Print with a black border to show the 'edge' of the page?

Similar Questions

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• HP 6600: why can I not print with only black when I have only black cartridge in hp 6600 as hp 4500'?

  and he always says that color cartridges are leaking so I had to make one more only accepts black and I can not print with only black.

  How can I print with only black when I have the only black in the printer.

  Why only black does not work with the color cartridges.

  What is the error message you see with the color cartridges installed?

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. 5665 envy is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet Pro 8610.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 6600 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  If you do ever print color laser printer would probably be a better choice.  If you occasionally print color but especially black a HPI printer as those in the first category above can be a good choice.

• printing with a black background when it should be white. How can I change to white.

  I have a hp photosmart 5514 when I print an image that occupies half of the page the rest is black. where can I change this white background back so I'm not wasteing all this ink. Please give me instructions step by step because I'm a beginner with computers Luanna

  Thank you so much that worked.

• Mysterious black border (only) at the bottom of the first screen iPhone

  I have an iOS application that I wrote in 2011, and I'm trying to upgrade to the latest iOS and devices.  I have a thick black border at the bottom of the first screen of my request, for most combinations Device/Simulator and iOS. This is * not * a black border at the top and at the bottom of the screen problem, who has been treated exhaustively in the forums.

  There is only a single black border at the bottom of the screen. Also, the border is only broadcast on the first screen of my request, that has buttons to go to the rest of the application. Even if I navigate to the first screen of my request, somewhere inside the application, the border becomes visible. There is no black border in the other forms in the application, apart from the first screen.

  It is * not * seems to be a launch image problem. I have a picture of launch, [email protected], and the launch image works fine. Here are the setups I get or don't get the black border:

  iPhone 4S (iOS 9.2) Simulator - without black border

  iPhone 5 (iOS 9.2) simulator - black border

  iPhone 5 (iOS 8.1.3) device - without black border

  iPhone (iOS 9.2) 5s simulator - black border

  iPhone 5 s (iOS 9.1) peripheral border - black

  iPhone 6 sec more (iOS 9.2) Simulator - black border

  iPad 2 (iOS 9.2) Simulator - without black border

  iPad (iOS 9.2) air Simulator - no black border

  iPad 2 Air (iOS 9.2) Simulator - without black border

  Pro Simulator (iOS 9.2) iPad - thick black border all around the application window

  retina Simulator (iOS 9.2) iPad - without black border (at the bottom of the screen)

  I tried everything I could think of, but nothing seems to work.

  Hello sandpjain2,

  Everything you wrote in 2011 will likely be rewritten using the automatic formatting.

• Pavilion g6: black border appeared on the right side of the screen - the task bar disappeared downstairs - 1280 x 800 (recommended)

  My laptop recently hooked and I couldn't even do a ctrl/alt/delete to run the programme of work to see what was going on, so I turned off manually. At the start, I have a black border running down the right side of the page and can not see the taskbar at the bottom. I put in 1280 x 720 resolution to allow access to the bottom task bar. I updated the driver for the display, but this did not remedy the problem. How can I go back to 1280 x 800?

  FIXED! Last series of Microsoft updates have cured the problem. The resolution is now in 1366 x 768 (recommended)!

  I can't think I powered the phone turned off when microsoft have downloaded updates, too bad Microsoft doesn't inform you they do this and then freeze you :-(

• Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

  I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

  Hi marsha3236,

  To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

  If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

• Photosmart C4450 scanner prints with a black line on the right side

  The need to issue to resolve, the RPG scanner with a completely black spot on one side of the page.  When used as a printer everything is OK

  Thank you

  Seth

  * Have you tried to clean the surface of the glass on the printer to ensure there are no particles causing this black line?

  * So, have you tried a hard reset of the printer?  Unplug the unit while on, disconnect the other end of the power cord of the direct plug, wait 30 seconds and plug in the.

  Try to plug in his own taken dedicated as well, because the electrical noise from other products can cause these lines in the analyses.  Also, check the steps in the document is located here.

  Let me know how it goes.

• Export composition portrait in landscape orientation with a black border on the sides.

  I did a portrait of 1080x1920px H.264 video for a year or two and I have not had problems exporting to an mp4. I modified the file even over and over again, and I fear that in doing so, I messed up the whole thing.

  Recently, the final product, after export, is a rectangle with huge black borders. As if trying to export the file to Adobe Media Encoder CC 2015, he decided to change the file of 1920x1080px - compression to the tune of the original composition.

  Is it possible that I can fix this or will it go back to an old backup? I've changed a lot since this time I would probably just start all over again.

  Thank you for reading.

  1080 x 1920 is not a valid size for h.264.  It must be 1920 x 1080.  The monitor on which the file is read is rotated 90 degrees to make it oriented vertically.

  You must simply nest 1080 x 1920 model within a model of 1920 x 1080 and rotate 90 degrees.  Don't forget to choose the direction in which you turned previously.

• View my pictures with a black border?

  When you edit a photo, in that it appears a black border that one I find it really increases my photos.

  As I browse through photos in an album, I want to see with the same black border.  I think it improves their and would help me to decide which photos to keep and throw away.

  I can't find a way to use a black border, it is just white.

  

  This is not a feature of Photos - suggests to Apple - http://www.apple.com/feedback/photos.html

  LN

• Photosmart 6510 print with only black print cartridge?

  Hi, can printing Photosmart 6510 in black & white (not gray, but b & w only) when the black ink cartridge is not empty, but all the other cartridges are? If the color cartridges are not already installed, it will always show b & w?

  Hello

  The 6510 PS will not work if the color cartridges are empty but the black ink.

  However, I think that it would be possible to print using only black ink but to do ink in the cartridges of colour as well because in case of maintenance color cartridges to do little ink in the print head maintenance routines.  When the head is friendly if there was no colour ink this part of the print head could heat upward too or overheat.

  Anyway, back to print in black only.  You mention that you do not want t p rint in black and white so you know where to look in the driver to get to this option. Then in Word, Excel or any program, go to the print function.  Click on properties. Click Advanced. You should see where you have levels of gray.  If you clock in the option box should reveal the other options will be "Black Only". Select this option.

  As I said you should be able to print using only black, but you will need the color cartridges ink.

  Hope this helps.

• Black border around all the images from my video.

  I'm new to the forum here and am struggling to find an answer to my problem and I was wondering if someone could help me. I use elements adobe first 9 create a photo slideshow.  I have about 90 photos, with several of them and audio text throughout all this.  I don't know very well this program, I used it once to make a video.  When it's over, I burn it to a dvd.  The problem I have is that when I burn it to a dvd and play in my dvd player, the photos are of size reduced and there is a black border around them (all 4 sides).  Do you know what I can do to make it go away?  The last video I had not so I'm not sure what I did with this one.  And I tried to compress images and it changed nothing.

  Thank you very much!

  Alisha

  Lish8,

  If some of the stills are smaller than the size of the frame of the project, you will want to either their scale exactly, if required for the extensions to match, or you want to use the default size of the image scale, but take note: scale to the size of the picture by default dimensionnera only the size of fist to the rider, so if the Ratio of Aspect is off say that Images are in 16:9 and image of the project size is 4:3, you'll still have a few black bars.

  If the Images are close, I would say that you are using the fixed effect > Motion > scale, to increase the scale, so that the scope of the draft framework is filled on all sides. It will be actually reframe the view of the stills to the Aspect Ratio of the size of the image of the project. If you don't harvest like that effective, simply adjust the fixed effect > Motion > Position, to get a better harvest.

  The holds of same for still Images, which are a bit larger - I would manually scaling those to match the project frame size.

  That's why Steve recommends a slightly larger Image, that the size of the frame of the project - it gives you a bit of room for manoeuvre, in the final scale and Position.

  Good luck

  Hunt

• Can I print with only black print cartridge (color those missing)?

  Hello everyone and happy new year.

  Due to the fact that I have does not print in color, I decided to give my old and empty color cartridges for recycling

  the store where I buy them since then, and I bought only the black one (the double).

  I want to talk about 364 cartridges, I have a HP Photosmart B110a.

  The thing is that I get the message on the printer screen saying that the color cartridges are missing

  and even though I have the black one installed and I chose to print something only in black ink

  It cannot print anything.

  Y at - it a particular setting that I have to do, or it is a fact that I can not only print text, even if I chose

  the black cartridge? Each of the four ink cartridge must be installed to print only the text?

  Thank you in advance.

  The Photosmart b110a a ink cartrdiges individual and a separate print head.  To keep the print head don't dry out, you need to have all of the cartridges installed.

  Here it describes how the ink is used in inkjet printers.  In the terminology of this document the b110a is an IIC printer.

• print only in black and yellow on the officejet pro 8500 Inc. has

  Hello

  I installed recentlly hed all 4 cartiges for my printer.

  all cartiges 940XL ginuine.

  It is not the first time installation and never problams hed.

  now I tried to cleen the printhead in the menu priter and allaigen printheads.

  allaigen faild and still only print in black and yellow...

  

  Help me please...  (Sorry for my bad English).

  Your printer has 4 color cartridges and 2 heads print, black share one and the other for the other two colors.
  If cleaning print head does not help, probably time to replace the print head: http://support.hp.com/us-en/document/c01623635

• How to print a book on both sides of the page with the zoom.

  Hi I have a book of 100 small pages in book format and I want to print this book on both sides of the paper with two pages per side.

  I use windows XP and adobe acrobat reader XI version greater than 11.0 and an old printer.

  I tried to do and print two pages on one side by selecting multiple option in the layout, but there is no zoom I mean very tiny were printed and the remaining space was wasted.

  Then in order to print the even pages on the one hand and the odd pages on the other side, I tried to print the odd pages first in vain, I mean that all pages have been printed by also including the odd pages.

  For this I followed the instructions on the next page

  http://howtoprintdoublesided.com/how-to-print-double-sided-PDF/

  Please suggest how the two above can be carried out at the same time.

  Kind regards

  Rupesh.

  Hi Rupesh,

  To print the file to the scale, you can set the value in % in the impression under custom scale option dialog box.

  For double-sided printing click the properties button next to the printer you selected.

  Here you will get all the print properties that a printer supports.

  You can choose to print both side if it is available.

  Thank you

  Abhishek