Prevents the sessions to connect to the DB

Similar Questions

• "" My internet connection is constantly down and back on the error "negotiating IPsec year failure prevents the connection.

  Original title: The IPsec negotiation failure prevents the connection

  My internet connection is constantly visitor drop-off and restarted, and when I troubleshoot I get this message "the IPsec negotiation failure prevents the connection." I don't use VPN or anything so I have no idea what it means. I restarted the router several times. Any other ideas?

  Hello

  1. you are using a wired or a wireless connection?

  2. If it works well before?

  3 did you changes to the computer before the show?

  Method 1: Reset the router and see if that helps.

  Note: To help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  Method 2: Uninstall and reinstall the NIC drivers and see if that helps.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network card, right-click the wireless adapter option

  (d) click on uninstall

  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows 7 of fingerprints of connection problem, error ' year error occurred preventing the use of your information for fingerprint identification.

  Original title: wndows 7 fingerprint logon

  I like to use fingerprints for better security authentication when logging a session Windows or unlock. I can create a long, highly secure password and do not have to type it every time I have lock Windows. BUT...

  A week or two ago, the sensors of validity fingerprint reader on my HP Pavilion dv7 stopped working. I reinstalled the latest driver from HP support device, and everything worked fine for a day or two. Now the sensor still works, but Windows (7, home edition, SP1) gives me the message "year error occurred preventing the use of your fingerprint credentials." The only thing that has changed, I know, is the latest Windows updates.

  Can anyone help? Thank you!

  Hi Frank,.

  Thanks for the reply.

  I suggest you to refer to the article and check if it helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03061709

  If the problem persists, I suggest you send the request in Support HP for assistance.

  http://h30434.www3.HP.com/

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  I can not install Lightroom 6 on my laptop using 8.1 to WIN.  The installer asks me to connect and when I do after 20 sec freezes the computer and the battery needs to restart.  This prevents the work online help.  What can I do?

  Settle in the right forum.

• Empty field prevents the user to connect

  Good afternoon

  How to prevent a user to digitally sign the document if there is a blank field.

  The issue I'm having is that the digital signature line appears. When the user connects, the document is saved. After you run, my java code running the signature of compensation.

  The thing is that we have a document saved with a signature in there.

  Is it possible that I can have a JavaScript to prevent the digital signature line if a field is empty?

  You must place the entire code after 'else' braces, as

  you have done with the code after the if statement.

• Prevent the owner of the schema using development tools

  Hello world

  We are doing some tasks to meet the PCI DSS requirements. One of them is preventing the schema owner to log in using development tools (TOAD, sqlplus, plsqldev, SQL Developer...). I found a solution here:

  http://kamranagayev.com/2009/10/04/block-developers-from-using-Toad-and-other-tools-on-production-databases/

  But as comment said, if we change the name of the .exe file, we can easily connect. I thought to do info = module, no program info. I tried with no success. I read somewhere that in after logon, the client info trigger is not set completely. So that we can't get info module exactly after logon trigger (I tried and I have seen this module was same as program interviewed since the session$ v).

  Another comment suggested that we allow some programs to connect instead of refuse many unauthorized tools. I think it is a good idea. But I wonder if some guys know rename tool dev as our authorized tools and it can connect.

  If anyone has any ideas or solutions, please help me. Thank you.

  One solution is to use two schemas - detail a. has no privs assigned to it (not even CREATE SESSION), but contains all of the objects (tables, indexes, views, code, etc.). Diagram B does not all objects, but given privileges to operate on the objects belongs to priv a. withdrawal CREATE SESSION from scheme a scheme b (in for example Prod) will achieve your requirement.

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• a problem is preventing the resolution of problems starting

  My Lenovo P500 was working fine until yesterday morning.
  Since the opening of my pc yesterday morning, there is a problem. I could not connect to the network and audio system was also not working.
  'Network and sharing Center' in the Control Panel indicates "dependency service or group was able to start.
  I tried to solve the problems, but the problems said "a problem is preventing the troubleshooting tool to start.

  My system is Windows 8.1 64 - bit. Never formatted the system since I bought it in 2012

  razendra wrote:
  I remember the command, it does not work. Same mistake. "Error: 87.
  Cleaning-image option is unknown.
  I think it is a malware attack. The event log service is also unavailable.

  I suggested in post 4 on this subject and you answered that it is clean.

  For a quick solution, rather analyze what happens, try to back up your data and initiate the restore of the system through the key NOVO OKR. It should restore your unit to factory default. Note: after this, you will have to reinstall all the third-party program that you understand your data.

• Prevents the graphic update/scrolling

  Hello

  I have a VI where periodically I have to prevent the permanent table scroll. The scroll rate is excessively high and I can't seem to stop or slow down at least. Currently the graphic entrance is connected to a business structure that allows to choose between acquiring data or by using a default value. Using the event structure is not possible that the section is incorporated in a while loop and a part of a larger application.

  Thank you

  I agree with Norbert B & altenbach

  That's how did briefly,

• Firewall prevents the two outgoing and downloading data

  Original title: Firewall blocked

  firewall prevents the two outgoing and data download to get thur - when trying to review the status of firewall messages setting for some reason connection cannot be completed question began about two weeks is there is alos prevent preventing me from getting to updates software on most of the occassins download is so slow or outgoing computer search will display connection can not be filled - any version of xp windows-ideas

  Hi Wayne,

  You can check this article here to see if it corrects the problem.

  If that doesn't work, see this article. See how it goes.

  I hope this helps!

• Update Windows Installer is dead & now: 0x0000007B blue screen (0x80399BB0 0 x 0000034 0x00000000 0x00000000) AND a fix will prevent the system from starting.

  I was installing updates of windows and the computer is dead in the middle of it.  When I turned it back on it brought me to a blue screen with error codes: 0x0000007B (0x80399BB0 0 x 0000034 0x00000000 0x00000000).  It prompted me to do a system restore or to get to the system recovery, however it shows that there is no available restore points (even though I know that there are a bunch of them... because I checked this before I tried to make the updates of windows).  I went into the system recovery & the scan of my system with a scan of the additional memory, and there is nothing wrong with my real hardware.  The error recovery of the system that was given to me after the scan of my system is "a fix prevents the system to start.".  I looked at different positions in line with methods to get around this, but none of them does not seem to work.  Vssadmin does not appear on my system to try to use it again.

  I also tried cela http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/8b3e2550-c174-486f-b5dc-98260abc05f9, but as I mentioned before all my restore points have disappeared and when I try not to make method 4 there is no pending.xml file and these registry entries do not exist: HLKM\Offline Components\AdvancedInstallersNeedResolving, HKLM\Offline Components\PendingXmlIdentifier.

  I'm almost done try all this and ready to make a fresh Windows... Install but I hate to really do this knowing that everything was working fine before all this & my hardware is fine... If I could just figure out how to get rid of this darn update all this hangs then all would be well.  Anyone have any suggestions?

  Thanks in advance,

  Phatty

  Hello

  When a computer dies in the middle of an update, it often corrupts many system files leaving no other choice than to reinstall. This is why it is always recommended that laptops/notebooks be connected when you install updates. If Windows was trying to replace a critical system file when the power is off, there are very little that you can do to fix it. If possible, start with a system for the Recovery Console disk and try running "sfc/scannow" to correct or replacement of the damaged system files, but does not satisfy, you are faced with a relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• error on startup: "a patch prevents the system from starting.

  Original title: Windows won't load - Vista

  Windows does not load... My restore won't work - I get a msg that "a patch prevents the system to start."  It seems last successful update was 14 and only restore to earlier date options go back 5 days.  I'm not a very experienced computer Fixer.  Any ideas on how to move to the previous date?  Thank you!

  Hello

  Here's how to do a system restore

  make it Safe Mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• WSD Print device driver error prevents the standby machine

  Hi all.  I've been struggling with this problem for a few months, without success.  On my system: Dell PC, Vista 32, SP2, using a Brother MFC 490 all-in-one that is connected to my wireless network.

  My problem is the following: a few months ago I noticed that the Bureau has refused to go to sleep, instead showing a popup that says, "the device driver for the WSD print device prevents the standby machine."  It's embarrassing at the very least, a waste of money and the system of life at worst.

  I tried the following without success: restored the system to a point before the show, updated the wsd, uninstalled/reinstalled the wsd driver driver & peripheral, uninstalled the Brother software (the printer has remained on the system, thanks to the auto detection) and banged my head with great enthusiasm on the keyboard.

  If all goes well, there is a relatively easy fix!  Thanks for your suggestions...

  Hello DFontanella,

  The error message indicates that there is a problem with the driver and preventing the computer to go to sleep.

  I suggest you uninstall the drivers for the device. Disconnect the connected device and try to load the generic drivers of the printer in the back.

  Also try to restore the driver from Device Manager:

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  1. open Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  2 right-click the device for which the previous version of the driver is desired and then click Properties.

  3. click on the tab drivers.

  4. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Prevent the closing LoginDialog when entering a wrong password

  How can I prevent the LoginDialog from closing when the user enters a bad password? I tried event.stopImmediatePropogation and event.stopPropogation ()... When the user clicks on the button "Login" dialog closes connection when I want to stay open and display its errorText = "Incorrect password"

  private function login(password:String):void{
      var alert:LoginDialog = new LoginDialog();
      alert.title = "Login";
      alert.message = "Please enter your Password:";
      alert.passwordPrompt = "password";
      alert.addButton( 'Quit' );
      alert.addButton( 'Login' );
      alert.addEventListener(Event.SELECT, alertButtonClicked);
      alert.show(); 
  
      function alertButtonClicked( event : Event ) : void
      {
          switch (event.target.getItemAt(event.target.selectedIndex).label){
  
              case "Login":
                  if (alert.password == password){
                      continueAfterLogin()
                  }else{
                      alert.errorText = "Incorrect Password!"
                      // i tried both of these
                      event.stopImmediatePropagation();
                      event.stopPropagation();
                  }
                  break;
              case "Quit":
                  stage.nativeWindow.close();
                  break;
  
          }
  
      }
  }
  

  The only thing that seems to work: callLater (alert.show);

     case "Login":
      if (alert.password == password){
          continueAfterLogin()
      }else{
          alert.errorText = "Incorrect Password!"
          callLater(alert.show);
      }
      break;
  

  Easy:

  alert.cancelRequired = true;

  This will keep the dialog box when you press a button and you will have to remove it when needed on the button event handler with:

  Alert.Cancel ();

• Group Policy to clear the MRU lists and to clear or to prevent the login information of the user for such programs as being registered remote desktop

  Hello

  Please someone can instruct me on how to implement Group Policy to clear the MRU lists and to clear or to prevent the login information of the user for such programs as being registered remote desktop. Your help would be much appreciated.

  Kind regards

  RocknRollTim

  Hi Tim,.

  Please contact Microsoft Community.

  I understand that you want to prevent the user details stored connection and deletes automatically the most recently used (MRU) list. To help you better ask you to answer the following questions:

  Your computer is connected to the domain?

  Please see the configuration group policies section below.

  http://TechNet.Microsoft.com/en-us/library/bb742376.aspx

  If the problem persists, thanks for posting the same question in the Microsoft TechNet forum for assistance.

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information helps. Response with status so that we can help you.

• Prevent the loading application if the user is in offline mode

  Hello

  I was wondering if there was a way to prevent the user to access a web application wrapped in webworks if they start the application without a data connection.

  I added event listeners to the window if a user is in the application and goes offline / comes online.

  I would stop at the splash screen and displays an informational message.

  I don't have the time in my current project to perform offline caching etc then hoped for this as a miracle despite that hinder the UX.

  BB10 on a Z10 with webworks last SDK is also used.

  I tried to use the navigator object, but it doesn't seem to detect on first loading of the application.

  Also it does not switch the value when going offline online in the app itself so just left the detection online/offline for event listeners for the moment until I had time to find a better solution.