Print jobs do not go out

Similar Questions

• queued print job does not cancel

  the print job that don't cancel out of the queue seems to be hungup in the deletion process and therefore does not allow something else to print.   PSC 1610 and windows 8

  Hello

  I suggest to uninstall the HP software and then reinstall the software from here.

  Also, are you connected with a USB cable? I would suggest trying another USB cord, that this might be the reason, you experience the problem.

• "Laserjet 1022n Windows Update", causing problems printing: print jobs do not print

  Hello

  A few days ago I installed upgrading Windows Laserjet 1022n on my Windows 7 64 bit and since then I can not print a page normally: the page does not print. I use a TCP/IP network port.

  I made several attempts to resolve this problem:

  -uninstall the printer driver and install it again (I tried the latest version on the HP site and an older one that worked perfectly before)

  -update the firmware of the printer to the latest version on the HP site.

  When I put the printer in pause and start the print job, you can see in the list. Resumption of the printer, printing starts on the printer but you see that the job remains in the list, flashes again and again. The printer keeps printing the same page.

  I don't know what I can do to solve this problem. There is no way to uninstall the update of the HP Laserjet 1022n software because it does not appear in the list of installed programs (course list is also op updates from windows updates).

  I have same problem printing to the same printer from another PC Windows 7 (with the same windows update done)

  But I have no problem printing with my laptop on an other network printers.

  Is there someone who has the same problem and how to solve?

  Thank you for answer

  I found the solution on this site: http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing

  Just uncheck the chekbox "enable two-way communication" on the "Ports" tab of the properties of the printer and it works normally again!

• HP Deskjet F4480: print job is not queue

  When you attempt to print from a program or a test page, nothing happens.  The print queue shows zero documents in the queue.  All the indicators are that the printer is working and connected, etc.  The print job simply is not in the queue.  There is nothing in the queue.  I emptied and stopped and started the spooler.  Restarted to hot and cold. Remove the printer and reinstalled. Zilch. * beep *?

  Hello

  Download and run the doctor for impression scanning HP from the below mentioned link. This should solve your problem.

  Find and fix common printer problems using the tools of diagnosis HP for Windows

  Kind regards

  Salam_E

• Print job will not clear

  I have a HP C4180 printer all-in-one - there is a print job in the queue that will not (said status deletion) delete and nothing I send after printing, but I can remove these print jobs.  I've done the troubleshooting - disconnect the printer usb, restarting it. By restarting the computer and still does not work.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• Print jobs may not reach the printer

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  If a draw is sent, he goes to Quebec, she disappears, but does not reach the printer. It shows the same problem even with the local administrator account.

  It is a network printer and works great for other users.

  Printer driver has been updated.

  Spooler service works very well

  No errors in the event logs.

  This paragraph is confusing.  The computer is now connected to a domain or not?

  I have a machine in which everything was working fine until he was not part of the domain. Since it was added to the field, he has stopped printing.

  The problem you describe appears if the printer port is not directed to the correct address.  This often happens with wireless printers, but if your computer is connected to a domain, you should ask your network administrator for assistance.

• print job is not accepted (mavericks of mac OS)

  Hi, my HP Laserjet P1102w used to work well, but he kept recently have error saying 'printer in use - use of the printer was not admitted. I'm on macbook pro and OS's mavericks.

  I don't know why I get this error message, since there is no jobs in the queue, and my printer seems to be installed, when I go to System Preferences. I also tried to reset, but the problem persists.

  I use wireless printing, since I can't use USB in this operating system.

  Any help would be appreciated - my printer has had a lot of problems when I tried to print wireless (mainly due to the loss of connection), and I really don't want to reprint problems!

  Hello

  Please try:

  http://support.Apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  Kind regards.

• HP LASERJET 4050: HP LASERJET 4050 PRINT JOBS WILL NOT PRINT FROM TRAY 2

  I have a HP Laserjet 4050 printer and it won't tank prnt 2.  It prints from the manual feed tray 1.  It does not recognize tray 2 printing, but it will let me know when the tiroir2 is missing.  No idea what this could be or how to fix it?

  Any help would be greatly appreciated.

  Toni

  If you print a configuration page using Tray 1, then you can look and see what paper size and type it thinks are in tray 2.

  You will see probably is one of these elements is bad and most likely it is misdetecting the size of the paper due to a failure of the Board of Directors that detects the position of the fingers on the side of the status bar.

  I think you have probably found a message on the screen that says load paper in Tray 1 whenever you try to print from tray 2, if this is the case it should also allow you to hit the go button and print using any type of paper or the size it considers is in tray 2.

• Print job in that cancel out?

  Running Win 7 pro 64-bit.
  Using USB hub compat with Win7 with two printers connected to a computer. Network/homegroup computers.
  Printers inherited with drivers from Win Update. (HP Laserjet4, Deskjet 1120c)
  Implement, printed 'test page' every summer with success. Print a file in Works 9 O.K.
  Changed computer it is place of permanent, tried everything pluged print... nothing, > tried again > print message in that > remove said > missing file > tried impression > "employment in Quebec" > delete >. Ran A convenience store he thought too that he has allowed that... it has no
  Uninstalled both printers. Machine to rebooted, reinstalled both printers
  tried printing test page. Says "for use in Quebec".
  Both suggestions appeared while I walked in this. Both were for Vista and do not apply to my situation.
  How can I clear this "work in Quebec?

  I think I found an easier way.
  I stumbled on "Print Management" buried in Win7Pro and managed to empty there.
  Help says he is "Management of printing for the it professional." This isn't me, but it worked.
  However I can't get the LJ4 and Deskjet printer to operate on a 4 hub of the post.
  A plug in sepparately to make them work.

• Print spooler does not. Unable to use printer

  Cannot print.  Cannot add a printer.  Can't download new drivers.  C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Want 7640: Must be able to use the print and scan doctor for each print job to get printing to work

  After works without any problem for several months, the printer now shows an error message whenever I try to print. I have to run the doctor print and scan so that the printer to function. The first time this has happened, he told me I have to uninstall and reinstall the program, I did. Since then, only the works of doctor print and scan running, but he running for each print job is not acceptable!

  Hi @Doug18,

  Thank you for joining the Forums of HP Support!

  I see that you are unable to print, except if you first run the PSDR. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that you have received the order to uninstall and reinstall the software that you have. When you now run the PSDR, she says you? I need to know the results (of the error messages, patches, etc.)?

  In the meantime, try the steps in these guides:

  • Printer is offline (Windows)
  • Print jobs stuck in the print queue (Windows)

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• ePrint is nolonger sending print jobs to the printer

  My B210A is fairly recent. I got it just for a few days. Shortly after putting up with the ePrint system, I was able to print a few test email attachments. I was delighted. But since there is no I was not ale to print more. I received several e-mails from the system saying anywhere from 'your print job prints soon' to 'your print job has been canceled. " In each case were that the print job was not automatacly cancelled or failed, I would wait for an hour or two, and when it does not print I go to the site and cancel it. I also tried using one of the applications of the printer. The application begins to 'download' the material requested app and after a while there is a very quick flash of an error that goes by so fast I can't read. Then the screen jumps to the home screen. When I check the ePrint Center site, it shows the printing jpb applications has been cancelled. The most recent electronic print job, I tried the return e-mail message said, "your print job has been received.  Printing has been delayed because the printer is currently busy, other print jobs. The printer is busy printing anything. All my difficulties around the ePrint System Center

  I would like to mention that I have the impression of very good luck to my mother, using AirPrint iPad and the HP iPrint Photo iPad application. I felt just as good luck using the HP iPrint Photo app on my Andriod tablet.

  --------------------------------------------------
  HP Photosmart more B210a

  There is absolutely no problem. Let me know if I can help others! And if it does not print, make sure that you mark this solution provided so that other customers can try .

• Cannot cancel queued print job

  I have an Officejet 4500 printer who was printing fine, and then I have a paper stuck in the print queue that I can't cancel.  I have: (1) printing cancelled printer several times - he says job is canceled, but then the power button flashes.  (2) turned repeatedly printer power switch and when I turn it back on again the same old print job starts printing again (and that's a big print job). (3) used HP-online tool to scan for the printer and it says everything is fine, but when I go to print a test page, the same old work printer starts printing again.  The only thing I did is removed the printer from my computer and reinstall the driver, but my concern is the print job does not appear in the my computer print queue and it is now at the printer (?).  Help!

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K