Printer drivers Kodak settles "Operation cannot be completed.

Similar Questions

• Cannot set MG3150 Canon as a printer by default-error code 0 x 00000709 operation cannot be completed

  Original title: CANON MG 3150, SET AS DEFAULT

  I am trying to set my Canon MG3150 as a default printer on Windows 7 32 bit Edition home premium.  But I get an error code 0 x 00000709 operation cannot be completed. Double check the name of the printer and make sure that the printer is connected to the network.  How can I fix this as I am a home user and not on any network.

  Hello

  Have you done any book to the computer before this problem?

  I suggest you try this method and check the status of the issue.

  Method 1:

  You can also try temporarily disabling computer security software and check.

  Disable the antivirus software.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Open, run the printer Troubleshooter and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:

  Create a new user account and check the status of the question...

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Also see the manual of the printer for more information.

  For reference:

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

• The operation cannot be completed because you do not have the necessary permissions.

  The operation cannot be completed because you do not have the necessary permissions. This is the message I get when I want to create a new folder. I don't have this problem until recently. 1.

  How should I do?

  2 is that there is a security breach?

  I use sierra but, I had the same problem with el Capitan

  When you try to create a new folder? is it an external device? your office? a NAS?

• Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

  After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

  Aren't these photos on the desktop 'copies' of the originals in the Photo?

  All wise users out there with an answer?

  stop, disconnect all external devices

  Restart your computer in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  empty the trash after checking the files in there are of no use to you

  arrested again

  Reconnect the external devices

  reset.

• I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

  I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

  Are all the other apps open while you try to do this?

• Microsoft Money - when closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.

  I use Money version 1105, 2004 updated.  I have 2 qusstions-

  1. in closing down, it saves ok but there is a message saying that the operation cannot be completed.  I then use the Task Manager to complete.

  2. is there a version of Money that runs this file?  I tried Sunset but does not recognize my file.

  Any help would be great, thanks in advance

  Eric

  For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.

  Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.

  Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.

  Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922

  Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915

• Operation cannot be completed

  New to adobe and need assistance products. Migrated from Aperture (RIP)

  Info

  10.10.5 osX

  Photoshop CS6

  LR6

  Canon 5diii

  When I open the bridge I get the message "operation cannot be completed" I downloaded the update (its an update old) nothing works

  I can not also change in CS6 when I LR6... All these problems are not present on my office iMac and the system works flawlessly. Only on my macbook pro.

  Help!

  Thanks in advance.

  Thanks for the update. Here's what you could try

  I can not also change in CS6 when I LR6.

  Make sure that Photoshop Cs6 is fixed as a publisher of primary Lightroom.When you right-click on an image, you should see "Edit in Photoshop CS6"

  If you see a different version instead. Add Photoshop CS6 in the External Editor

  Go to Prefereces > external editing > additional External Editor

  Choose Photoshop and click OK

  Alternative is to reset the preferences for both Photoshop and Lightroom so that they can have these parameters automatically

  How to remove/reset the Photoshop preferences

  Reset preferences in Lightroom CC/6 | Lightroom blog

  * Save your settings in Photoshop and catalog in Lightroom before you reset it.

  If the problem is still the same reinstall Lightroom 6

  "The operation could not be completed" bridge CC

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  Go to ~/library/Application Support/Adobe = User Library directory [ not to be missed ~ symbol ]

  Also, go to the folder /library/ Application Support / Adobe = system library

  When you open GetInfo option for Adobe folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Impossible to install Brother printer (even with the latest drivers for windows 7). I suspect it's other print network drivers. During installation, the Brother software reports "the operation cannot be completed (error 0 x 00000706).» The print processor

  I upgraded from Vista to Windows 7
  When I try to add the printer manually, I can't select all ports.

  Plug the printer causes Windows to try to install a driver, but it fails.

  I suspect it was due to my University Pharos printing system. (It worked when I updated from Vista). After that I installed Win7 and started having all these problems, I was unable to uninstall due to errors of RPC ports. So I deleted manually and deleted all the registry entries.

  Installation of a Brother printer still does not work.

  Is anyway to reset all the settings of the printer? Wipe the slate clean? To restore all network ports?
  Thank you!

  ===
  Edit: I read other entries... My Printer Spooler kept crashing before and I had to restart via services.msc
  Also ran sfc/scannow without error
  Edit: I have since deleted all other printers listed in the management of printing, restarted, but still there is no listed ports.

  OK, I found the solution. It turned out that all my print processors and ports have been replaced by the Pharos system (used by my University to charge for printing) DLLS. After the upgrade from Vista to Windows 7, it did not work.

  They have become like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  «Pilot '=' "PSS08B07."» DLL.
  "PSDriverLink"="winprint.dll".
  «C:\\Windows\\system32\\spool\\PRTPROCS\\W32X86\\PSS08B07 "=" PSDriverPath "."» DLL.

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\USB Monitor]
  «Pilot '=' "C:\\Windows\\system32\\PSS08B05."» DLL.
  "PSDriverLink"="usbmon.dll".
  «C:\\Windows\\system32\\PSS08B05 "=" PSDriverPath "."» DLL.

  etc...

  ============

  Manually, I changed ALL the print processors, drivers and ports in CurrentControlSet, CurrentControlSet1, CurrentControlSet2 to their original values and deleted the Pharos irritating ones.
  i.e.
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint]
  "Driver"="winprint.dll".

  etc...

  restarted and it worked!
  Too bad, the troubleshooting of Microsoft tool could not detect it.

  See you soon!

• Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• {The operation cannot be completed because the item "sauerbraten_2013_01_26_collect_edition_macosx.dmg" is in use.} appears when I try to empty the trash. It clearly refers to a set of type "shooty" I thought I had removed 12 months ago. Any ideas?

  Old-fashioned persists!

  Make sure that it is unloaded from the side bar of the Finder.

• Windows 10 in save for Web, "the operation cannot be completed the directory name is incorrect.

  There are a lot of answers for Mac and Windows 7-8, but none that I can find for Windows 10. It is not let me save for Web and I get the message, which is in the title of this discussion. I tried to reinstall it. I tried pressing Ctrl + Alt + Shift, did not work. I know this is probably a registry problem, anyone got any ideas?

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Illustrator CC 2015, after the upgrade from 2014 CC, crashes when opening program/opening file. Says error: operation cannot be completed due to an unknown error. [IMPORTANT]

  In addition, after the opening of the program, he showed an advisor to remove one of the swatches plug-in library, which I did, and it did not help. I tried to uninstall too no effect.

  Please, some advice. I use Windows 8.1

  Solved the problem in a logon session. Uninstalling and reinstalling solved the problem.

  Sanjay.

• Moving backups Time Machine - the operation cannot take place because the backup item is not editable

  I want to change the external hard drive that I use for my time machine backups. I went through the steps listed here:

  Time Machine: How to transfer backups from a current backup disk to a new backup drive - Apple Support

  It seems to work correctly. I shot TM back and adding the new drive. TM is now backing up files on the drive up, but there is a problem.

  For some reason, TM has begun to put backups "freely" for lack of better in the external hard drive, and not in the backups.backupdb folder for a week, then returned to save them in the backups.backupdb > ComputerName > files from backups. So in other words, when you click on the hard drive in the finder, it opens the player and you see a folder named Backups.backupdb and then a bunch of mixed in which files are backups time machine named 2016-01-24-XXXXXX, etc.. When you go to the folder Backups.backupdb, there's a more random "loose" time machine backup file 2016-01-23-XXXXXX, and then another folder with the name of computers and in the folder are all TM backups except loose ones I mentioned earlier.

  It seems that TM is working properly now, but I don't know why he put the files from the first days outside the backup folder. However, when I do drag, I get the error:

  The operation cannot be completed because backup items is not editable

  I want to just put all the files in the right folder so that I can A) keep my disk organized and (B) ensure what TM can find everything correctly should I have to go back.

  No idea what is happening and how to fix it?

  Although the documentation Apple says you can copy Time Machine backups in the Finder, it is very slow and sometimes does not.

  This technique works only if the volume that you copy to the same size or larger that that you are copying to.

  First of all, please open the Time Machine preference pane and click the Select Disk... button. You may be able to unlock the settings first, by clicking on the padlock icon in the lower left corner of the window. Log in as administrator.

  Remove the volume you want to copy in the list of backup destinations. Then turn off Time Machine.

  Launch disk utility, open the built-in Help and search for the term 'Double '. Follow the instructions. All existing data on the destination volume will be deleted. That shouldn't be a problem, because you do not want to mix non-sauvegarde and backup data on the same drive anyway.

  If the volume you are copying has been encrypted by Time Machine, you must first unlock it. Click the release button in the toolbar of the disk utility window.

  Turn Time Machine back on and select the new volume as a backup destination. Alternatively, you can continue to use the old volume, if you wish. Both will be alternated when both are available.

  ATTENTION: If you copy the volume is corrupted, as shown by the ERD or first aid in disk utility, while corruption is copied to the new drive. Do not copy data from a damaged on a faulty disk volume. Put aside the reader and do not use until you don't know that you no longer need the data. Then securely erase it and bring it to a recycling center. Do the same if the restore operation fails with "disk errors."

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.