Printer 65000A problem: not all colors print.

Similar Questions

• PSC 950xi and Windows 7 problem: not all pages are printed

  This problem has been reported by other at least 2 x in the past, go back for 2010, but there is no satisfactory solution that worked for everyone.  A real difficulty should not be available now?

  My PSC 950xi printer works perfectly with Windows XP.  Then I got a new laptop with Windows 7 and the 'good' HP driver has been installed automatically, as described in your Web site.  But now most of my impressions are incomplete; only the first part of the document is printed, and the last printed page is reduced by half.  Sometimes nothing prints. "Error" appears in the print queue, and I have to cancel the document to even try another impression (which then often does not work). I tried reinstalling my driver, as explained by HP, but without success

  A user suggested defining the "printer" HPCPP118 (RAW data type) processor (printer properties > advanced > Print Processor).  It worked for him.  However, it is not possible for me (and at least one other user) because the only available print processor is winprint.

  I hope you can help.   PSC 950 is not on the list of printers HP can't stand not (at least not on the list I've seen online)

  It seems to have solved the problem (1) Control Panel/hardware and Sound/display devices and printers, then right clicking on my printing device and select remove device. T (2) with printer, I unplugged my USB connector and then plugged back in and Windows 7 found the right printer driver automatically. (3) I had to wait a period of time (less than a minute) for the printer (re) - added to appear as the device by default and with the right image. (4) I never chose "Add printer" at all; Windows 7 was able to add a new when the USB connector is connected.

• Brand new hp 5520 will not all colors print

  Got a new hp5520 and he was installing tonight.

  The only color it prints is black, even at testpages printers.

  Status report is only to show a line to black.

  State of ink on the screen is everything to the maximum.

  openings checked and cleaned the heads but still nothing.

  How can I get this thing to work?

  Changed to a new and get it running in minutes

• Scrolling group problem: not all the group with scrolling content?

  Helloooow peoplez script wise.

  I was biting my nails on this problem, the last two days and still have not found a solution. Go here:

  I tried to make a window (or Panel actually, because ultimately it must be run from the EI > window > scriptname.jsx), with a scroll bar, which can scroll content in a group beside him. I can get the scroll and all group, but is the problem, just now, that the elements of x in the group, the last get cut. Like this (it is supposed to be 500 buttons):

  

  The only way that I was able to get the 'internal' group grow is by not using do not align properties and manually set the .size. I know that the content is here because the last element arises, when I move the last location of points [1] upwards until he reached the top of the group. I tried to refresh the page layout (layout.layout (true); layout.resize (()) to each call of the function onChanging() of the cursor, but without success. Read a lot of forum posts beautiful and discussion by @Marc Autret and other users of scriptUI/extendscript long has this far been without success.

  TL; DR: I'm doing a group with a lot of content that I can scroll with a scroll bar.

  Here is the code snippet, I hope fairly well commented:

  {
  //scroller test
  // uncomment the temp path (replace with some image file path) and the lines inside the populateGrid() function to reproduce my problem better
  // I'm ussing an image 512x288 pixels
  
  
  //var tempPath = "/Volumes/Verbinski/02_SCRIPTING/After_Effects/stockholm/ROOT/EXPLOSIONS/Fireball_side_01/Thumbs/Fireball_Side_01_024.jpg";
  
  
  // create window
  var mWin = new Window('palette');
    mWin.size = [500,500];
    mWin.orientation = 'row';
  
  
  // If you like it, then you better put a scroller on it.
  var scroller = mWin.add('ScrollBar');
    scroller.size = [20,mWin.size[1]-40]
    scroller.minvalue = -5;
    scroller.value = scroller.minvalue;
    scroller.maxvalue = 10000; // tried changing this to all sorts of interesting numbers.
  
  
  //This should move the group, created further down.
  scroller.onChanging = function(){
    grid.location = [grid.location[0],-scroller.value];
  }
  
  
  // "Boundary" for grid (see below)
  var gridArea = mWin.add('panel',undefined,'gridArea');
    gridArea.size = [mWin.size[0]-40,mWin.size[1]-40];
  
  
  // The grid... a digital fronteer... and also container of stuff
  var grid = gridArea.add('panel',undefined,'grid');
    grid.size = [gridArea.size[0]-20,9000000000] // no matter how high I put this, it doesn't change a thing
  
  
  // Just an array for all the images to go
  var clips = [];
  // Total height gets calculated in the populateGrid function.
  var totalHeight = 0;
  
  
  function populateGrid(rows){
    var img;
    for(i=0;i<rows;i++){
    // img = grid.add('image',undefined,tempPath);
    // clips.push(img);
    grid.add('button',undefined,i);
    }
    for(i in clips){
    clips[i].location = [0,(clips[i].image.size[1]*i)]
    }
    // totalHeight = (img.image.size[1]+grid.spacing)*rows;
    // grid.size = [grid.size[0],totalHeight]
    // scroller.maxvalue = totalHeight/2;
  
  
  }
  
  
  // put x number of buttons/images into the grid
  populateGrid(500);
  
  
  // shwo to window
  mWin.show();
  mWin.center();
  }
  

  Reaally hope someone here sees this and can help out me.

  Cheers, Fynn.

  My Control Panel:

  retina 5K, 4 GHz Intel Core i7 iMac

  32 GB of RAM, 512 GB SSD HARD drive

  OSX Yosemite: 10.10.4

  AE: CS6 |  CC 2014: 13.1.1.3

  Aaalrighty, guys. It seems to me have cracked... Sort of...

  David, your version worked quite well, I just modified a bit to get the right calculation.

  The wheel now works as expected and the scroller.maxvalue is calculated as ((number of items) * height of the first item).

  Everything works fine until I have started using the automatic layout manager. The option 'fill' at least makes it really hard to understand the final height of the internal objects. So they must be defined accordingly.

  Indeed, here is my modified code (sorry, @David for resources according to the version string, you may simply copy the scroller.onChanging () and populateGrid() x parts))

  {
  //scroller test
  // I'm using an image of around 512x288 pixels
  
  var tempPath = "YOUR IMAGE HERE";
  
  // create window
  var mWin = new Window('palette');
    mWin.size = [500,500];
    mWin.orientation = 'row';
  
  // If you like it, then you better put a scroller on it.
  var scroller = mWin.add('ScrollBar');
    scroller.size = [20,mWin.size[1]-40]
    scroller.minvalue = 0;
    scroller.value = scroller.minvalue;
    scroller.maxvalue = 3000; // tried changing this to all sorts of interesting numbers.
  
  //This should move the group, created further down.
  var scrollDiary = 0;
  scroller.onChanging = function(){
    var scrollVal = Math.abs(scroller.value)-scrollDiary;
    for(i=0;i		   

• All of a sudden I lost the rigt on most (but not all) color jpg or gif in some web pages. It seems that there are only 8 or 16 colors. The last installed software is LastPass.

  I reinstalled the version 4.01 thinking 5.0 could be the problem. No difference. On the same pages, IE shows no problem.

  This may be due to a problem with the profile for your monitor screen colors or color profiles embedded in images.
  
  You can disable color management to test this.
  
  You can set the pref to 0 on the subject gfx.color_management.mode: configuration page to disable color management.
  
  You have to close and restart Firefox for the changes to take effect.

  See:

  • http://KB.mozillazine.org/GFX.color_management.mode

• 5512: 5512 printer will not print black - 3 of all colors print correctly

  Hello

  The 5512 will not print black.  New cartridge installed.  Clean print head run more than 5 times without problem.  There was many 5512 'no black printing problem' not noticed on this forum with many courses of resolution.  I followed the instructions found on so many comments, but unfortunitely, the problem still exist.  I noticed there were some done private view so I don't know that there is a similar problem that needs to be processed offline.  Thanks in advance for any help provided.

  Thank you all for the suggestions.

  Nothing has worked for don't solve the "no black ink.

  So, I took the print head of cart and carefully protected the small circuit board on the back side.  There is a large accumulation of ink on the bottom of the Assembly.  I sat the nozzles at the bottom of the distribution of very hot water and allowed some time to soak.  From there on, I used carefully some fabric material and q-tips to wipe the nozzles.  Then I got very hot water, and he ran to the top of the side of the Assembly to the screens and through the nozzles.  This effort lead to a very large discharge of ink black and color.  I dried the Assembly and reassembled the transport to the printer.  Placed all the cartridges back in, ran clean printhead once and then guess what? the printer now prints black and color inks better than he has in years.

  Total time needed to perform this cleanup was less than 30 minutes from start to finish.

  Good luck to all of you who have this problem.

  Before the rampage of the printer, it is interesting to try this fix.

  Good luck!

• Kodak esp 5250 does not print all colors

  I have a kodak esp 5250 all in one printer I put new cartridges in however and not print all colors.  I tried aligning the printhead and clean.  What else is the problem?

  I tried to print a test page and some colors are missing.  In addition, it lacks striations.   Yes, the band was remove new cartridges.

  Well, - if you printed the demonstration outside of Windows (directly from the printer) page and there is lack of colors - this is not a software problem - but a material one.  Contact Kodak or try different cartridges.

• How can I get my Canon i550 printer to print with all colors. Cleaned and aligned and there are a lot of ink, but do not print correctly.

  Print all colors with the exception of cyan, so blue and green print under rose.  I have cleaned the nozzles according to the instructions, there is a lot of ink in each cartridge and it worked a few days ago.

  Hello

  Check with Canon support, their documentation and online drivers. As Canon OEM is responsible for
  for the proper functioning of the printer and drivers provided.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  I hope this helps. Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Deskjet 6122:6122 prints all colors

  My HP 6122 printer prints all colors.  I put new cartridges in three.  Printed black and blue only.  Another print clear yellow, pink and black.  A black and in some parts of the document print prints a pink light.  I cleaned the cartridges and also cleaned a part (don't know the name) inside the right which has 4 grooves.  He had many top ink and I can see at the bottom of the printer when there seems to be a lot of ink.

  Any suggestions on how to solve this problem.  Our State is no more long to individual printers at our offices; only network printers.  However, if we have one in our office we can use it until it no longer works.  I won't give up on this printer.

  In addition, if color printing cannot be resolved, is there a way so that it will print in black only.  I tried to find where it change but had no success.  Our COMPUTER technician could not help...

  Thank you.

  You could try printing in grayscale: HP Deskjet, Officejet and Photosmart printers and all-each change of printing in Windows 7 settings.

  Black and white printing under Windows 7

  1. In the program you are using to print, click file and then click on print. The print dialog box opens.

• Blue print in all colors

  Good evening, everyone.

  I have a printer J4680 AIO that I had for a while. Last night, I installed the new ink and ran a test page and it looked ok, but when I went to print a chart, I noticed that the colors were COMPLETELY shut down.

  I went online and print a test page which includes all colors including shade and hue of these colors.

  The result is... interesting...

  The yellow is a lime.

  Red is a deep blood red

  Magenta is magenta, but deeper... almost purple in hue

  Black is fine

  The Green is very good.

  Blue is fine

  Cyan is fine

  What it boils down to, is that cyan is printing in all colors.

  Anyone had this happen and have any idea of a resolution for this? I do a lot of graphic design and when I am doing a project that does not require my printer super high resolution (aka REALLY expensive of ink), I need it to be precise.

  EDIT:
  I should mention that I use ink official HP (901) so I know it is not the question (or shouldn't be).

  Be troubleshooting steps described here can help, it seems that you have in the mixture of the color cartridge.  It is unlikely that running a cleaning cycle will solve this problem, you will probably need a new cartridge.  You can check the warranty on the cartridge (valid even if the printer is no longer guaranteed) as indicated in the paper here.

  A new cartridge will almost certainly fix the problem.

• printer is, BUT only with black and blue, all other diagnoses print with all colors

  Initially, the installation of the printer REFUSED to align, took 7 attempts (OK, I've heard of Einstein quote!). Whenever I used the printer to ALIGNER PRINTER screen - the process has failed. So I looked on the web, and:

  Clean the cartridges,

  Erased the vents

  Removed and cleaned the print head

  Prayed

  Tried again

  To nothing not done, so I tried to make the diagnosis via PC software and here deepened the mystery.

  When the HP Photosmart B210 series Toolbox running I got three different results between the three print options

  A Diagnostics Page of print quality gave me five Ba's maximum color printing

  Align the print heads gave me the black and blue boxes/lies/grids and the message alignment successful

  The print Diagnostic information gave me all four colors with a lot of useful info, including the print head 73 calibration trust level: 0

  Ideas anyone, before I bin it and buy a Kodak or disgusted Epson

  What exactly is the problem?  Alignment aligns the print head color to the black print head, and black and one color (cyan for your printer) are required for this.  (There is probably an extra set of blocks that prints gray blocks fade to white.  This section is used to calibrate the energy for the colors).  The other test pages that you printed will be print various diagnoses or test pages that will use all colors.

  A successful alignment page requires the page be printed on white paper not used and requires that the cyan and black sections print correctly.

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

  Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

  This looks like a printhead clogged for me.
  It's more of an Epson problem than a problem of Windows.
  Check the Web site of the Epsom for utilities seeking to lead the printheads.

  Here is a link to the CX6600 troubleshooting page:
  <>http://www.Epson.com/cgi-bin/store/support/erscripts/start_er.jsp?BV_UseBVCookie=Yes&OID=41664 >

  HTH,
  JW

• All colors but black yellow print

  I'm printing to a QuadCore intel mac running 10.6.8 an HP2600n from a few days ago, each doc print from my mac for this printer that has all colors other than yellow what looks black. It happens with all programs and MS Word documents, Preview & Acrobat. They look fine on the screen, but don't not when printing. If I send a doc to my colleague, it can print from their computer very well.

  I installed the drivers for the printer, but it did not help. Any suggestions?

  Thank you!

  Ok

  what you can try is to remove the old driver software print and then replace HP driver by using the Apple software updates.

  Open preferences system, print, and fax - and command, then click the name of the printer queue.  System should ask if you want to reset the printing system.  I do not know if you have any other connected printers, but be aware that if you say yes, it will remove all your queues from the printer and the driver files.

  If you deleted files (reset) the printer driver, then you can "Add printer" and the system should prompt you to download driver from Apple

  the process above it seems you reasonable?

• I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times unt

  I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

  lrfrustrated wrote:

  I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

  Print > save as PDF - use an excerpt (part of Mac OS X), so Adobe Reader should have no effect on that at all.

  As for the error "file corrupted", simply uninstall the Reader app will not affect it. Follow these steps:

  Mac/HD/Library/Internet Plug-ins

  

  Trash the files AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin

  Mac HD/Applications

  

  Trash the application Adobe Reader

  [user] / Library/Preferences

  

  Trash the com.adobe.Reader.plist file

  To access the [user] / Library, hold down the 'Option' and click on 'Go' in the FInder menu.

  Mac HD/Library/Application Support/Adobe

  

  Trash the drive (full record)

  Empty the trash.

  Download the installer FULL here: http://get.adobe.com/reader/enterprise/

  Quit your browser, and then reinstall the drive.

  Run it from the Applications folder and agree to the license agreement.

  You should have no problem with Safari PDF files download.

  Unfortunately, ANY PDF file that says it is damaged.... You will need their trash.