368#answer-105628

  Cor - el will no doubt come with suggestions. I will list the accident report Details incase they help someone. The accident occurred when a component associated Windows is in use. Have you ensured you have no background task running, and no unnecessary plugins Firefox are running.

  No reason to expect to be directly related, but a previous incident with the same signature took place when bookmarks were used, and the solution in this instance was:

  I found out that an option in Microsoft File Explorer caused the crash.
  To solve this:
  - Go to "Organize"
  - Choose "Folder and search options"
  - uncheck "Automatically expand to current folder"
  

   Now Firefox won't crash again!
  

  Your reports for s CrashID all have the same signature

  • related bug650664 - crash if I backup my favorites...
  • Signature: TV_GetItemRect (_TREE *, _TREEITEM *, tagRECT *, unsigned int)
    • 5d52e578-0069-4610-8efc-104252120219
    • f308eb2b-cbfe-40fd-81B5-d192a2120219
    • 6a538dc8-90ca-4B55-a662-5b7882120219
    • bff2939f-ac32-49D4-853C-622bf2120219
    • 0841e4b8-c464-4C84-91fa-3c9a62120219
    • 300aa7b7-b3da-4a20-85fb-9203a2120219
    • 4db23c0e-d90c-4701-b0a2-cbb192120219
    • 28f39d21-e4a1-4A37-8b20-d3a622120219

• How can I place a STOP button on my toolbar. I would like to stop firefox from loading a page by pressing the STOP button, but I can't find it in the toolbar options.

  How can I place a STOP button on my toolbar. I would like to stop firefox from loading a page by pressing the STOP button, but I can't find it in the toolbar options.

  First of all, if you have the menu bar show. (File-Edit-View-History-Bookmarks-Tools-Help), then you won't see the orange FireFox button because in the new version of FireFox button replaces the menu bar. You can believe that's the way you want by clicking on 'View', then place your cursor over "Toolbars" and check or uncheck menu bar. If you have the display on menu bar, click on 'View' then drag down to "Toolbars", then descend to the right and go to 'customize '; a click on it. Then, when the next screen appears, even if 'Reload' is not displayed on this topic, it appears somewhere upwards in your toolbar. (Mine was above the Google search box). Put your cursor on it and drag-and - drop to the left of your address bar. The "Stop" button should be left more than the button 'recharge' in order to get two separate buttons for these tasks. If the 'Reload' button is further to the left, then you get a single button that performs the tasks at the same time. I hope this helps.

• I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

  I reset my Apple Watch and I can no longer use it, whenever I press the power button, it gives me the sign of loading

  Hello

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• I can't import photos in i-Photo i-Movie. Photobooth-only appears when I press the camera button

  I can't import photos in i-Photo i-Movie. I press the camera button but only photo booths - comes upp no i-photo

  That is right. Looking for photos from the Edit menu.

• I shrank my Yahoo email by pressing the control button. How can I restore original size

  I shrank my Yahoo email by pressing the control button. How can I restore original size?

  This has happened

  Just once or twice

  == I pressed control button

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

• Problem intermittent boot Tecra S2 after pressing the power button

  Hi all
  I have a Tecra S2 with the 6600go GFX card.
  The machine is large but presents the following problem.

  After that the machine was interrupted for a while it will start not reliable.
  You press the power button. Either as soon as you release the power button or a second later (changes every time) the green power light comes on. The fan spins at high speed then slows down to a crawl a few seconds later (as usual) but LCD does not illuminate.
  Also when it does not start USB devices are not initialized (I have a product key dongle which will flash if it is not initialized - when you start the laptop properly this dongle on continuous - a normal start, it is initialized before the ramtest BIOS)

  I've updated the bios a couple of times - it is now 2.4 (I noticed the power button timings were changed in the V1.9) but this has not solved the problem.

  I tried to start on the current with battery removed, ca battery & battery only - the result is the same.

  I can start later button power until the laptop off, wait a few seconds and then try to get back to work.
  After several of these cycles, it will begin eventually to the top. Recently, it seems that it took several attempts before start-up.

  If I have used the laptop for an hour or two and then turn it off it will start almost always a first time.

  If I put the laptop to sleep (orange slow flashing power LED) then half the time that it will continue when you press the power button - the other half of the power LED will switch to the green but the LCD display remains inactive & I switch the power button.

  Any help or advice would be welcome.

  Thanks in advance,
  Robin

  Hello

  This seems very odd.
  First of all: you can boot from USB only if the floppy drive is attached.
  You can boot from these devices USB-drive floppy/disk HARD/ODD/LAN.

  In my opinion the other unit starts the sound not as issues not a software problem.
  I think there could be something wrong with the hardware. But it is not easy to say what it could be exactly.
  You know, the look on the material is necessary.
  I recommend you contact Toshiba service partner in your country.
  They have much more experience in such cases. Guys can run tests and then can give you correct information about the failure.

• ElliteBook 8460p will not be running when you press the Start button

  Hi Ant classmates.
  
  I am facing a problem with my 8460p ElliteBook. When I press the Start button it won't start and I need to apply some mechanical vibrarions so he reacts to the button. I guess that there is a problem with a connection inside. The thing is that he does not always fail, but it happens more often. I'm afraid to send it to HP support and resume with a message like "the problem didn't see the - up." I'm close to the date limit of warranty, but I need my laptop for 3 more weeks for professional issues. What should I do?
  
  Thank you

  Hello Angelica,.
  Welcome to the HP Forums.
  
  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
  http://h30499.www3.HP.com/hpeb/
  
  Thanks for posting on the HP Forums.

• 15 170tu ac: I HAV to press the power button several times to start the laptop...

  I HAV to press the power button several times to start the laptop... works well with the power supply on.

  all My drivers & bios is updated... but when I opened the lid... I HAV poer press several times the button and he then began 4-5 min.

  Hi @Vishalwagh123,

  Welcome to HP's Forums a great way to get help. It's a great place to find answers and advice! Thanks for the post.

  I understand you have questions turn on/off the device and you must press the power button several times for him to start. I'll be happy to help you.

  Please try these steps first. Perform a hard reset.

  • Steps to do:
  • Turn off the computer and unplug the charger. Then remove the battery.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.

  If it fires up immediately the issue is resolved. Otherwise, try to turn on the computer without the battery and check that it works immediately.

  In your message, you said that it works very well with the charger. However, I need more clarity here to help you better.

  It works immediately when the adapter is connected and the power button is pushed only once?

  If you again press the power button several times, it may be a faulty power button, and you will need to contact the hotline at the service of the unit.

  Let me know what happens when you try to turn on the unit without the charger?

  Visit this link to contact support phone:

  http://HP.care/2bjG4nE

  Hope the problem is solved without hassle. Please keep me in the loop.

  Take care and have a week Holy.

• Satellite A60 Shuts Down immediately after pressing the Start button / stop

  My A60 stops after 2-3 seconds when I press the power button to open the laptop. After pressing the power button, all the lights on, but until something appears on the screen, the computer cuts the power. Pleasure, DVD and disk hard audio work. At least, the sounds come from these materials. Also from the buttom of laptop, I see that the fan is running.

  This problem started anywhere Yesderday, I closed my laptop properly and carry my laptop to my friends. When I tried to open my laptop, this problem occurred and I could not open yet.

  I tried all combinations of use power supply and battery for power. Non of them works.
  Is there a had the same problem or have any diagonistics for this problem.
  Thank you

  Emrah

  Hello

  Try to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?
  You can also try to use the FN + F5 combination to check if the display will change back to the internal display.

  But look, man, if you are not successful then I guess there must be a serious hardware problem and only the laptop technician might know what's wrong.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.