Print quality poor on the logos of the bitmap when printing from InDesign
We have a Mac studio. One of them prints this indesign document well, the quality of bitmap images appears as it does on the screen.
On all other Macs on the same printer, print the logos of the bitmap on the same document with a really poor quality.
Any ideas? It drives me crazy that have checked the settings of the printer, and it seems that they match the Mac to work.
Don't think it's a thing of driver as anything other than the bitmap to print logos and all other documents very well.
In the print options, you should also go to the poriton of "Graphics".
Make sure it is not set to the Proxy - make sure it is set to "Subsample Optimisied" or "All".
Tags: InDesign
Similar Questions
-
Possible to determine the size of the PDF when opens, from InDesign?
Is it possible to set up my book document and preset what size it will be when it opens in PDF format? Right now my exported book open very wide. I would lke to change this, if it is possible...
Hmmm, it must be that problem here. This is a bug with CS5, don't hold your breath so that it is fixed, work is about to export to PDF Print that gets you the bookmarks, and then add the appearance attributes in Acrobat that obviously, you do not have. If it's a stop I could do for you or you can download a trial but even if this bug is corrected you still cannot tell him to open with the Bookmarks panel to default as you can do in Acrobat format:
-
Hi all
I have a printing problem going on with a document that I am currently trying to print. When you export to PDF (high quality print or press quality setting, as well as to any possible color output) and then print, black my document go to the gray and the images look washed out. This does not happen if I print directly from InDesign on my printer. I tried to change the merger of transparent space, change the color profiles document and corresponding to export options to the options used when you print directly from ID, all without success. the document is always printed wrong when exporting to PDF first. Any ideas why this might happen when exporting or printing to PDF, but not when you print directly from ID? Thanks in advance for any help!
I see. Is there a way to ID artificially add CMY export in the same way as it does when sending to print?
Is the destination of the document a composite digital printer or an offset press? If it is composite set your black preference for export fills and convert to RGB on export:
In Acrobat, the two blacks will be 0. 0 | 0 RGB and will display the same
-
How to get the name of the element when running from popup menue?
Hello
I am using the 10.2 forms and a form with 2 listitems (mouse and keyboard navigable = No./false) with the same popup menu.
When I'm currently running then menu-trigger point: system.mouse_item is not defined and: system.cursor_item the value von hase something else.
How to get the itemname of the element that is currently leading the context menu?
RobertHello!
Can create a PRE-POPUP-MENU trigger on block level
with a call to go_item (: system.mouse_item)
You know, you're on what item in the list when the context menu is active.
Concerning -
HP Photosmart 7280 C: Jam printer when printing from InDesign
I seem to be able to print anything, except when a print to InDesign file. When I try, I get a paper jam?
Hello
You use a different type of paper to print with InDesign? The program itself can cause the paper jam, but maybe the settings or the paper you are using are the cause of the problem. I often print on thicker or InDesign photo paper and usually just put a sheet in the printer at a time to help with jams and paper pick up questions.
Please report parameters and the type of paper you are using to help find a solution. Thank you!
-
Export PDF printing from InDesign CS5
Until last week, when exporting an InDesign CS5 document in PDF format, it was a choice of Print or Interactive. Now, there is no other choice and it assumes that the PDF is Interactive and gives to think I have change the color mode to my RGB document, which I won't do. Help!
If the PDF (Print) option is missing file type form the drop-down list in the dialog box, see 101 troubleshooting: replace, or 'trash' preferences
-
Printing from InDesign for Epson Stylus Photo R3000
In InDesign CS4 when I go to print to my new Epson Stylus Photo R3000, I don't see any options necessary to select types of paper, color or black, IPR, etc. in the printing establishment of Project dialog Panel.
However, when I use Quark I see all the options I need. Surely InDesign should have them too?
Please can someone hepl?
Thank you very much.
Oh, re-read your messages earlier, you say:
Dialog box comes under 'General' at the top by "Printer" the only option that he has 'Epson Stylus Photo R3000' which is the printer I have.
and then separately:
Yes, but if you hit 'printer' in InDesign all you get is a dialog box saying use of InDesign print dialog box to "avoid conflicts of impression. Then you are taken back to square one where you cannot select the printer determine color and therefore cannot choose the types of paper etc.
Are you saying when you hit a printer you get this? :
If Yes, then you have to hit the triangle I circled in green, to get to this:
And you should get a whole lot of choice in the drop-down list of oval-surrounded. Some may be specific to a printer, and some cannot.
Is not what you get? If this isn't the case, maybe you should post a screenshot.
I'm not really convinced that the choice of the color in the InDesign print area management has much to do with what you want to accomplish. Certainly, it should not influence selection paper. for example.
-
Bad quality tests in the browser when imported into Adobe jpeg frames using animate CC
I am experienced with After Effects and Photoshop, but just to start using CC animate.
I make a very simple game, and I want to create my assets and the cinematics in AE and PSD. When exporting to AE, I convert my animation in a JPEG sequence film at 24 fps and import these images in the chronology of the YEAR. When the export of the PSD, I export characters and backgrounds and interpolation of their movements on the stage of the YEAR.
The result looks great on the stage within the YEAR, but totally pixelated, ringed and horrible in browser tests. That's the bad news, because this game will eventually be incorporated into a Web page.
Tests are simply bad quality and should not worry about this? Is there another way to use the content in the various programs that I don't know? Am I supposed to be able to import the .mov files? (I don't think). Any JPEG files to the timeline just too much information for a browser to handle and so all just happy to be created inside the YEAR AP?
Disable spritesheets in publication settings.
-
Get the error when switching from table
Hi allI'm moving my procedure table values but no luck. your help in this regard will be highly appreciated. Thanks in advance.
I created the following procedure:
-------------
CREATE OR REPLACE PROCEDURE send_coll
IS
TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;
v_dept_no c_dept_no: = c_dept_no();
BEGIN
SELECT DeptNo
TO COLLECT FEES IN BULK
IN v_dept_no
EMP;
END;
------------------------
Now, I want to spend all the values of v_dept_no to one of my name of the procedure as rec_coll that receives the value of v_dept_no and print the value against v_dept_no. for example:
When v_dept_no = 10 then print all empno against deptno 10 and so on...
I think I have to do something like below but no luck so far.
CREATE OR REPLACE PROCEDURE send_coll
IS
TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;
v_dept_no c_dept_no: = c_dept_no();
BEGIN
SELECT DeptNo
TO COLLECT FEES IN BULK
IN v_dept_no
EMP;
I'm looping 1.v_dept_no
rec_coll (v_dept_no (i)); - call the rec_coll procedure and pass in the value
end loop;
end;
---------------
create another procedure that will receive the value for v_dept_no
------------
CREATE OR REPLACE PROCEDURE rec_coll (v_emp_no c_dept_no) - create collection with c_dept_no type
IS
BEGIN
I'm looping 1.v_emp_no.count
dbms_output.put_line (v_emp_no (i));
END loop;
END;
-----------
I get the error message to create these procedures and if someone help me so I really appreciate it. Thank you
Concerning
Shu
I would just write a single SELECT statement joining EMP and Dept. If this exercise is University (collections of learning PL/SQL types), then you can do something like that.
I used a PACKET to this implementation. Again, this is not how things are done in the real world.
SQL > create or replace package coll_pkg
2 as
3 type dept_no_tbl is table of the dept.deptno%type;
4
5 procedure rec_coll (p_dept_no in dept_no_tbl);
6 procedure send_coll;
7 end;
8.Package created.
SQL > show err
No errors.SQL > create or replace package body coll_pkg
2 as
3 procedure rec_coll (p_dept_no in dept_no_tbl)
4 is
5. start
6 because me in 1.p_dept_no.count
7 loop
8 d in)
9 select empno, ename
10 of PEM
11 where deptno = p_dept_no (i)
12 )
loop 13
14 dbms_output.put_line (p_dept_no (i) |) ':' || j.EmpNo | ':' || j.ename);
15 end loop;
16 end loop;
end 17;
18
procedure send_coll 19
20 is
21 l_dept_no dept_no_tbl: = dept_no_tbl();
start at 22
23 deptno select bulk collect into l_dept_no
24 of the Department;
25
26 rec_coll (l_dept_no);
27 end;
28 end;
29.Package body created.
SQL > show err
No errors.SQL > set serveroutput on
SQL > exec coll_pkg.send_coll
10:7782:CLARK
10:7839:KING
20:7369:SMITH
20:7566:JONES
20:7788:SCOTT
20:7876:ADAMS
30:7499:ALLEN
30:7521:WARD
30:7654:MARTIN
30:7698:BLAKE
30:7844:TURNERPL/SQL procedure successfully completed.
SQL >
-
Skip the password when returning from sleep
I'm really embarrassed to ask this question again.
Shorlly after that I first set up my mini ipad4 I did something that allowed me to go to the lock screen directly without having to give a password every time the Ipad is awake or started cold... For the life of me I don't remember how I did it I can't find the "how to" instructions, I found on the web somewhere. I need this because I just do a restore to Icloud and the device wants a password to access the lock screen every time.
Could someone please refresh my memory so that I don't have to type in the access code?
Thank you very much.
Do you mean open the iPad and get to the home screen of the iPad without having to enter a password? If you do then settings > password > (enter password) > disable password
-
See above
-> Tap ALT key or press F10 to display the Menu bar
-> go to the Tools Menu-> Options-> content-> remove the check mark from block pop-up Windows
-> go to the Tools Menu-> Options-> Security-> place the check on:
1 warn me when sites try to install 2 modules) block reported attack sites 3) all declared fake web
-> go to the Tools Menu-> Options-> advanced-> general-> remove the check mark from the warn me when sites Web try to redirect or reload the page
-> Click OK in the Options window
Check and tell if its working.
-
Firefox comes back to the top of the page when returning from a url why
Hello
When you use a search engine like google and by selecting a web site, when I use the left arrow to return to the results of my search for the web page is at the top of the list of the sites found not where I was down for.
A slight but pain can it be set to return to the initial position of the page?
Thank you
Arnak
Why not open each search result in a new tab and close each tab when you are done with it, instead of going forward and back in the same tab? The original search page will not need to reload each time you return.
-
I use a Win7 box with a Machine virtual Win7 on it. When I started using the VM, it should start and login and work very well. Shortly after I started having the following problem. It loads in windowed mode, so I me the welcome greenish\blueish after cutting inside. If I wait for the Office to load, when I do the full VM screen, it goes full screen then the screen goes to the Welcome screen again, but it's just a static image. It won't change until I have send a Ctrl-Alt-Del command. Can I get the normal window with options for logging, start the Task Manager, etc.. If I press ESC or click Cancel, it will show the office and I can work on it without problem.
If I leave full screen mode windowed after that, the same thing happens, except instead of the Welcome screen, I get the screen of Ctl-Alt-Del as a static picture. Once again, if I send the Ctrl-Alt-Del command, then cancel, I get the office as usual and it will work until I have try to resize the screen again.
Can someone help me understand what is happening?
Thanks in advance,
Joe
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
Hope this information helps.
-
How to resize the Bitmap when running?
Hello
I created a Bitmap that reads directly from a file. The actual size of the image (test.png) is 360 x 50. I displayed this bitmap image in a BitmapField. Now, I want to display this image in my application so that it should take the width of the screen and adjust (expand or compress) so based on the TILT of the device (in the case of BB storm). My code is as below:
{ Bitmap image = Bitmap.getBitmapResource("mainmenu_green.png"); BitmapField bmpMainMenu = new BitmapField(image); MenuScreenVFM verticalManager = new MenuScreenVFM(); verticalManager.add(bmpMainMenu); add(verticalManager ); } //MenuScreenVFM Class.. static class MenuScreenVFM extends VerticalFieldManager { // Constructor private MenuScreenVFM() { super(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR | VerticalFieldManager.FIELD_HCENTER); } net.rim.device.api.ui.container.VerticalFieldManager#sublayout(int,int) */ protected void sublayout(int width, int height) { int nTop = 65; Field field = getField(0); layoutChild(field, Display.getWidth(), 40); setPositionChild(field, 0, nTop); setExtent( Display.getWidth(), Display.getHeight()); } }
The image must stretch/compress based on the width of the screen. Any info/code would be really appreciated.
Thank you
-DK
I created a CustomBitmapField extends the field and for the scaling of the image, I used the following code:
public static EncodedImage scaleImageToWidth(EncodedImage encoded, int newWidth) { return scaleToFactor(encoded, encoded.getWidth(), newWidth); } public static EncodedImage scaleImageToHeight(EncodedImage encoded, int newHeight) { return scaleToFactor(encoded, encoded.getHeight(), newHeight); } public static EncodedImage scaleToFactor(EncodedImage encoded, int curSize, int newSize) { int numerator = Fixed32.toFP(curSize); int denominator = Fixed32.toFP(newSize); int scale = Fixed32.div(numerator, denominator); return encoded.scaleImage32(scale, scale); } protected void paint(Graphics graphics) { graphics.setColor(backgroundColour); graphics.drawImage(0, 0, Display.getWidth(), fieldHeight, this.scaleImageToWidth(bmpBG, Display.getWidth()), 0, 0, 0); }
I would like to know if it works... If works please set Bravo... that will encourage those who post the solution
Kind regards
-DK
-
Restart the computer when returning from hibernation
I'm a noob to PC, with a renovated 3440 of Dell with Windows 7 Professional. I have problems with my computer restart when he returned after hibernation. I looked on other posts, and it seems as if others have had the same trouble. Unfortunately, I don't know enough to understand the explanations.
The error message I receive after reboot is as follows:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033More information about the problem:
BCCode: 7A
BCP1: FFFFF6FC50010370
BCP2: FFFFFFFFC00000C0
BCP3: 0000000011065880
BCP4: FFFFF8A00206E000
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\051114-16099-01.dmp
C:\Users\Tony\AppData\Local\Temp\WER-58266-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt--
Help, please. Thank you!
td3323
Although not directly involved in accidents, the referenced third-party only processes are mcshield.exe and mctray.exe, both belonging to The Antivirus Mcafee and Trend micro tmlisten.exe.
It seems that you have items of Trend micro remaining on your system and causing corruption and the issue of the conflict with Mcafee.
Error_code: (NTSTATUS) 0xc00000c0 - this device does not exist.
BUGCHECK_STR: 0x7a_c00000c0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
Nom_processus: McTray.exe (Mcafee AV)
CURRENT_IRQL: 0
Error_code: (NTSTATUS) 0xc00000c0 - this device does not exist.
BUGCHECK_STR: 0x7a_c00000c0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
Nom_processus: TmListen.exe (trend micro)
CURRENT_IRQL: 0
Remove Mcafee completely, the remains of Trend micro cleaning and replace with Microsoft Security Essentials.
McAfee uninstall utility
http://service.McAfee.com/FAQDocument.aspx?ID=TS101331
Uninstall Trend Micro program thanks to the Trend Micro Diagnostic Toolkit
http://eSupport.trendmicro.com/solution/en-us/1037161.aspx
Microsoft security essentials.
http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
Run the Chkdsk command from an elevated command prompt window.
CHKDSK c: /r
You also can run the memory test (memtest86). Check the initial link predict how.
Let us know the results of the tests.
Maybe you are looking for
-
How can I go about it?
-
Why do I send you my MacBook, iPad and iPhone for you to replace my defective charger?
So I just got a replacement wall chargers for my devices under the Exchange program of the taken wall Apple AC adapter (see https://www.apple.com/au/support/ac-wallplug-adapter/) When I followed the process after you have clicked on "Request a replac
-
Difference between 0 and static NAT
Hello I have a question about the difference of the ' nat 0' command and control 'static '. Let's say I have an internal host with address A.B.C.D. It is a public (not private) address. I want internet hosts to access this internal host A.B.C.D. Give
-
How to activate the touch screen on Windows 8.
Original title: How can I activate this touch screen of toa How can I make my computer a touch screen
-
CS6MC MacBook Pro retina, as DW040 error codes. Any ideas?
Hello. Call from Norway. I'm trying to help my son installation a CS6MC he got to school today. It s on a brand new MacBook Pro of the retina, 2, 7Ghz, 8 GB of Ram. I've been around the Internet for advice. and I've tried a few, but I always like DW0