Print via Wi - Fi from a Blackberry Handheld

Similar Questions

• Officejet J6480 carriage jams when printing wirelessly via the plugin from HP printing service

  I try to print on my printer OfficeJet J6480 HP all-in-one to my Samsung Galaxy Tab 3 tablet that runs Android 4.4 Wireless using the "HP Print Service Plugin on the tablet.

  Measures already taken;

  Sucessfully downloaded/installed the Service HP Print on shelf Plugin

  Radio wireless to the printer and correctly configured to communicate with the router wirelessly activated successfully.

  Problem:

  When you try to print something from the tablet to the wireless printer, the printer is trying to perform the print operation (flow paper in the printer from paper tray, shows 'Printing' on the printer screen), but then never made a real impression and gets a 'Transport Jam' indication on the printer screen.

  When this occurs above, I opened the hood top, checked for jammed paper in the paper path (Nothing), did tension of printer many times, cycle of fact alignments cleanings and cartridge many times, changed the paper to different types of paper.

  None of these actions corrected the problem...

  I'll also add that when you perform the steps of printing with the radio wireless on off the printer and the cable connected to the printer, the printer functions normally when you print from my pc applications - no traffic jams. Also, the printer works normally when you perform a function 'copy' locally from the printer control panel - not roadways of jams.

  I thought maybe an update of the firmware to the printer could solve this problem - ideas about this being a likely solution?

  BTW - how you normally clear / would correct a cart-jam regardless of printing wirelessly or through an ethernet cable?

  If the firmware update is not a solution, any comment on what could be the cause of the problem?

  If an update is available, could you tell me how to do the upgrade and where can I download it from?

  Thanks for all your comments... Denny

  E - rog,

  Two things I wanted to first of all thank you a lot for the response to my original message concerning the problem of printing wirelessly to my printer HP J6480 of the Tablet, Samsung Galaxy Tab 3 via the Plugin of Service HP Print.

  Secondly, I wanted to aplogize for the very long delay in responding to your... I had some health problems with a family member who prevented me to try your suggestions to the problem.

  I am pleased to report that I managed to solve the problem... I am now able to print to the printer of the tablet.

  A little history on the fix...

  I tried to download and install the update of the firmware from the link you provided, while having the printer connected to the PC (Windows) computer via a USB connection, as you suggest. (It was initially connected through my home network, so I had to first uninstall, then reinstall via USB connection). When you try to install the downloaded firmware it failed, even after several attempts to re-downloading/reinstalling.

  Instead, I uninstalled the printer again, reinstalled over the home network, downloaded the update of the firmware directly from the HP site by locating the printer model, then the firmware. This time the firmware successfully installed (was able to view the progress of installation of the firmware in the display on the front panel of the printer). Make the installation of the firmware with the printer installed on the network domestic (instead fo via USB), the installation process allowed me to search for the printer on the network - it found it successfully and successfully installed the firmware.

  After this successful firmware installation and turn on the wireless radio on the printer (via the button on the front panel), I was able to print successfully from the tablet... YES!

  Needless to say, there is no carriage jam messages as before... and I did not try your other suggestions to go to the HP article on carriage jam error States/solutions.

  I am really gratefull for your response/suggestions...fixing this problem did the usefulness of my tablet to increase dramatically to have the ability to print... cudos to you for your efforts on this forum and a big "thumbs up" for your records.

  Denny

• Is it possible to print from a BlackBerry to blackBerry smartphones?

  How to print an email or an email attachment directly from my BlackBerry? I would like to avoid going back to the same new message on my computer just for printing.

  There is no way currently to do.

  The Z30 a USB Host and print capabilities can be added in a future update.

• BlackBerry smartphones print from a BlackBerry smartphone: it is possible

  http://www.BerryReview.com/2009/01/20/review-PlanOn-Printstik-PS910-Bluetooth-BlackBerry-printer/

  Review: PLANon PrintStik PS910 Bluetooth printer BlackBerry
  January 20, 2009

  I quote:

  The PrintStik works as advertised and print wireless from your BlackBerry with ease! PlanOn did an admirable job of creating a functional and easy to use wireless printer.

  http://www.Blackberrycool.com/2009/03/print-from-your-BlackBerry-with-Cortado-basic-print/

  Print from your BlackBerry with Cortado basic Print
  Posted on March 3, 2009, 11:41 by Kyle (BlackBerry Cool)

  I quote:

  (...) The application supports almost all printers photo Bluetooth compatible (for example, Canon, HP and Polaroid) as well as simple text printers (if only text printing is required). (...)

• Cannot print via Epson WF-6590

  One of my users can't print continuously on our printer Epson WF-6590. The device is hard plugged into our network, the firmware is up to date and everyone in the office can print, except for a single user. It allows to print one or two times before either an error of communication or message filter has failed is displayed. It's a very intermittent problem, and more often than otherwise, this occurs when a host of jobs present one after the other.

  I have tried tons of troubleshooting steps. So far, include:

  resetting the printing system

  * Add the printer via the latest Epson PS driver

  adding the device by IP and Hello

  * permissions of the drive checked and repaired

  * updated with the latest OS (10.11.6)

  Any help would be greatly appreciated.

  Rob

  Have you tried to replace the network cable from the Mac of the router or whatever it is connected.

  Try it with a cable that you know works.

• I get "printer does not ' when I try to print via WiFi. Everything seems to be set up properly

  I went through setting up to print via WiFi.  When I try to print I get printer not responding do not.  When I boot I have a message "the printer is online."  I get a box showing that I am low on ink.  I can use the features of scanning from my laptop.  I can't print.

  I have a printer Canon MX882

  Lloyd

  Hi Lloyd,

  Thanks for posting this question in the Microsoft Community.

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. what security software is installed?

  3. don't you make changes to the computer before this problem?

  Follow these methods.

  Method 1.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Method 2.

  We can refer to this article and check if that helps.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Impossible to print via USB using my iMac running 10.6.8 Officejet 4635

  I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB.  I have an iMac running OS 10.6.8.  Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect/reconnect the power to disconnect/reconnect usb, delete and 'Add PRINTER' again, etc...) The computer does not recognize the printer, but displays "Unable to send print data" after I click on print.  I know that the printer works very well because I was able to send the document directly to his personal email address.   Help, please!

  Hello! Welcome to the @DanLA forums

  I have seen your post about how you can't use your Officejet 4635 with your iMac running 10.6.8. I understand that you have already tried troubleshooting, so please ignore all the steps that you have already tried in the list of my own suggestions below. If you still can not connect then, think of give us a call. I'll leave the details below.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your Mac
  4. Reinstall the complete driver: 4630 Officejet HP e-All-in-One Printer full feature software and drivers series
  5. Try another USB cable
  6. Look for an update of the Firmware: get the latest Firmware and updates
  7. Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good luck!

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• 1102w won't print via USB

  We have a 1102w currently used via USB.  It works perfectly with the macbook from my wife and my computer laptop windows 7.

  I have a macbook pro with the OSC v 10.9.5 and went through the routine to add printer, but when I print I can see that the document will print to the queue, the print queue empties but the printer does not print the document, the blue light flashes but no printing... any help in getting this problem would be greatly appreciated.

  Hi @richardskelt ,

  I see by your post that you can't print via a USB connection on the computer of 10.9, but you can print on the Macbook and the Windows 7 laptop. I will do my best to help you with this problem.

  Connect the printer directly to the Mac USB cable and run the updates Apple to install the printer.

  Verify that the correct driver for the printer name is listed.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (P1102w)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Test the printer.

  If you're still having problems, follow these steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click the Apple icon, and then click System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the + sign to add the driver, you may need to click the drop down menu to select the name of the printer, and then click the Add button.

  Test the printer again.

  If you need help, let me know.

  Good day!
  Thank you.

• Printing problems on a M1120n MFP printer via the network

  Hello

  I bought a printer HP M1120n MFP, a couple of months.  I made sure that there the firmware up-to-date and that you have downloaded the latest drivers from hp.com.

  I can print and scan very well from the PC which is connected to the printer via a USB cable.  However, I can not usually print on the network of the other PC.  On the PC, I can ping the printer and I can also see the printer status page if I enter the IP address in a web browser on the PC.  So, I'm sure that there are no network connectivity problems.

  However, when I print to the printer on the network of these PCs, jobs just to stay in the queue for the printer.  Sometimes they print - but I don't see any model when they print.

  I would appreciate any suggestion on what to do, because I have to return this printer unless I can solve the problem?

  Thank you

  Bogman

  Thanks HP for quality and urged him to respond.  This has really increased my opinion about your company and the excellent support it brings.

• Connection to a printer via Bluetooth

  Hey all,.

  Is it possible to connect any device bluetooth compatible printer via the BlackBerry and print? It doesn't have to be complete documents with images etc. Looking forward to all the advice.

  Kind regards

  Schalk

  Check this thread.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=12143&query.ID=46...

• OfficeJet HP 8600 N911a stopped printing via a wireless connection

  There are about 3-4 weeks our 8600 Pro Officejet stopped printing via wireless connection.  I tried to uninstall and reinstall the software on the site of andf also the HP CD.  I ran the software help HP and everytime it tells me to reinstall the software.

  The printer appears on the Wi - Fi and install it correctly every time.  I can print diagnostic pages, status reports to the printer from my computer without isse.

  Pages of test and all other documents will be not print.  He says that the printer is offline.

  I live in the country and there is no wireless connection close to home that he is recovering.

  Nothing has changed from what I can tell.  the unit is out of warranty now and to get help from HP, I would have to pay $40 to get telephone assistance.

  Is there someone out there who can help?

  Thank you.

  Try the steps in this post to restart the spooler: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-photosmart-premium-c310-printer-Windows-7-operating/m-p/1118873/highlight/true#M83583

• My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.

  My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.  I just get an error message when I go to the HP Eprint centre.  It prints the address email of the coverage, but nothing else.  The attachment is not sure that I can see.  I tried to send an attachment from my Mac and worked well.

  Thank you for your response and I am sorry for the delay to return to you.  I tried save the Pages document in a Word document and send it to the printer using ePrint but it is even.  That is to say the handout printed but not the attachment.  However, when we removed the accompanying document and sent the attachment in its own it has worked well for we have managed to solve the problem. Thank you very much.

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...

• HP Photosmart 7520 cannot print coupons or receipts from sites that I could always before

  I've always been able to print coupons or receipts from Web sites until a few days ago and now when I hit print control P or control/SHIFT/P I get a white screen with the site web/print info in the address at the top line.  Nothing happens.  When I check my devices to see "what is printing" my queue is listed.

  Hi there @BluedogMom

  I hope you are well!

  I understand you are having problems printing from certain sites, for your Photosmart 7520. I will do my best to help!

  Please all first try to open a different web browser, for example, if you use Firefox, try Google Chrome, visa versa.

  Try to print to the other browser and let me know what happens.

  Also let me know which operating system you are using: what is my operating system?

  Thank you