Primary way of database problem
I get the following error when I run ' alter database validation through in standby mode with the stop of the session ' in the primary databaseORA-16416 no target viable passage available physical standby
What can be the reason?
I use Oracle Server Standard Edition 11g R2
version: 11.2.0.1
Madhu.149 wrote:
Sorry for the late responseStandard edition wont support any features like Switchover, Arch/Redo transport. Have you configured only standby where archives will be transferred manually & applied? even still you cant perform switchover.
So I can finally come to a conclusion that the digital switchover is not possible in the standard edition
I'm generating archive in primary education and shifting manually in sleep mode.
The digital switchover is related to dataguard?
Also, the passage is possible without installation dataguard.
Yes, this is not possible. This feature is applicable only for Enterprise Edition and passage to the associated with DataGuard. The digital switchover is not possible with the standard edition.
Earlier, in my database of relief, switchover_status was "elementary school." But after I applied the archiving log, the switchover_status became "not allowed".
"And the results of the statement ALTER DATABASE COMMIT to SWITCH to STANDBY' ' always erred in elementary school.
Its because there is no database backup in the dataguard configuration primary from primary to standby and vice versa. Therefore, an expected behavior.
Tags: Database
Similar Questions
-
Several primary and physical databases Configuration ensures in Data Guard Broker
Hello
Is it possible to add two or several primary and physical databases configuration ensures in data guard broker?
I have 1 primary databases and two databases physical standby that is
(1) primary that is pri - (database primary)
(2) secondary i, e, s (physical pending)
(3) Secondary2 i.e. sec2 (physical pending)
Practical AM sinister place, my scenario is my pri and dry machines are in seat, if the pri crashed it switch to s that works very well and my S2 is in another area office. Suppose that if my two siege machines pri and sec crashed, so I want to do my mahcine sec2 as primary.
I have two separate computers to the broker a headquarters and a District Office
Use failure of quick start on Data Guard Broker, broker headquarters machine I have configured pri and dry but in sector office broker not able congifured pri and S2 and the machine.
can be done several primary database configuration with data bases on hold?
Has anyone done this before, or has a perform a recovery after loss of place...
need help or suggestion
thanx
No.... It is not possible. When you use the DG broker, the first thing you can do in the DGMGRL utility is to deliver CONFIGURATION to CREATE. You can see on the doc of this command that you define here the PRIMARY DATABASE.
The command to add a DATABASE to the broker, adds a new database pending. You cannot add an another primary.
The broker configuration is explicitly for a primary and all standby databases is supported. If you have an another primary, you create a separate DG broker configuration.
See you soon,.
Brian -
em12cr3 showing on the eve of the database problems
Oracle Enterprise Manager 12.1.0.3
Oracle RDBMS 11.2.0.4
I recently installed this very with a CMS and database repository on a server.
I added a cluster that has the database open as well as a database of pending which is in Mount that we do not use Active Data Guard.
To use EM with a vigil in the mount, the connection must be an account with SYSDBA. On the eve of one indicates the Type
Cluster - physical Standby database. It appears, however, with a Collection error metric for its database system, and I don't see why.
I moved add another cluster that also has opened with two STANDBYS in mount databases.
These guys, shows to monitor the credentials as dbsnmp and won't let me change it to SYS - this column is grayed out.
It did not work in 12.1.0.2 without problem, I'm just limited on the standby located in Mont - I agree with that.
I tried to drop and add because sometimes works with EM.
I tried emcli, as follows:
emcli get_targets | grep tecmop
0 oracle_database tecmop_tecmop1
0 oracle_database tecmop_tecmop2
2 tecmop_sys of metric oracle_dbsys collective
2 metric rac_database tecmop community
$ emcli set_monitoring_credential-target_name = "tecmop'-'rac_database' = target_type - set_name ="DBCreds"- cred_type ="DBCreds"- attributes = 'DBUserName:sys; DBRole:sysdba; DBPassword:mypswd ".
Follow-up of the credential set successfully.
This no longer works.
I opened a SR but have not had a response yet (it was a few hours). Maybe someone here has an idea to try?
After all this... Here is the ANSWER.
When standby is added to the EM, its composition is moved under the primary database system and database backup system is put in blackout.
The backup of database system is not necessary and must be deleted manually. The GUI returns an error, then emcli:
emcli delete_target-name = "trptwp_sys" - type = "oracle_dbsys".
should be used to remove it.
It is a "expected behavior", although I'm not sure that it should! Not me because this happened to 12.1.0.2.
In any case, I hope that manually delete the backup of database systems are in agreement and they are not necessary for what.
-
Primary and standby database: same Oracle version?
Hello
We need to create a database of pending in our new data center. The database primary is version Oracle 9.2.0.8 - but only Oracle version 9.2.0.5.0 is installed on the server for the backup site.
Is supported by Oracle anyway? No need to say that in the version 9.2.0.5.0 can be some bugs and other problems which are already fixed in 9.2.0.8.
Would be great if someone could provide the use with a response and a link to Oracle documentation which States: must be the same version or not.
Any help will be appreciated!
Rgds
Jan
Hello again;
I'm sure that this note covers:
9i Data Guard FAQ [ID 233509.1]
I can't post the note because of my support contract.
Best regards
mseberg
-
Comparison of database problem
Hello
I have a problem when I have a source database and it consists of about 30 tables.
(Not only 1 database, I have many source databases and the tables are even more)
Initially I copy all tables with data in my database of destination.
Later, for every 10 (or) 15 days, I need to get a dump of my source database
such as only the lines which are updates to the source database tables must be exported.
While I would like to add that the lines of my destination database tables.
Is there a solution for it, instead of going to each table
and make surgery less to see what are the lines updated in each table.
Is it an effective way to do it. Because my paintings consists of about 0.2-0.3 million records.
My Oracle 10 g database is.You need replication. For example, Oracle Golden Gate or advanced replication. It will replicate all the changes almost immediately and transparent for all users.
Or if you have a column with the last updated date in your tables, create indexes on this column and use it to export data with exp/expdp/database link... or any other tool you are able to use.
-
DataGuard no synchronization between the primary and Standby databases
Dear Sir
If the database is a central problem of corruption in a given segment, an index for example, the synchronization process is always for the other node?
I found a problem, because the primary database has been altered and block synchronization occurred, because the sequences were in the same paragraph, for making the switch and newspapers registered in the database side, we had problems because the details were not in the second node, so we have problems because the information contained in an instance that was not high school.
In the Bank primary block has been altered, but not in the secondary block has been altered, you can be?
Now we have a database with information not included in the other cases, it takes using SQL commands to migrate data from one instance to another.
Thank you,
AlexanderIn the Bank primary block has been altered, but not in the secondary block has been altered, you can be?
"Corrupted" means the database down? The exact error message after your get?
Thank you
-
Hi all
I recently downloaded the software from the Sansa website and now my drive which has been has been upgraded to Version 01.02.24A. Whenever I turn on the drive I have to wait five minutes while it updates the database.
Anyway I can fix this problem. Thanks in advance.
Richard
Install rockbox and use the file display. Then you can say "see ya" to screen database refresh feared forever.
-
Unlike used MB of available space in the ASM disk between primary and standby database group
Hi all
We are seeing a difference in ASM disk group DATA1 USED_MB between elementary school a Standby.Its an AAM.4 node RAC
Primary
-------
NAME TOTAL USED GB FREE GB REQUIRED FREE GB USABLE % USABLE free of CHARGE (GB)
------------------------------ ------------ ------------ ------------ ---------------- ---------------- --------------
Data1 141 534 66 082 75 452 15 726 42.0 59 726
DATA_XDP501 17 766 11 635 6 131 2 538 3 593 20.0
Standby
NAME TOTAL USED GB FREE GB REQUIRED FREE GB USABLE % USABLE FREE (GB)
------------------------------ ------------ ------------ ------------ ---------------- ---------------- --------------
Data1 141 534 57 059 84 475 15 726 68 749 49.0
DATA_XDP801 17 766 11 781 5 985 2 538 3 447 19.0
Mode standby is runnig like
OPEN_MODE
--------------------
READ ONLY TO APPLY
Some body give an overview on what could be the purpose or specific controls will help
Thank you
Soundar.M
Hello
You can run sql in below document ASM sqlplus.
Then, you will come to know which files are files of redundent on ASM diskgroup.
HOW to map ASM FILES WITH FILES of DATABASE ONLINE (Doc ID 552082.1)
Delete these additional level of the DSO files, then validate.
Kind regards
Loriette -
We have a problem with HFM by which the database increases each month. We notice that
most of the scenarios where we might have to do a force to translate or to consolidate
with data and sometimes a consolidate all this. I know that consolidate it all the
is not good, but it is sometimes necessary for some scenarios. I expect to
growth of this with things based on dormant entities,
etc, but not insofar as I see in the DB. Doing some more
investigation, it seems that we have a significant amount of zeros in these tables
where we see growth. For example, our scenario scheduled for 2014 has 7.4
millions of documents of which 5.5 million are zeros (tran type 32) hard. I have
don't know much about these hard or derivative zeros, beyond because they do
no result I think that actually enter zeros. If I do an extract from the data
of the whole of the year and the scenario, I get a few zeros but not anywhere nearby
from what I can see in the database. No one knows what might happen? Help or direction would be so appreciated. Thank you.Hello
Please check if you have accounts for the calculation of the zeros.
You can limit the flight of zeros in your application by using the HFM rules file.
Let me know if you need more information.
Kind regards
Hanane
-
Hello
I've recently upgraded from 5.0 to 5.5 U1 (including correction of bug heartbleed) and will have what I believe are from the database. The services start and I am able to connect through the vSphere client and web interface. The problem comes when I try to create a new virtual machine. All the steps to cross, but it hangs at 100% when he says 'Configuration of the Virtual Machine to copy' and my vSphere client disconnects. Then, I get an error: "connection to the server '< servername >' has been lost while finishing the last command. Confirm that the command was completed successfully. Then I get "sessions of the application is not valid. Looking at the vpxd -n.log, I see:
MEM > 2014-04-29T 14: 05:34.531 - 04:00 [warning 07000 'Default'] [VdbStatement] SQL execution failed: insert into VPX_TABLE (TABLE_NAME, Column, COL_TYPE, COL_LEN, PK_FLG) values (?,?,?,?,?)
MEM > 2014-04-29T 14: 05:34.531 - 04:00 [warning 07000 'Default'] [VdbStatement] run time: 0 ms
MEM > 2014-04-29T 14: 05:34.532 - 04:00 [warning 07000 'Default'] [VdbStatement] given the driver diagnosis are 07002:1:0: [Microsoft] [SQL Server Native Client 11.0] incorrect field COUNT or syntax error
MEM > 2014-04-29T 14: 05:34.532 - 04:00 [warning 07000 "Default"] binding settings [VdbStatement]:
MEM > 2014-04-29T 14: 05:34.532 - 04:00 [error 07000 'Default'] [Vdb::IsRecoverableErrorCode] Impossible to recover from 07002:0
MEM > 2014-04-29T 14: 05:34.532 - 04:00 [error 07000 "Default"] SQLError [VdbStatement] has been lifted: "ODBC error: (07002) - [Microsoft] [SQL Server Native Client 11.0] COUNT field incorrect or syntax error" is returned when you run the SQL statement "insert into VPX_TABLE (TABLE_NAME, Column, COL_TYPE, COL_LEN, PK_FLG) values (?,?,?,?,?)".
MEM > 2014-04-29T 14: 05:34.539 - 04:00 [error 07000 'Default'] [VdbSchemaLoader::StoreTableSchemaInfoToDB] error insertion in VPX_TABLE for table VPX_NW_ASSIGNMENT: "ODBC error: (07002) - [Microsoft] [SQL Server Native Client 11.0] COUNT field incorrect or syntax error" is returned when you run the SQL statement "insert into VPX_TABLE (TABLE_NAME, Column, COL_TYPE, COL_LEN, PK_FLG) values (?,?,?,?,?)".
MEM > 2014-04-29T 14: 05:34.539 - 04:00 [error 07000 'Default'] [VdbTableDef::PopulateSchemaInfo] unable to retrieve the column information for the table VPX_NW_ASSIGNMENT. Usually, it is the result of an incompatibility between the DB scheme and construction product.
MEM > 2014-04-29T 14: 06:12.830 - 04:00 [07000 panic "Default"] (level 2 of the recursion of the newspapers) [VdbTableDef::PopulateSchemaInfo] out. Could not retrieve schema information.
I have setup a service account for the following services: "VMware VirtualCenter Management Web Services", "VMware Virtual Center Server", and "vSphere VMware Update Manager Service". " The account is a domain account and is a member of the local Administrators group. It seems that the service doesn't have access to write to the database, but when I look at the effective permissions of database for the service account, there a lot of ALTER and INSERT permissions. Any help would be greatly appreciated.
TIA
It turns out that the service account did not have the default schema of dbo. That solved the problem
-
implement a RMAN script in a cron job with a cold way of database
Hello
I want to run the Rman script in a cron job. But my question is: is it possible to make a backup of cold with the editing of the database and change at the end of the backup?
here my sample rman script
#! / bin/ksh
export ORACLE_SID = test
ORACLE_HOME=/U01/app/Oracle/product/11.2.0/dbhome_1; Export ORACLE_HOME
PATH = / usr/sbin: $PATH: $ORACLE_HOME/bin. export PATH
ORACLE_HOME/bin/rman target = / < < EOF
Run {}
SQL! connect / as sysdba;
SQL! stop immediately;
SQL! Startup mount;
allocate channels ch1 disc type
disc format ' / u01/app/oracle/backup/full_%d_T%T_s%s_p%p'(database).
backup database archivelog;
remove obsolete;
output channel ch1
SQL! alter database open
}
"exit";
EXPRESSIONS OF FOLKLORE
Thank you
Hello
No problem, when you use the rman target / it to connect with the RMAN and RMAN fast turns. You can change your order something like that
#! / bin/ksh
export ORACLE_SID = test
ORACLE_HOME=/U01/app/Oracle/product/11.2.0/dbhome_1; Export ORACLE_HOME
PATH = / usr/sbin: $PATH: $ORACLE_HOME/bin. export PATH
ORACLE_HOME/bin/rman target = /.<>
Run {}
stop immediately;
bootable media;
allocate channels ch1 disc type
format ' / u01/app/oracle/backup/full_%d_T%T_s%s_p%p';
backup database archivelog;
remove obsolete;
output channel ch1.
ALTER database open;
}
"exit";
EXPRESSIONS OF FOLKLORE
HTH
-
The database with the relevant tables looks like this:
http://i.imgur.com/JewUS.PNG
I need help to create these 2 triggers for the return_date field.
Create a trigger to insert FRONT check should not be seized.
Create an AFTER UPDATE trigger, when changed from null to a date, beat all records of Stock and available.create or replace TRIGGER trig_return_date2 BEFORE INSERT ON hire FOR EACH ROW BEGIN IF :NEW.hir_returndate IS NOT NULL THEN raise_application_error (-20900, 'Cannot be entered'); END IF; END;
They are compiled fine, but I don't know how to check for them if I can't insert into column return_date. How would the return_date changed to a DATE if it cannot be entered. Am I suppose to insert data into the STOCK_HIRE table, or just the RENTAL table, when a person goes to rent a DVD. Or is the composite table of STOCK_HIRE guess to retrieve and insert automatically the data in the table STOCK / RENTAL.create or replace TRIGGER trig_return_date3 AFTER UPDATE ON hire FOR EACH ROW BEGIN IF :NEW.hir_returndate IS NOT NULL THEN UPDATE stock sto SET sto.sto_available = 'Y' WHERE EXISTS (SELECT null FROM stock_hire sth WHERE sth.stohir_sto_id = sto.sto_id AND sth.stohir_hir_id = :new.hir_id ); END IF; END;
Hello
Minecraft addict wrote:
The database with the relevant tables looks like this:
http://i.imgur.com/JewUS.PNGDisplay all relevant information in the message of yiour.
Whenever you have a problem, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and the desired results from these data.
In the case of an operation DML (for example, INSERT, or UPDATE), the sample data should show what looks like the tables before the DML, and results will be the content of the or the tables changed after the DML. If the problem is with the triggers, post some DML statements that would cause triggers to fire and content tables changed after each of them.
Explain, using specific examples, how you get these results from these data.
Always tell what version of Oracle you are using.I need help to create these 2 triggers for the return_date field.
Create a trigger to insert FRONT check should not be seized.
create or replace TRIGGER trig_return_date2 BEFORE INSERT ON hire FOR EACH ROW BEGIN IF :NEW.hir_returndate IS NOT NULL THEN raise_application_error (-20900, 'Cannot be entered'); END IF; END;
Create an AFTER UPDATE trigger, when changed from null to a date.
Whne is changeed to NULL for a date? hir_returndate?
the value all records associated with the available stock.
create or replace TRIGGER trig_return_date3 AFTER UPDATE ON hire FOR EACH ROW BEGIN IF :NEW.hir_returndate IS NOT NULL THEN UPDATE stock sto SET sto.sto_available = 'Y' WHERE EXISTS (SELECT null FROM stock_hire sth WHERE sth.stohir_sto_id = sto.sto_id AND sth.stohir_hir_id = :new.hir_id ); END IF; END;
They are compiled fine, but I don't know how to check for them if I can't insert into column return_date. How would the return_date changed to a DATE if it cannot be entered.
The BEFORE INSERT trigger fires when INSERTING. You can INSERT a line with hir_returndate and then update the line for hir_returndate set to NULL and then update the line once again, to change the hir_returndate to a value.
Am I suppose to insert data into the STOCK_HIRE table, or just the RENTAL table, when a person goes to rent a DVD. Or is the composite table of STOCK_HIRE guess to retrieve and insert automatically the data in the table STOCK / RENTAL.
Those are all fine with me. Do you have anything in particular you're trying to do? It is always helpful if you will contact appropriate columns of mean. Is hir_returndate the date when a rental was returned? If so, why can it be NULL when ren tal is inserted in rental? Would be unwise to have a trigger saying that hir_returndate has to be set to NULL when a new line is inserted, rather than a trigger that it must not be null?
-
Startup database problems.
Hi people,
I tried to start the database after after applying the opatch
where I am not able to open the database
SQL > startup
ORACLE instance started.
Total System Global Area 536870912 bytes
Bytes of size 1262788 fixed
167775036 variable size bytes
360710144 of database buffers bytes
Redo buffers 7122944 bytes
Mounted database.
ORA-01092: ORACLE instance is complete. Disconnection forced
Could someone provide any suggestion.
Thank youHello
Alert content will show exactly what the problem is. This patch that has been and execute all post install script in the database? You need to start the database upgrade required running post install script mode.Salman
-
synchronization between the primary and standby database
Hi all
We have 2 database, we have 2 requirment
(1) making a primary database and secondly of Eve
(2) synchronization only differential data betwwen the primary and secondary daily.
Please help meHello
What is the physical standby?
Do you have the chance to look over the physics of the standby database.
You just need to apply daily archived file generated to the standby database. This can be done manually or automatically through data guard.Concerning
Anurag -
version 10g / 11g
I have to recreate repository dbconsole whenever I re - start machine, + sound taking the most CPU + memory resource on the server, looking for tips to solve these 2 problems... I don't want to re - create, drop/create again and again... and how I can configure it shouldn't take high CPU + memory resurces...
I have normally just re-create by following these steps
http://www.Oracle-base.com/articles/Misc/BasicEnterpriseManagerTroubleshooting.phpDBA2008 wrote:
several operating systems like windows, linux & aix
I'm unable to start dbconsole & receive errors...And these errors would be what?
To hazard a guess yet almost nothing in the way of firm diagnosis, I'd be willing to bet that this server running DHCP, so IP address changes everytime you top up - and the dbcontrol is sensitive to the IP address.
Maybe you are looking for
-
Why is iPad slow to load?
WWhy the IPad is slow to load?
-
can you please tell me if I need this update thing called sonic? for my system or can I delete it?
-
How is it OS install (c.) has less GB of data (D ;) on my laptop
ORIGINAL TITLE: More or less memory How is it OS install (c.) has less GB of data (D ;) on my laptop
-
Driver software device not installed
I have a Compac Presario with a disc of R/RW Optiarc AD - 7201S 5. My computer cannot read the discs. I opened the Device Manager, uninstalled the software driver Optiarc, rebooted, hoping the driver to reinstall. I am now getting the error "drive
-
ERROR MESSAGE "THE FAN DOES NOT.
As my system there is this message on the screen- "The system has detected that a cooling fan does not work correctly. -(90B) SYSTEM FAN Continued operation is not recommended and can result in unpredictable behavior that may cause stop randomly, los