HP Office Pro 8500 first and Mac OS Lion. Software problem

Similar Questions

• ISO Driver and software for the HP Officejet Pro 8500 compatible with MAC OS Lion a

  Just got this printer and now my macbook brand new don't jive. Can't seem to locate an updated driver to resolve the problem. Can't wait to get this printer. The mac OS has been out for some time too

  Help HP

  Hello

  Make sure that the printer is connected to your Mac, USB or via the network.

  Download and install the full feature software below:

  Be sure to select the Software from HP recommended during installation.

  http://FTP.HP.com/pub/softlib/software12/COL40169/bi-97933-1/HP_Lion_Ink_SW_v12.13.22.dmg

  Please let me know any progress,

  Shlomi

• I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the

  I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?

  Best report:

  Without thread - OK

  Functions without wire - OK

  Network name (SSID) has been found - OK

  Security - OK

  Print settings are OK with the settings of the router - OK

  Unfiltered - NOT OKand then it stops!

  Connection - do not run.

  Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.

• HP OfficeJet Pro 8500 first print and mirror for treadmill mouse and t shirt

  HP OfficeJet Pro 8500 first concerns.  I tried to figure out where the printer setting is for printing in mirror.  It is usually in the Advanced Settings tab.  I called HP and was told by 2 different tech, then supervisor that HP does not include this option in this printer.  I tried to explain how I felt it was hard to believe and I was told that it is most likely was an option that was no longer necessary.  I have his name and the file number.  I asked this bump up the level immediately above, because I felt strongly HP has not intentionaly left this option.  I digress.

  Can anyone suggest anything.

  Thank you

  Joe

  Thank you all

  Got it to work.

  990 has not worked, 5600 had mirror but does not print correctly.

  I went to the HP site and downloaded different drivers until I could get to work.

  Thanks again

  Joe

• HP Officejet Pro 8500 first: Feeder does not

  Hello:

  I use a HP Officejet Pro 8500 first all-in-one printer, and recently I started having problems with the document feeder. It always saves when a document is sitting there, but when I choose "Scan" it makes a really loud grinding noise, short and says that I need to reload the document, and then try again. I also noticed that the roller is demeaning not himself, he is already lowered when I place documents in now. I think that maybe that's the problem.

  I also have the error 'Pump motor Stall' when I restart the device.

  No idea how can I fix? I scan a large number of documents in the office and the document feeder is quite crucial for time management.

  Thank you!

  Hello @ddehner523and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your feed paper.  I would like to help!

  I recommend to remove printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would also turn on the power of the printer into a different wall outlet.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Jet office pro 8500 does not print Yellow - no error messages and printhead life shows good

  I have an Officejet Pro 8500 A909n Prime that doesn't print Yellow. I have replaced the yellow cartridge twice, cleaned the printheads as well regular and deep cleaning, and I cleaned the contacts on the print head. Current information shows the printhead as good quality. The amount of ink is correct. There has never been no error messages whatsoever. What gives?

  {The content removed}

  Sorry, but none of your suggestions helped. What I suspected at the outset was the printhead and it seems to be what needs to be replaced. HP and print heads are a big problem and I had this problem on previous models of the officejet family. My Canon has been in service for seven or eight years and I have never had a problem with it. I think that if I replace this printer that I might have to consider anything other than HP. Thanks a lot for your help.

• OfficeJet Pro 8500 first, working to the new router. Menu locked up now, wireless

  Printer is HP73053C (Office Jet Pro 8500 A909n first) converted from DSL to cable modem.  Now wireless cannot find printer and lost top buttons (Tools, ink level and help) features.  Windows 7 pro 64-bit.  HP support intervened during the WEB search and told me I was out of warranty for them to help me.  Reconnected printer on USB, reinstalled the drivers, (OJP8500VA909_Full_14.exe) thin printer on USB but still can not find way to unlock lock-up wireless.  Still no access tools, ink (try to get to the wireless configuration) or menus help, no answer on the softscreen buttons.

  Please, can anyone help?  Is it possible to perform a "hard reset" on the printer?

  OK, you can try a reset more mild # and 6 keys.

  If this does not work, can you get it to a stable State where you can load the firmware update?

• HP Officejet Pro 8500 a on Mac full install

  I have the HP OfficeJet Pro 8500 has more software installed on my HP Pavilion DV7 (wireless connection).  It works very well on all the features, including the scan and e-Print.

  I recently bought a MacBook Pro with OS X 10.9.2 Maverick.  If found the HP printer without my nothing to do and I can print from it without any problem.

  I want to install the update of the driver to make it me scan to it for the Mac.  However when I look on the net, everything seems to be able to find is the update for the e-print, I have already installed.

  Can anyone help?

  Hi there obxperson99,

  I read your discussions and messages on your concern with the digitization of the Mavericks.

  Even if you have been informed that no full functionality driver and the software is available for your 8500 has more and 10.9, there may be a work around options for you can scan. See the link below for details.

  How to perform a scan: OS X v10.9 - click on "Scan without HP software" and you will see 3 methods to choose from.

  I hope this helps!

• Yosemite and hp pro 8500 910 and envy 4500

  I plan to update on the new Mac os 10.10 Yosemite.   Will be my Officejet pro 8500 910 a and printer Envy 4500 AIO units on this bone function?   Drivers and software for this operating system is not on pages with HP support.

  Everything works fine with Yosemiti on the 8500 officejet pro and the envy of 4500.  I had no problem without either wireless or wired in either print or digital projects.

• No computer detected in scan only Mode. OfficeJet Pro 8500 a. MAC OS10.9

  My 8500 does not detect my computer in scan mode.  Printer and computer are on the network.  I can print from my computer.

  Instructions for a "connection error" or "Computer no. detected" Error Message is displayed during the scan only go up to 10.8 and when following the directions for open print Queue and the window opens but with no settings of the printer.

  Re: Officejet Pro 8500 has MAC OS10.7 any computer not detected in scan only mode

• OfficeJet Pro 8500 first wired referee

  I have a first OfficeJet Pro 8500 all-in-in-one installed on a home network. It is wired ethernet to a Linksys router. I have two computers on the network - a running XP and a Windows 7. Solution Center works very well from the XP computer. On the Windows 7 computer, I just downloaded and installed the latest version of the software from the HP website. I can print to it and he ping the computer 7, but the center of Solution does not work. When I try to open the solution Center, I get the following error message: "HP Solution Center cannot work because your installation of the device is not complete." I have downloaded and run HP Print and Scan doctor, and we found no problem. I hope someone can help. Thank you.

  JP

  Hi jpilegg,

  The message indicates that the installation has failed to complete.

  Please download the uninstall utility and remove the whole driver using level 4.  There are instruction download page.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-98744-3&cc=US&DLC=en&LC=en&os=4063&Product=3752462&sw_lang=

• OfficeJet Pro 8500 first stopped scanning

  My Officejet Pro 8500 has stopped scanning.  The message window says it is not connected to the network.

  I changed my DSL provided by the local cable company to ATT U verse a few months ago, but the problem does not seem to be related to this change.  I say this because when I ran the diagnostics, the printed page says that my problem is "the wireless radio does not work. Contact HP support. »

  HP support offered advice tech for $29) warranty, or sell me a new all-in-one.

  The wireless radio can be fixed? Is it a software problem.  I have to buy a new all-in-one?

  Hello JessicaD,

  I see that you have a problem with the wireless radio fails on your Officejet 8500. To inform you in this regard, if the radio has failed, it is not a replaceable part by customer, but I'll try to help you with the problem.

  Start as a result of this document: printer does not maintain the wireless connection.
  With this document, I would like to track:
  (1) restore your default settings of network on the printer.
  Go to setup (can be a wrench), network, and then restore the default settings of the network. After that the power on the printer.

  (2) turn off the wireless radio.
  Go to Configuration > network > wireless radio, you must have the option to turn it off.

  (3) hard reset of the printer.
  While the printer power cable for 30 seconds, while the cable is unplugged, press and hold the power button for 15 seconds. It's draining the printer of all power. Reconnect the cable.

  (4) turn on the wireless radio and reconnect.
  Go to Configuration > network > wireless radio - on. Then, go to Configuration > network > wireless are running the configuration wizard.

  If it was not successful in entering you connected to the network and or print wireless. You still have another option with the printer to try before replacing.
  If you have an Ethernet cable, you can set a wired network connection. Plug the Ethernet (cat5 cable) cable into the printer and the router. It will be assigned the printer a new IP, which means that you will need to add the printer to the computer. This will still allow the printer on the network and communicate with a wireless device.

  Please try all above and I would like to know how everything goes. Thanks for posting on the HP Forums.

• print to iPad via Office pro 8500 wireless

  Hi my Office pro works fine with my macbook. But when I try my ipad I geta message only no airprint printer found. How can I get my 8500 to be an airprint printer? All operating systems are up to date. Thank you

  Hello

  I'm afraid that the HP Officejet Pro 8500 Wireless (A909g) does not support the Airprint feature, as you can find below:

  http://support.HP.com/us-en/document/c02814760

  However, you can still print from your iPad using the HP ePrint home & Biz app:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• HP Officejet Pro 8500 'unavailable' for Mac OS 10.7 installation software

  Try to set up this printer to MacBook via USB cable. Computer recognizes the printer and looking for appropriate software updates to install the printer. Several attempts have resulted in all "software is currently not available, contact the manufacturer. HP Web site is not useful. Any ideas? Thank you

  Download and install this: support.apple.com/kb/DL907

  Then, reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Premiere Pro CC 2014 and 2014 Media Encoder CC problem

  Hello

  Whenever I'm ready to export my project my first Pro CC 2014 stop answer all together. I tried the short cut (command + M) or through the bar Manu. the result is the same, first Pro CC 2014 just freezes and does not respond to what it is until I force quit and relaunch allover again. I tried exporting from Premiere Pro auto, without using the Media Encoder, but the problem remains the same.

  I use the new Mac Pro. I've heard talk of that adobe Premiere Pro has problems with the new Mac Pro. Is this true? Or another problem?

  Thank you and looking forward to hear from you again,

  Maruf

  He is a former post office that was found on an obscure forum. Please let us know if you still experience this issue.

  Kevin