Preview in browser - HTTP Error 404.0 - not found

Similar Questions

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Error 404 page not found when changing the target agent owner

  I use OEM 12.1.0.3. For all other target (DB, earphone, host, etc), I was able to change my account to another account owner.

  I sailed to targets-> all targets-> (right click on the target)-> target-> administrator access implementation.

  I used the "Change owner" button on this page for all the targets successfully. However, when I click on "Change in ownership" for the target of the agent, I get an error page 404 not found error. Has anyone seen this happen before? Is there a workaround to emcli that I can use?

  You can use the verb emcli change_target_owner to change the property of a target.

  Syntax:

  emcli change_target_owner

  -target = "target_name:target_type".

  [- target = "target_name:target_type"]

  -owner = "current_target_owner_name."

  -new_owner = "new_owner_name".

  EX:

  emcli change_target_owner-target = "myhost.oracle.com:3872:oracle_emd"- owner = "SYSMAN" - new_owner = "LNHAN"

  For more information on the verb, see:

  The verb reference

  Yes, I saw the "Not found" error when you attempt to change the property of a target of the agent from the console in EM 12.1.0.3. The operation works very well in 12.1.0.4 EM well.

  Kind regards

  -Loc

• Error 404: resource not found on youtube. works on IE not firefox?

  Screenshot:
  http://imgur.com/Ajcbw

  This isn't the 'Aginx' thing, that I've seen a lot.
  In IE, youtube works perfectly. In firefix, it throws the error above (screenshot)

  Please also check that firefox has to connect directly to the internet. in firefox > options > advanced > network > connection - settings... Choose 'no proxy'.

  also, make sure that firefox is not blocked or in sandbox of your firewall.

  Configure the firewall so that Firefox can access the Internet

• cannot load it my programs, at the dose of my drive does not work., and I get this massage when I try low load out of sight Adobes...  HTTP ERROR: 404 /support/downloads/dlm/main.jsp

  can not down load my programs, my dose of disc does not work.

  and I get this massage when I try low load out of sight Adobes...  HTTP ERROR: 404 /support/downloads/dlm/main.jsp

  clear your adobe.com cookies or use a different browser or download from prodesigntools.com

• HTTP 404 page not found error! on the tabs

  Hi all
  
  I have a page with several tabs. When the user navigates from one tab to another tab (using the set of standard tab) report interactive, I get the error HTTP 404 page not found error.
  
  The tabs are as follows.
  
  Homepage #1
  varlist page #2
  page criteria #7
  dynamic report page #10
  interactive report #15 page
  
  I can move on by selecting the tabs but when I'm in the interactive report tab and select one of the other tabs I get error HTTP 404 page not found error...
  
  
  Someone can help me.
  
  Thank you/kumar
  
  Published by: kumar73 on May 5, 2010 14:45
  
  Published by: kumar73 on May 5, 2010 14:46

  Hello

  Go edit point.
  In the section appears, there is attribute region. This selection list you select in witch region element is displayed.

  I've defined at some elements in your application to "temp area" so those who are not rendered.
  Don't forget that you can not for example the value and relate to positions that are not rendered. These elements the type of step is no longer

  This could help you find this attribute point I mean
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/UI.htm#sthref1464

  Sorry I'm bad at explaining things

  BR, Jari

• HTTP ERROR: 404 /support/downloads/dlm/main.jsp

  I get this error

  HTTP ERROR: 404 /support/downloads/dlm/main.jsp

  When I logged into my account and I try to down load CS3 that I bought years ago. I removed most of the programs of my macbook since I wasn't with them.

  Now I want to reinstall CS3 (in particular from the Indesign program) my account has the serial number appears.

  But all the CS download page links have the above error code.

  There is no product for me to download.

  Can anyone help?

  Thank you

  Try another browser if you have a problem with the link below.

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Download Photoshop CS3 from Adobe, when I click the link I get http 404 page not found.

  I have a copy of Photoshop CS3 on my old Macbook. Need to move to my new Macbook with no CD player.  Following the instructions that it says to download CS3 and enter the serial number.  When I try to download Adobe and click on the link, I get http 404 page not found.

  Download the CS3 products

  Works for me. If there are problems, use a different browser and check your network configuration.

  Mylenium

• I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  Make sure you have cookies enabled for your browser.  Try using a different browser if the problem persists.

• "404 - page not found" error message after downloading and installing Firefox 15

  "404 Page not found" error message after you download the latest version of Firefox.

  It is sometimes the result of a software firewall that protects you against modified applications. Or it could be something else. Can you look at this article and see if it helps: Firefox can not load websites, but can other browsers.

• Help, please... 404 File not found

  I have both a .doc and a .sql files to a server location. When I attempt to access files through the browser using the url address topographiee by car, open the .doc file, but the .sql file shows HTTP 404 File not found error.

  Could someone please give me a reason to this?...

  This is linked with IIS, such as IIS not understad the file type, you must add the type of mime for the .sql file in the iis (tab httpheaders) configuration to resolve this problem. You can find for this mime type. Please try application/x-sql"."

• Fatal error: Class 'JRequest' not found in /.

  I just installed and updated Premium CS5. I'm a Joomla! Web designer and am looking forward to using LIVE VIEW. Every time I open a Joomla index.php file and connect to a server, I get this message: Fatal error: Class 'JRequest' not found in / (directory).

  I clicked on the link DISCOVER and still got the error. I searched "jrequest" in the forums and found nothing.

  You don't need to set the parameters of Live View. That is only necessary when you test pages requiring variables passed through the URL, or through the POST method.

  Implementation of Dreamweaver CS5 to work with a CMS such as WordPress, Drupal or Joomla!, is very easy. Dreamweaver manages a CMS in exactly in the same way as a browser. Everything happens through index.php. To do this, Dreamweaver needs to know two things:

  • The physical address of the root of the site.
  • The base URL that points to the same location.

  It is recommended to work to set up a local test environment, using XAMPP, Wamp, MAMP or a similar montage. I use Joomla!, but I set up a test installation to check for one of my books. The Joomla! files are located in C:\xampp\htdocs\joomla\. In the Site configuration dialog box, the test server uses the following parameters:

  • Connect using: Local/network
  • Folder on the server: C:\xampp\htdocs\joomla\
  • http://localhost/Joomla/
  • Advanced: PHP MySQL server model

  Because Joomla! discouraged use PHP code, you must also create a file .htaccess with the following content:

  php_value display_errors off
  

  If you use a remote installation as your test server, you must connect using FTP or SFTP. In the definition of the test server, enter the details of the FTP, you need to access the server.

  Since your Joomla! site is located in public_html, the value entered in the root directory must be all that your Web host tells you to go to the root of the site. In some cases, you can leave this field blank, because your login takes you there automatically. In other cases, you may need to enter/home/username/public_html.

  The value entered in Web URL is the base URL for your site. In the case of example.com, it would be http://www.example.com/.

  I have not tested a Cluster using a remote server, but I think you need to copy index.php in your local site folder. You open index.php in the Dreamweaver Document window, and then click Live View. Dreamweaver displays the site in Live View mode and connect to the test server. To navigate to other pages in the site, hold down the CTRL key when you click on the links.

  The mistake that many people make is to try to open a page directly in Dreamweaver. It does not work. You need navigate to the page in the same way as a browser. However, if you know the URL of a page, you can enter it directly in the field address bar of the browser in Dreamweaver.

• Update the BIOS of satellite L755-144 - 404 File not found

  From [http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK]
  and [http://uk.computers.toshiba-europe.com/innovation/download_bios.jsp?service=UK]

  11/07/11 BIOS update Toshiba OS independent 2, 70 - WIN World Wide

  [http://support1.toshiba-tro.de/tedd-files2/0/bios-20111107185122.zip]

  results in
  404 File not found

  Post edited by: MarkE

  Thanks for the comments!

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Error: Type was not found or was not a compilation constant: AlertDialog.

  I tried to compile one of my PlayBook AIR applications using the SDK of AIR BB10 tonight and got:

  Error: Type was not found or was not a compilation constant: AlertDialog.

  The command I used to compile was:

  Set JAVA_HOME = e: files (x 86) \Java\jre7
  set PATH = % PATH %; E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0\bin

  CD E:\Users\Daniel\Dropbox\Apps\iTunesSync\Version0.3
  mxmlc + configname = air - library-path +=. iTunesSync.as o iTunesSync.swf - swf-version = 10

  This works if I use the SDK 2.0.0, but doesn't if I'm using 3.0.0.

  Strange.

  I confirmed that AlertDialog is always present:

  https://developer.BlackBerry.com/Air/beta/APIs/QNX/dialog/AlertDialog.html#includeExamplesSummary

  In BB10, device skins (and others) require the ANE must be loaded with the installation.