HP Photosmart 7280 C: Jam printer when printing from InDesign

Similar Questions

• HP Photosmart 7525: Unable to print from iPhone 5 since the evolution of routers

  iPhone 5

  Printer HP Photosmart 7525

  We bought a new router and when it was installed, I cannot print from my iPhone 5. My phone is set up on the new WiFi router. I guess the signal to the printer is going through the router. I don't really know.

  I need help to know how to enable printing from my iPhone.

  Hello

  AirPrint is based on Hello (multicast), which should be supported by your router.

  Some routers does not support such an and some may need to change the settings of the multicast router work.

  Please let me know your router brand and model to understant better capabilities.

  So, you can try the HP ePrint app and check if that can allow the addition of the printer by its IP address.

  Click on the plus sign while choosing a printer and type its IP address, which can be found by clicking Setup > network > network display the summary on the front of the printer:

  http://support.HP.com/us-en/document/c01616126

  Kind regards

  Shlomi

• Photosmart c309g-m: cannot print from computer

  I signed up for e connect without realizing my photosmart c309g-m had to be able to access the internet, which he did not. Now my computer re-will not install my c309g-m. I now have no way to print from my desktop. I need help to re - install my c309g-m.

  Hello @botrock2227,

  Welcome to the Forums of HP Support!

  I would like to help you today with the relocation of your HP Photosmart Premium of C309g all-in-One printer on your Windows Vista-based computer. Can I please you follow the steps below.

  Please disconnect the USB cable from your printer or computer, is easier.

  Step 1: Uninstall the drivers:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure all traces of your printer is uninstalled from your computer before install us a new copy of your Photosmart.

  1. Click on the Start menu
  2. Select all programs
  3. Select the HP folder
  4. Select your Camera HP Photosmart
  5. Select Uninstall

  Please follow the instructions on the screen to complete the uninstallation. Once your HP Photosmart camera has been uninstalled, proceed to the next step.

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall the device:

  1. Please click here to download the package full feature software and driver for your printer
  2. Once the site opens click on the download button
  3. Once the download is complete, you can get a command prompt to run the installation program. If you see this, select run
  4. An extraction will occur automatically and your installation will launch
  5. Please follow the steps on the screen to reinstall your printer
  6. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once installation is complete, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• New HP Photosmart 7520 won't print from the photo tray

  EDIT: He will feed from the phototray if I print the photo in Windows Photo Viewer.  However, he still refuses to print directly from the jpg format, even if I specify explicitly in all the settings I want to print a 4 x 6 from the photo tray.

  Is this a normal behavior?

  I guess it would print correctly from other photo editing and look at software, but haven't checked that yet is not sure.

  PREVIOUS POST:

  I just got this printer and cannot print from the photo tray.  He printed from the phototray during installation and configuration, but it was the only time.  The rest of the time, when I try to print a photo, it selects only in the regular paper tray.

  Is there a magical procedure involved?  I have an operating system of Windows 7 and just installed on the HP site.  I uninstalled and reinstalled, but it still does not work.

  I load a sheet in the phototray, make sure that the correct printer is defined, select the paper size (in this case 4x6in photo sample provided with the printer paper), select HP Everyday Photo Paper, glossy paper, click on print and the printer does not take into account the phototray and prints from the regular paper tray.

  I've scoured the web and answers do not solve the problem.  It's very frustrating.  If I can't get this resolved in a day or two, I will back this printer and will try another brand.

  

  

  These settings should always print to the Photo tray.

• Photosmart premium will not print from the main tray

  I have a HP Photosmart Premium.  It won't print or copy from the main tray.  Despite the fact that I specifically designated main tray settings, he continues to try to print from the photo tray. How can I fix it?

  My recommendation would be to define the default values for what you do most often.  You can assign the parameter of the bins to automatic and the printer should draw the correct tray based on the other parameters of size and type of media.  If you experience problems with the automatic selection of tray for a particular document or a picture, you can specify the drawer wished for this print job.

  I'm a link the User Guide for your printer.  Click here  I thought you might find useful.

• Photosmart C7280 - Double-sided printing from Office 2011.

  I just switched to a MacBook Pro, Mac OS 10.8.2, running and have installed Office 2011. While I can print double-sided of my web browser and when printing PDF files, there is no option to print double-sided when direct printing from Word. Can advise you. Thank you

  Hello

  Follow the steps below to print a two-sided from Word:

  The Word open the print dialog box, open the Copies & Pages menu and select layout.
  Set the duplex as the type of connection required

  You can save the settings for later use by clicking preset > save current settings as preset.

  Shlomi

• HP photosmart 4480 don't print from my laptop

  I am not able to print from a laptop, but the other laptop prints very well. All I get is "error - printing" message. It has never printed on this computer. I use Windows Vista Home Premium Service Pack 2 on a Dell XPS.

  Hello elkaydub,

  Welcome to the Forums of HP Support! I see that you have not been able to print from your computer on Windows Vista on your HP Photosmart C4480, you get a "error - printing" message.

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you run the PSDR and still can not print, please continue here: print jobs are stuck in the print queue

  I'll watch for your reply.

  Thank you

• HP Photosmart B209 more: cannot print from web sites

  I used to be able to any function that I wanted to do on my old computer or my printer was originally installed on.  Since having to change my computer, I can no longer print directly from a web site, or my Windows Live email which is installed on the computer.  Whenever I want to print something, it must be registered on the computer and then printed from there.  Is there a solution to this problem?  Should I uninstall the printer and then reinstall the printer to the computer or?

  Thank you

  Dave Joy

  Hey @dajoy,

  Welcome to the Forums of HP Support!

  I understand that since the installation of your HP Photosmart Plus all-in-One B209a printer on your Windows 7 computer, you have not been able to print from any Web site or your Windows Live email. I would like to help you to solve this problem today.

  Now, to begin, I would like you to run the HP print and scan of the doctor tool. This tool will run on your computer and the "difficulty of printing" questions for you. If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Please click here to download and run the HP print and the tool of analysis of the doctor.

  If printing HP and doctor analytical tool run and turns out no problem, that there is most likely a problem with the Web browser you are using.

  Should HP printing and analysis tool of the doctor to run and problems, please test print again to check if you site Web printing problem has been resolved.

  Please reply to this message with the result of HP print and Scan doctor. The question should arise again as you please respond to this post with the Web browser you use (Internet Explorer, Mozilla Firefox, Google Chrome). I look forward to hear from you!

• Print quality poor on the logos of the bitmap when printing from InDesign

  We have a Mac studio. One of them prints this indesign document well, the quality of bitmap images appears as it does on the screen.

  On all other Macs on the same printer, print the logos of the bitmap on the same document with a really poor quality.

  Any ideas? It drives me crazy that have checked the settings of the printer, and it seems that they match the Mac to work.

  Don't think it's a thing of driver as anything other than the bitmap to print logos and all other documents very well.

  In the print options, you should also go to the poriton of "Graphics".

  Make sure it is not set to the Proxy - make sure it is set to "Subsample Optimisied" or "All".

• Export PDF printing from InDesign CS5

  Until last week, when exporting an InDesign CS5 document in PDF format, it was a choice of Print or Interactive. Now, there is no other choice and it assumes that the PDF is Interactive and gives to think I have change the color mode to my RGB document, which I won't do. Help!

  If the PDF (Print) option is missing file type form the drop-down list in the dialog box, see 101 troubleshooting: replace, or 'trash' preferences

• Print from InDesign prints fine, but print after that exporting to PDF prints black as gray, low Image quality

  Hi all

  I have a printing problem going on with a document that I am currently trying to print.  When you export to PDF (high quality print or press quality setting, as well as to any possible color output) and then print, black my document go to the gray and the images look washed out.  This does not happen if I print directly from InDesign on my printer.  I tried to change the merger of transparent space, change the color profiles document and corresponding to export options to the options used when you print directly from ID, all without success. the document is always printed wrong when exporting to PDF first.  Any ideas why this might happen when exporting or printing to PDF, but not when you print directly from ID?  Thanks in advance for any help!

  I see.  Is there a way to ID artificially add CMY export in the same way as it does when sending to print?

  Is the destination of the document a composite digital printer or an offset press? If it is composite set your black preference for export fills and convert to RGB on export:

  

  

  In Acrobat, the two blacks will be 0. 0 | 0 RGB and will display the same

  

• Printing from InDesign for Epson Stylus Photo R3000

  In InDesign CS4 when I go to print to my new Epson Stylus Photo R3000, I don't see any options necessary to select types of paper, color or black, IPR, etc. in the printing establishment of Project dialog Panel.

  However, when I use Quark I see all the options I need. Surely InDesign should have them too?

  Please can someone hepl?

  Thank you very much.

  Oh, re-read your messages earlier, you say:

  Dialog box comes under 'General' at the top by "Printer" the only option that he has 'Epson Stylus Photo R3000' which is the printer I have.

  and then separately:

  Yes, but if you hit 'printer' in InDesign all you get is a dialog box saying use of InDesign print dialog box to "avoid conflicts of impression. Then you are taken back to square one where you cannot select the printer determine color and therefore cannot choose the types of paper etc.

  Are you saying when you hit a printer you get this? :

  

  If Yes, then you have to hit the triangle I circled in green, to get to this:

  

  And you should get a whole lot of choice in the drop-down list of oval-surrounded. Some may be specific to a printer, and some cannot.

  Is not what you get? If this isn't the case, maybe you should post a screenshot.

  I'm not really convinced that the choice of the color in the InDesign print area management has much to do with what you want to accomplish. Certainly, it should not influence selection paper. for example.

• HP Photosmart C4780 won't print from my wireless laptop.

  I have a Photosmart C4780 who don't print to my HP laptop.  I have a Cisco Linkys router connected to a modem Rogers.  My laptop shows an error in the printer.  Can you please help me.

  Oh, you must keep the firewall on the installation.  The installation software configures the firewall for your installation.

  I reinstall the printer with the active firewall.  Go to control panel > printers & devices and delete the printer.  Then click Start > all programs > Hewlett-Packard > C4700 series and 'add a device '.  All this with your firewall active.

• Blurry images when printing from indesign

  problems with only a few images in an indesign document. all images are placed and the original files are perfectly crispy pdfs... tried to change the display but performance always appearing and feeling fuzzy? When I click f8 on the image it doesn't show any IPP to all course if it means something?

  Help, please!

  Thank you, chrissy

  It could also have something to do with the fact that I have to swap computers to print the file - I'll take all the links with me and those that are appear blurry to see if that helps reissue of links

  Bingo.

• Photosmart HP 7520: photo printing from the phone to the printer using eprint

  I managed to install my new Setup / printer eprint services.  Everything works fine so far.

  However, I sent a photo from my iPhone to the printer and it printed on ordinary paper, photo paper No.

  Is there anyway to say ePrint to print a photo, or am I doomed to do on paper?

  Please advise,

  Thank you

  Billy

  Hello

  Are you happy now?

  Have a good weekend.