Print CD C5580 all-in-one

Similar Questions

• Printer (Photosmart C5580 all in one will not accept the #75 color cartridge)

  Screen on the printer says "cartridge in the slot on the left is not intended for use in this printer.  Remove and replace.
  It's the exact same cartridge as empty.  There is a flashing yellow light next to the sign +.  I tried
  unplug and plug in again.  I put the old cartridge in.  I turned printer off and back on.
  Nothing seems to help.

  Any suggestions will be appreciated

  Hello

  As it is a hardware problem, I suggest you contact HP support for assistance on this issue:

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  It may be useful

• C5580 all-in-One Photosmart Pr: c5580 print usually

  I have a Photosmart C5580 all-in-One printer stopped printing from my laptop for about a month before, i.e. December 2014.  An error flashed, but it disappeared before I could read it.  It will print

  When you copy something and it will show a diagnostic page that makes no sense for us.  We bought a new

  cord for it but that made no difference. The computer is a HP Pavilion dv7 laptop. AMD

  Turion (TM) X 2 Dual - Core Mobile RM-70 until it works very well.  Thanks for any help you can give

  Hello @SunnyCat11 and welcome to the Forums of HP!

  I see that you are having problems printing.  I would like to help!

  I recommend you to perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also run the following updates:

  Utility software update from HP

  Critical update

  Critical update to correct a PC Printer Communication issue

  Critical update for HP

  In addition, these pages are print after the document you copied, or instead of?

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Quality of printing on my HP Photosmart C5580 all in one is not very good

  Hello

  My parents have a HP Photosmart C5580 all-in-one printer.  Their old computer was running XP and the printer printed beautiful photo (using HP Photo paper).  The recently buy a new computer that is running Windows 7.  They called me after that that they got rid of their old computer XP.

  The problem is that the HP C5580 is no longer made a good job of photo printing.   I have been in their house and they owe me that the use of the printer to print then we have printed a new photo to the printer (which was horrible).  I then downloaded the latest drivers for Windows 7 from HP, installed and reprinted the image.

  The XP computer disappeared, so I've no idea what program they used to print photos.  I used Picas (latest version) to view and print the pictures on Windows 7.

  The new photos are very washed out. They remind me of the photos printed on the ink jet printer initially on plain paper.  They are not photographs.

  Anyone have any ideas to improve the quality of the photos?  If it is a better program than Picasa we should use to print the photo?  Is there a way to caliabrate the printer?

  Thank you

  Dennis

  Hi Dennis you have posted on the discussion of the ePrint/Mobile Forum so I'll ask that your post moved to the Printing Board Issues & troubleshooting in the hope that you receive relevant responses. In the meantime, I suggest that you check the ink levels in the supplies in the printer and print a diagnostic. You should be able to get it out in the printing software HP you have downloaded or directly from the front panel of the printer. If ink, levels are low in all of the test color cartridges to see if that solves the look "washed out" prints.

  Good luck.

• My c5580 all in one printer has a broad black band

  My c5580 all-in-one printer copies or scans have a broad black band along the right side of the paper when the scan or copy.  The scanner glass is clean and it seems that all the scanner bar lights are lit.  The printer prints fine fron the computer.  Scanning the computer shows the same black line

  is broken - is there a solution?

  Dennis811

  dennis811,

  I'm sorry to hear that it worked for you. If you need help with your options maintenance that you can join to support at 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://goo.gl/kQDB - for available options. Let me know if you have any additional questions.

  Good luck!

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.

• The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function?

  The printer software e-all-in-one HP Officejet 4620 includes scan-to-searchable PDF function? If not, all printers HP still have this feature?

  Hello

  Please try the following alternative:

  http://www.PDFCore.com/p01_advancedpdfutilitiesfree/feature_09.html

  Kind regards.

• Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Original title: Dell Printer 966 all in one

  Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Sam Soliman
  E-mail address is removed from the privacy *.

  You shouldn't if you get it from Dell.

• How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

  How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

  Jim go to settings on the 8600, click Preferences.

  There is an option DATE and HOUR.

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• 1315 all in one printer: my 1315 all in one printer shows "paper jam".

  My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

  Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

• Wirth problem Scanner printer HP Photosmart all-in-one.

  How can I activate the scanner on my HP photosmart all-in - one printer?

  How can I activate the scanner on my Photosmart all-in-one printer?

• Unable to install printer Deskjet F4280 all-in-one Windows Pro 8.1

  A week ago my laptop with Windows Pro 8.1 was a significant error and he stopped, then I restarted the operating system with a previous image of the hard drive C. I reinstalled another printer and I tried very time to reinstall the HP Deskjet F4280 all-in-one with the latest driver and with the installation of the Printer Wizard uploaded by HP web site. Unfortunately every time installation fails during step "product configuration" after a lot of minutes to expire. The error was the last time.

  CSetupWrapperApp: No section name specified on the command line
  = Application did not return ERROR_SUCCESS. Returned 0 x 1
  LaunchApp (x:\hpqtra08.exe-arret, 1, 00000000, 00000000) failed with 2
  Error opening key HKLM\SOFTWARE\Hewlett-Packard\Install\{8C925017-72A8-4C4A-AF21-84901E26638F}. error = 2
  Timed out waiting for event of finished product.

  I used your HP print and Scan doctor and I followed all instaructions and in the end, no solution has been discovered. Other applications normally run without problem and laptop works fine. I installed Windows Pro 8.1 almost a year ago and until a week ago, I have no problem with the HP printer above. I can solve this installation problem?

  Best regards

  Francesco Patrignani

  Multifunction,

  Thank you for the update. The registry document I sent should apply to all computers in Windows 8. Please try to follow these steps.

  If you do not provide the error log, which could be very useful. This will help me to refine the question. Also, I do not fear spend 20 minutes reading code until something is different.

  I will help you with pleasure until the issue is resolved. If you find my help, you can keep tagging my posts with congratulations and accepted Solutions. It would be appreciated.

  Have a great day!

  Mario

• Unable to print my F4580 all-in-one of my MacBook with OS x via USB

  Hi Forum,

  I have a HP F4580 all-in-one printer/scanner that worked fine on my old laptop with windows vista.

  The laptop is dead now so I thought I would try Apple.

  Now I need to print some stuff for work, but it does not produce anything.

  It is connected via usb and has been implemented on the Mac through the Preferences system and printer & Scanners icon, but when you click on print the document that you want the small printer icon on the dock at the bottom, but the printer does not ever print anything!

  Anyone know what I could do wrong or if it unifies works through OSX.

  Help, please.

  Much Willow1980 thanks

  No problem!

  I would recommend to fix permissions of the drive on your computer by following this document Apple here. Once this operation is complete, make sure that your Apple updates are done by following this document Apple here.

  Now, I would reset the print on your computer system. Please follow this document Apple here. If your USB connection does not correctly, follow this document Apple to USB: Troubleshooting Error Messages. I will seek forward to hearing from you again!

• Cannot print using the All in one 924 since filling of cartridges.

  Original title: all-in-one 924

  my printer is a dell all-in-one 924 photo and I had my cartridges refilled by a local ink store, however since I brought them home and put them in the printer the printer does not seem to recognize. I don't understand, can someone have an answer

  This occurs now and then with the refills and cartridges advantage trati. Many manufacturers of printers do not allow them so they can earn money from the outrageous prices they charge for new ones. Contact Dell.