Restart the computer when returning from hibernation

Similar Questions

• Restart the computer when a program does not

  Hello

  I'm using Labview 2011 and 2014.

  I put windows to start my program when the computer is turned on. The VI is set so that the program runs at the launch. Things have been works well for many ON / OFF sequences of the computer. But the last time when, coming back to the screen, I realized that the program did not work (as if she was waiting for the user based on the white arrow). I pressed the white arrow and the program worked fine. I started the computer and everything worked too. This program is supposed to run far enough away from work where I don't have access to the computer (not able to check if things are okay..)

  My question is: how could I make the computer do a sequence of Stop and Start if my program stops or is not running?

  Thank you.

  User

  Given that it looks like your application simply stopped normally, I would add in an Exec System call to reset your computer.  Is the command that you want to restart the computer

  shutdown /r /t 0
  

• Restart the computer when changing the channel of live TV

  I am running Windows Media Center 2002 Service pack 3 on my computer.  The computer is connected directly to the cable (without box) line.  The computer is a HP 873n.

  I ran the TV setup in windows Media Center, but when I try to change the channel, the computer restarts.

  The absence of a digital tuner would cause the reset of the computer?  If so, what tuner would be compatible with the computer so I can install it?

  You need the Digital Terminal Adapter box that offers to Comcast. You should be
  able to get free of charge. See
  http://digitalmediaphile.com/index.php/tips-tricks-how-tos/Comcast-DTA-MCE-setup-steps/
   
  Friday, November 12, 2010, 03:16:04 + 0000, charipar wrote:
   
  >
  >
  > Great!  Thanks for all your help!  I really appreciate it!
  >
  > Update driver cured the problem.  I looked at your link, but it doesn't look like this tuner works with XP.  I'll get around.  I'm assuming that just because this computer has an analog tuner, it cannot get signal from comcast.  I just static on all channels (there no box, just connected directly to the coaxial cable.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Restart the computer when attempting to open large JPEG created by Lightroom

  Hello, I'm trying to export an image to make a wrapped canvas. On the export screen, I select 36 x 24 "at 300 dpi, jpg, sRGB. Lightroom exports in my folder. However, when I try to open the file, the computer restarts. Material of my iMac should not be a problem and has never been. I tried this with other files and it does the same thing (so I know this isn't a corrupted file. In addition, I can export more smaller sizes and tiff without problem. I ran diagnostics and contacted apple. He confirmed that it is probably a problem of LR. Someone at - it a wisdom? Thank you, the customer waits patiently.

  stephens85583839 wrote:

  • Of the NEF (nikon RAW) in Jpeg format.
  • LR 5.7
  • IMac late 2013,
    • OS X Yosemite 10.10.3
    • 3.4 GHz Intel Core i5
    • 16 GB 1600 MHz DDR3
    • NVIDIA GeForce GTX 775M 2048 MB

  This is probably the cause of your problem:

  https://discussions.Apple.com/thread/6991142

  iMac graphics Update

• Firefox comes back to the top of the page when returning from a url why

  Hello

  When you use a search engine like google and by selecting a web site, when I use the left arrow to return to the results of my search for the web page is at the top of the list of the sites found not where I was down for.

  A slight but pain can it be set to return to the initial position of the page?

  Thank you

  Arnak

  Why not open each search result in a new tab and close each tab when you are done with it, instead of going forward and back in the same tab? The original search page will not need to reload each time you return.

• Query regarding different refreshing data from the grid when returned from a workflow

  Hi Experts,

  JDEV version is: 11.1.1.5

  Our application uses dynamic tabs the user interface shell.

  Whenever the user connects, it is taken in A TAB.

  Since the TAB A, the user navigates to TAB B.

  TAB B has a GRID B(table with a few records).

  Column A on TAB B has a hyperlink which, once clicked on will open a stream of different tasks in a different tab.

  Click on the column of hyperlink for the different lines will open different tf (under certain conditions).

  By clicking on the hyperlink, that the method _launchActivity(String title, String taskflowId, boolean newTab) is used, which the TF open in a new tab.

  The user works on the TF (in a new tab) which opened on click of a hyperlink in the column is and click on SAVE.

  Click to save some operation and removeCurrentTab method is called which will close the current tab, and control passes to the first tab (TAB A).

  The problem:

  Once the user tries to click or to return to the TAB B the WHAT GRID B is never updated that we cannot get the descriptor to refresh the data in the grid.

  Any suggestions would be much appreciated.

  Thank you

  Jean Claude

  huh, I thought it was another library in question.

  In all cases, you can use contextual event (when you close the current tab).

  The second option is to navigate to the method executeQuery by code call activities:

  https://blogs.Oracle.com/jdevotnharvest/entry/how-to_navigate_in_bounded_task_flows

• Restart the video when returning to a page

  I am looking for a solution to this problem too.

  The first page of my article has an AutoPlay video (with audio), when hit to swipe on page 2 of the article the video still playing on page 1.

  Having a short fake video autoplay on page 2 to stop the video on page 1 of the game seems to work, but striking swipe back to page 1 does not the video autoplay once again as it should.

  I tried adding the video in an mso to try to begin automatic playback, but not luck.

  Is there an answer to this?

  That's how work DPS overlays. You won't see the video AutoPlay again in the article unless you go to the next article or at least a two-page vertically on the page.

  Neil

• Skip the password when returning from sleep

  I'm really embarrassed to ask this question again.

  Shorlly after that I first set up my mini ipad4 I did something that allowed me to go to the lock screen directly without having to give a password every time the Ipad is awake or started cold...  For the life of me I don't remember how I did it I can't find the "how to" instructions, I found on the web somewhere.  I need this because I just do a restore to Icloud and the device wants a password to access the lock screen every time.

  Could someone please refresh my memory so that I don't have to type in the access code?

  Thank you very much.

  Do you mean open the iPad and get to the home screen of the iPad without having to enter a password? If you do then settings > password > (enter password) > disable password

• Vista update: he couldn't stop to restart the computer. Help!

  Once more Windows Update restarted the computer, loss of data and working hours.  It is true that this cannot be avoided?  He took over & could not be stopped.

  I was just finishing a long process of renaming & move files on a DVD burning program, when I saw the Windows Update window that displays a countdown to restart.  There are 2 options: (1) restart now & see (2).  But the option to "Defer" is grayed out.  Nothing could be done.

  I saw the site of Windows Update program may restart the computer when the computer has not been used for some time - but the computer has been used nonstop.  The window on the reboot warning do not appear & was rather hidden under ROM burning software

  Any suggestions?  Will be Microsoft to solve this?

  It is not Microsoft.
  These are public Forums.

  Change the way you receive updates:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista

  Vista offers four different methods for how Windows Update updates your computer. Below, we explain each method and when this is the recommended setting.

  Install updates automatically (recommended) - if you select this option, then all the critical updates will be automatically downloaded and installed on your computer. These updates will install at the time, you specify the fields to install new updates. This is the recommended option for the majority of people because it ensures that you have all the critical updates installed automatically on your computer.

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  Never search for updates (not recommended) - if you select this option, Vista never automatically checks updates. This option should never be selected as it puts your computer are likely to be affected, infected or hacked.

  Choose one of the following Options:

  Download updates but let me choose whether to install them

  Look for updates but let me choose whether to download and install them

  Read the news and see which you prefer to use.

  See you soon.
  Mick Murphy - Microsoft partner

• My printer will only print one page, then I have to restart the computer to print another

  The printer was fine since purchase, but recently, it will print a page after be on, then if I try to print a different document, he goes as far as the document taking up and looks like it's ready to print, then stops.  I tried to cancel the print job, but he will not - delete it then repeat "delete" in the print queue (but never removes it).  UN-plugging the printer is not clearly the print job.  The only way I can get to print the next thing is completely restart my computer.

  I tried to uninstall and reinstall the printer.  I put on all the latest updates for the printer... I am at a loss :(

  Does anyone have a suggestion?

  In the latest batch of updates to Windows, Microsoft has installed Internet Explorer 11. IE11 caused printer problems.

  Open Internet Explorer, click on help, then click about words of Internet Explorer. It should show the version here. If you IE11, then go to control panel, Windows Update, updates installed, look for Internet Explorer 11. Click Internet Explorer 11, uninstall.

  Restart the computer when you are prompted. Then see if your printer works.

  Rick

• Switches to color when you restart the computer profile or wakes from sleep

  I bought a Dell Inspiron 1470 with Windows 7 at home as a backup of my MacBook Pro.  I used the Spyder2Express to calibrate my screen that works well.  After that I restarted my PC the color profile has been enabled for a few short seconds, but then returned to the default setting, which is horribly blue and too bright.

  I then removed the color profile created by my Spyder2Express and used Windows' built in the calibration of the monitor.  Yet once, it worked until I rebooted the computer, or he woke from sleep mode.

  I then wen to the control panel-->--> the color management advanced and assured the new profile is the default value of the system.  The problem still remained after the computer is restarted.

  The only solution I have found so far is if after I restarted my pc I go to Panel of--> of color management and select and clear the checkbox "use my settings for this device."  My profile will then return until I restart the next time.

  As a pro photographer, it is a question that is extremely disappointing.  I searched forums, web, called Dell directly and none of this was of no help.  Any thoughts?

  Hi Mike,.

  It seems that software Spyder2Express adds color profile after each reboot. We can check if really Spyder2Express is the origin of the problem
  
  Method 1:
  Uninstall Spyder 2 express and check if the return of the issue after each reboot.
  
  Method 2:
  Configure the computer to boot and then refine the boot entry that is causing the problem
  
  Step 1: Perform a clean boot:
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  d. under the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  e. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  f. click OK and then click on restart.

  Step 2: Enable half the services
  
  a. click on the Services tab and then click to select the skin all the Microsoft services checkbox.
  b. Click to select half of the check boxes in the Service list.
  c. click OK and then click on restart.
   
  Solve the problem:
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual:
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  All the steps above to perform the clean boot is mentioned in the following article
  http://support.Microsoft.com/kb/929135

  Hope this helps,
  A Mir.

• AOL restart my computer when I log off the coast. It started to happen after I downloaded 16 updates from Microsoft about 3 days ago.

  When I connect to AOL my Windows XP automatically restarts. The strange thing is that this isn't it every time, but most of the time.

  Hi bill1106,

  1. not the problem only occurs when signing off the coast of AOL?

  2. you receive an error message?

  3. when all the updates is correctly installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to see the cause of the issue and after return with details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• Media Player when I click on a vidio clip it goes full screen, the cursor will therefore not then go back to the beginning to have to restart the computer

  When I clip media player goes full-screen cursor disapeers that I then have to restart the pc to return

  Hi KenHannam,

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the windows media player settings Troubleshooter.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756