print to iPad via Office pro 8500 wireless

Hi my Office pro works fine with my macbook. But when I try my ipad I geta message only no airprint printer found. How can I get my 8500 to be an airprint printer? All operating systems are up to date. Thank you

Hello

I'm afraid that the HP Officejet Pro 8500 Wireless (A909g) does not support the Airprint feature, as you can find below:

http://support.HP.com/us-en/document/c02814760

However, you can still print from your iPad using the HP ePrint home & Biz app:

http://support.HP.com/us-en/document/c02775166

Kind regards

Shlomi

Tags: HP Printers

Similar Questions

  • Office Pro 8500 A910: settings is more standard for printing double-sided on Office Pro 8500 A910?

    We always used standaard duplex until a few months after a update for the HP printer, now he can't keep remembering settings. I need to reset duplex printing before each printing. Very annoying. You can find it under: Preferences/options tab system/then the check mark to: printing to HP accessories.

    Each print, I have set the printer for duplex printing. Is there another way? I've got MAC iOS 10.10.  Greetings, Pauline

    Hello @Jamieson,
    First of all, I want to thank you for your answer!
    I will try to follow your advice, step by step. : happy smiley:
    Reset the power supply. Did not work.
    Updates work automatically.
    Gel and setting up the printer, did not work.
    Only the utility disc repair disk permissions feature, I don't understand, sorry, not an expert...
    But still I can print double-sided of my i-Phone in i - Pad! It's so weird. I'll ask my partner: wink smiley:
    So I hope you know any sort well!

  • I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the

    I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?

    Best report:

    Without thread - OK

    Functions without wire - OK

    Network name (SSID) has been found - OK

    Security - OK

    Print settings are OK with the settings of the router - OK

    Unfiltered - NOT OKand then it stops!

    Connection - do not run.

    Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.

  • Officejet pro 8500 wireless print envelope

    2750 old boy had a slot "envelope" in the output tray to make unique envelopes.  Which was very convenient.  My brand new 8500 had no such "slot" and it seems that I have to remove all of the paper in the tray to put one envelope in!  That makes sense to me, but I'm not just any housing "simple envelope" anywhere!  Is it possible to print one envelope with the officejet pro 8500 wireless without having to use the tray itself?

    Thank you

    DrBillS

    I HAVE THE ANSWER THAT WE ALL NOW!

    If you're like me: I am running Windows 7, using Microsoft Word 2007, and you have the Officejet Pro 8500.

    I just spent the last hour on the phone with a customer service very friendly Rep who tried to help me to print without margins on an envelope. I have try on mail merge and include a return address printed in the upper left corner and a printed stamp sorted in the right corner. Whenever I want to print it would create a margin on the left and right side.

    She thought at first it was a software problem with Microsoft Word 2007, because in his version of Word 2003, she could print borderlessly. But I then created an envelope in Photoshop and tried printing without margins. Once more, it would create a margin on the left and the right that was a little more "5/8 of an inch. In fact, the exact margin size is 0,6875 ".

    Anyone else having the same problem? I'm sure you are.

    HERE'S WHAT YOU SHOULD DO IF YOU WANT TO PRINT WITHOUT MARGINS ON AN ENVELOPE:

    (1) choose a new document in Word 2007, then choose Virgin doc 'LETTER' (no envelope)

    (2) a set of left margin: 0,1875 (Yes it's small!)

    (3) a set of right margin: 1.5

    (4) set the top margin: 2.1875

    (5) also set the bottom margin: 2.1875

    (6) turn the grid if you see your work area.

    The grid can be enabled in the 'View' menu and then select the gridlines check box. If you hold down the 'alt' key, you can move objects (such as text boxes) without having to align them on the grid.

    Create your envelope, then print. Essentially what you are fooling your printer to think you are printing on a letter for an envelope printing in reality. I need to print 1000 at a time, so it was do-or-die because I just bought this printer and love the speed at which it prints in color. especially on the functionality of the project.

    Good luck!

  • OfficeJet Pro 8500 Wireless: Hard reset after automatically adjustments between each printed page?

    I have a HP Officejet Pro 8500 Wireless, mainly connected with WiFi for PC Win7.

    The problem is that the printer automatically adjusts between each printed page! How can I fix it? Is this possible with a hard reset?

    Thank you for your answer!

    I think that the cable of the red ink has been blocked, but it's fixed now.

  • OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

    Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

    Hello dhe8011,

    Welcome to the HP Forums!

    I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

    Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

    Let me know if this document solved your problem or not.

    Impatience on your part.

  • Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

    I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

    What happens and how can I solve this problem?

    Hi TM1997,

    Thanks for the reply!

    Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

    Have a great weekend!

  • OfficeJet Pro 8500 WIreless. Change print heads

    try to change the officejet pro 8500 wireless print heads.  Can't find existing print heads.  Press on * does not.  Have turned machine off and restarted the procedure - once again I can't locate heads.  My machine seems to have located differently than in the manual or video print heads.  Help, please

    miles1938,

    With the Officejet Pro 8500 Wireless ink cartridges are in the lower left front of the printer compartment.  We can access transportation, which maintains the print heads by lifting the scanner from the front, not just the scanner cover.  To move the cart and the print heads to the left so that we can access it, press and hold * key for about 6 seconds.  If the transport is not moving then we can try to move manually.  Click here for references.

  • Office jet pro 8500 wireless/updated A910g

    Can I change to A910g A909g on my jet pro 8500 Wireless Office?

    No,

    HP Officejet Pro 8500 (A910) a is a completely different model than the model of 8500 Wireless (A909).

  • Failed to get printer email address on Officejet Pro 8500 a A910a

    Hi HP Support!

    I would like to know how I can get the e-mail address of my printer? My printer model is HP Officejet Pro 8500 A910a. Here's my current installation of the printer:

    1. I've already updated its firmware to include the eprint service.
    2. My printer is already connected to the internet via the wireless network connection.
    3. I am able to print documents using the wireless printing functionality.

    Everything is already OK, except that I can't use the print feature Email Address. Whenever I click the button, it says 'the printer could not connect to the server' (note that I have already activated my Web Services printer). He also says that I need a parameter to connect to the printer of proxy server.

    That's my problem. I already looked for my proxy and there is none. I tried to watch using my Firefox browser and the browser I.E via internet options. I even googled 'what is my proxy setting' and the result says 'no proxy server detected' just my IP address.

    Please help me with this. Thank you!

    Hello

    The steps below a usually resolve the problem you are experiencing:

    1. unplug the power cord at the back of the printer.

    2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

    3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

    4. wait for 30 seconds, then plug the printer back and power.

    5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

    These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

    1. tap the wireless at the top of the screen of the printer and note the IP address.
     
    2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
     
    3. the printer status page must be open.  Click network in the upper part.
     
    4. click on networking on the left.
     
    5. Select the Proxy settings.
    Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
    If you receive an internal system error, refresh the page until it loads the proxy settings.
     
    6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
     
    7. click on the network address (IP) on the left.
    Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
     
    8. leave automatic IP IP address Configuration.
     
    9 change the DNS address to the manual DNS Server Configuration.
     
    10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
     
    11. click Apply and you should get a success message.
     
    12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  • HP officejet PRO 8500 wireless

    I work with 2 PC over Wifi with the HP officejet PRO 8500 wireless printer she even in Wifi.
    Most of the time everything works fine but sometimes the printer does not print a document. MICROSOFT OFFICE (Outlook or Word) so that the latter is visible in the spooler... If I cancel it in the list of the spooler does not remove the document from the list and the blocked documents remain behind. It doesn't happen that one of the 2 PC.

    If I go into the printer properties - solve problems - utility can see that a document blocks other and announces that the problem is solved.
    Unfortunately the problem is always there. Restart the PC or printer do not change.
    It has been several times this has happened. I have not yet figured out why and how I get out of this deadlock state... Thank you for your help. !

    Hello

    See this page to select your language:

    http://support.Microsoft.com/common/international.aspx

    ====================================

    Or sorry that it is area English.

    On the top of this page of answers (English) v -click and set your language.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • OfficeJet Pro 8500 Wireless - pop-up window does not disappear

    To start the computer, a window pop up keeps saying "Please wait while Windows configures Document Viewer.

    Then he said: "Insert the Document Viewer disk error 1706 no valid source could be found for the viewer of documents produced."

    I am connected wirelessly with a Hp Officejet Pro 8500 wireless printer... And it prints, but message pops up everytime I open computer, or open HP solution Center.

    Running on Windows XP. -

    Any help would be kindly appreciated - as this pop-up message won't go away.

    I was hoping that the simplest method would work first.  I studied this carefully for you that I am aware that the missing files in your registry can cause this but I can't tell if this is directly related to the HP Solution Center or XP computer.  You are able to open the solution Center?  If so, then I do not recommend remove and reinstall the printer immediately if it is scanning and printing correctly.

    Microsoft Forums gives a very long list of troubleshooting steps, but the reason it is suggesting that a clean boot is to make past the error.  I don't think it will fix actually.

    This document entitled "Error 1706 - What Is It' had the same information I was looking for.  In the end, he recommends the purchase of a software computer cleaning, but if you read this document that tells where to find this missing file you and you can not find, I recommend the simplest method first which works simply on your XP Disk Cleanup (Start button > all programs > Accessories > system tools > disk cleanup) and restart the PC.  I really want to try to save the greater amount of time, and keep it as simple as possible.  Here is an example of the magnitude that it can get however.

    Let me know if any of the simple methods do not work, and I'll give you the best recommendations on registry cleaning software.

  • HP Office Pro 8500 first and Mac OS Lion. Software problem

    I have a HP Office Pro 8500 first and recently, I upgraded my Mac OS Lion. Now the printer is not recognized by my Mac OS Lion. I understand there are required HP upgrade. Please notify.

    We will restore the printing system

    -Sys Prefs, print Fa
    -Right (control) click inside the box that lists your printers and select Reset Printing System
    WARNING - This will remove ALL your printers
    -Select the sign + to add again. Search for the printer, select it, and wait for the theAd element button becomes available. Click it

  • Driver Windows 8 all-in-one Officejet Pro 8500 Wireless does not

    Hello!

    I recently got a new Dell Inspiron computer running the 64-bit version of Windows 8, and I have an Officejet Pro 8500 Wireless all-in-One Printer from a long time ago. I don't have the driver disk version, since I bought the printer until Windows 8 is out, so I tried to download it from the HP website. Whenever I try to run it, however, it is said that it is the extraction, but once gets it is over, nothing happens. The Installation Wizard is not pop up, and there is no error message explaing it. Help please?

    Thank you!

    wsquared123 wrote:

    I have a Dell Inspiron 15 3000 with a 4th generation intel core i3 processor

    How the printer is connected to your PC? USB or network

    HP all-in-One Printer Remote App for Windows 8.1 printer is located if it is connected.

    and HP and Capture app scanning allows you to scan with compatible devices.

    I hope this helps

  • HP officejet Pro 8500 wireless device

    Print, and dsplay collapsed printer says to remove paper jam.  Impossible to find the jamed paper after opening any reversal printer, remove the document feeder, removing duplex 2 siding on the back track.  I just don't see or find any paper.

    Following support HP Officejet Pro 8500 wireless treat that treat the paper jam error message.  Note that it says 'paper jams can be true or false. The product can report a paper jam, even when there is no paper jam. The following steps apply to both true and false paper jam. »

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01617494&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3752459

Maybe you are looking for

  • I lost the mail since the update files to el capitan.  they simply disappeared!

    I lost the file in "icloud 'mail since update to El Capitan.  They simply disappeared! And all my emails in these folders are not FOUND!

  • ERROR IDE resolved #1

    Hello! Any person having the error IDE #1 is bios associated readers. Toshiba towers use high say Cable Select instead of low, as it is in the standard IDE/ATAPI, to detect the CD-ROM drive at startup. If you change the drive that is not an original

  • What is the meaning of the letter 'R' in the signal bars?

    can someone help me? Please, I really want to know the meaning of the R near the signal bars? R stands for what to do? I am using LENOVO A680

  • HP ScanJet drivers

    I am trying to find a driver for my ScanJet G-4010, that will be updated for use with Windows OS 8.1.  The aide said Assistant available, but I'm unable to find and install an update.  Anyone have any ideas?

  • Completely dead blackBerry Torch 9860 smartphones

    Hello I just got a Torch 9860. To connect to our corporate network, I was advised to remove the battery and re-insert it to force a hard reset. After that, he seems to have made the device completely unusable. It does not meet the power button, no li