Printer e-all-in-one-HP Deskjet 3520

Similar Questions

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• HP Deskjet all-in-one: HP Deskjet 3520 will not print black, period

  OK, I've lost my WHOLE day, searched forums, has done what others have tried, poste posted HP Facebook, doing whatever is humanly possible to get my printer to print in black. I ran the clean printhead, black ink changed TWICE new cartridges, reloaded drivers, reset the default open to the top of the printer and tried to manually clean the head after only 4 hours to do everything I can possibly do to get this junk to print in black. The printer is only a year old and the cartridges are freshly bought from the store. So, tell me what am I missing or is the printer ready to be stoned?

  Hi @ChrisBird,

  Welcome to the HP Forums

  Looks like you've covered most of the steps, but I will propose always to have a look through this document printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series to ensure that you have verified that the event on both cartridges.

  If this does not help still nothing and will not always be the black print, please call our technical support team and request a replacement printer. At THAT TIME, regardless of the warranty, they should be able to establish that the replacement for you. Otherwise, let me know and I'll do my best to help you with a resolution.

  The pleasure of you talk to soon!

• HP Deskjet e3520 all-in-one: HP deskjet 3520 scan now

  The printer works fine but the scanner is turned on and off.  He had worked and now it says "connection error computer does not."  Verification is the usb cable is connected or wireless is working properly. Then try again".

  The printer works so should not work scanner too?  Help!  It's so frustrating!

  Hi @sbg15,

  I read your post and see that you are unable to scan by a USB connection. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Deskjet 3520)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Please, try the following steps to see if it will help solve the problem. You will need to follow the documentation 10.9.

  A "computer not found" or "Connection error" message for HP Deskjet 3520 e-all-in-One Printer Series.

  Let me know if you were able to scan through the Apple Image Capture or Apple Preview.

  If there is anything else I can help you, let me know. Thank you.

• Messages e-all-in-one-HP Deskjet 3520

  Just installed HP Deskjet 3520 e-all-in-one (new, bought at HP online). I did the whole upward with the head alignment, etc. in accordance with the instructions.

  Every time I click on 'print' on any document, web page or something else, I get the message on the computer screen should I align the print heads (choices are align; Are not aligned; Cancel Print, help). This a step further, ridiculous to have to monitor and take care of for each print job.

  In addition, the screen of the printer itself tells me to add paper even if the bin is almost full.

  These measures were certainly appropriate when I was put in place of the printer. Now, they are annoying and should no longer appear. Any suggestions on how to teach the printer to 'do' and just print?

  Hello murray2,

  I understand that you have a few messages telling you to load paper and complete alignment. I can understand how this can be frustrating, especially when it's a new printer. What I would say is first, with the printer remove the power cord at the back of the unit. Then disconnect the power cord from the wall outlet. Once both ends are disconnected, please press and hold the power button for 30 seconds. This will ensure that all power in the printer is completely empty. Plug the power cord directly into the wall (not a surge protector) first, then to the printer. Return-turn on the printer and allow it to carry out the necessary maintenance.

  Once the repair has been completed, press the ePrint button just to the left of the switch. Then select Product Updates. Once the updates, try to print again.

  Please let me know if you still get the message, thanks.

• Printer e-all-in-one-HP Deskjet Ink Advantage 3525

  This printer has on board the OCR capabilities? If yes how can you launch?

  Hi JannieV,

  I understand that you have a Deskjet Ink Advantage 3525 and wonder if it built in OCR capabilities. I will do my best to help you with this.

  Your Deskjet Ink Advantage 3525 does not come with the OCR of HP software. What you can try is download the software for one of our printers Officejet (an Officejet 8600 for example), run the installation software and regarding connection options just choose connect option later. Then, the OCR software is installed on your computer and you should be able to scan using the OCR software.

  Hope this helps, have a nice day!

• my HP Deskjet Ink Advantage 45: my compatible printer ink e-all-in-one-HP Deskjet Ink Advantage 4515

  We got my HP Deskjet Ink Advantage 4515 e-all-in-one printer from abroad and it is initially with ink jet 650 but when we checked, it is not available on our space, it is listed on the Web site that 678 as its compatible ink. It is safe to assume that 678 inkjet will work on our printer? Help, please.

  Hi @flyingknee,

  Welcome to the community of HP,

  I understand that you are looking for a compatible with your HP Deskjet Ink Advantage 4515 ink cartridge, and I'll be happy to help you.

  I found this picture on the HP site that shows the different cartridges compatible with the HP Deskjet Ink Advantage 4515 e-all-in-one printer for the different regions.

  Source

  Series printer e-all-in-one-HP Deskjet Ink Advantage 4510

  The following table shows the information of ink cartridge for HP Deskjet Ink Advantage e-all-in-one 4510 Printer series.

• I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  I want to print black and white with empty color cartridge. My model is all-in-one HP Deskjet 4288.

  The Deskjet F4288 joined the printheads on the ink supply.  These are replaced at each change of cartrdige so there is no concern about printing empty color or black cartridges.

  You should be able to print in ink entry mode "backup" by removing color (or black, but not both) cartridges.  There will probably be a warning message about ink backup mode but you should be able to print and the printer will work regardless of the cartridge is available.  In handwritten backup with the only color black cartrdige mode areas will print in shades of gray.  If print ink backup mode only the installed color cartridge then black will be printed by mixing colors.

  See page 75 of the manual here, that says:

  Use the entry ink-backup mode
  Use ink-backup mode to operate the HP all-in-one with only one cartridge. The
  ink-backup mode begins when an ink cartridge is removed from the print cartridge
  transport. During the ink-backup mode, the product can only printing from the computer.
  You cannot start a print job from the control (such as copying or scanning a Panel
  original).

  NOTE: When the HP all-in-one device works in ink-backup mode, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

• All-in-one HP DeskJet 2130: all-in-one x 2 align

  I can't get an alignment page printed with my printer all-in-one HP DeskJet 2130 new (just out of the box).

  I have installed two ink cartridges, loaded paper and did not get an automatic alignment page print as the directions say I would. I put a piece a document on the glass of the scanner as shown and then press the START COPY BLACK button nothing works. The book comes out just of Virgin. I do the same thing with the button COPY COLOR START, get the same results.

  I turned the printer market twice, installed the printer software and tried again... still a blank alignment page.

  I used the new ink cartridges, not supplied with the printer... could they be defective? Any ideas? Thank you very much!
  
  (Wireless Internet connection, if it matters.)

  Hi @TillyBonsall,

  Welcome to the HP Forums!

  I read your post about how you get a page Virgin alignment with your printer HP Deskjet 2130. I'm happy to help with this alignment problem.

  What happens if you try to print a self-test page? Print a self-test Page.

  What operating system you use, Windows or Mac? What version? https://www.whatsmyos.com.

  In the meantime, please, try the procedure described in this guide, "Alignment failed" Error Messageand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• All-in-one HP Deskjet 2060 K110 series does not scan

  The power button of my K110 series all-in-one HP Deskjet 2060 is always enabled. Also, a doen't work scan. What should I do? Thank you!

  Hello

  You can try uninstaling your printer and then reinsert.

  Use this HP link > put in your operating system > follow through the following Web page > he'll be correct that information it tell you how to make and also how to get the right Drivers to install.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4157336&LC=en&cc=us&DLC=en&lang=en&cc=us

  If you can't fix it according to the information here, contact HP support.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.

• HP Deskjet 1510 all-in-One -: HP Deskjet 1510 all-in-One - scanner not recognized

  Establishing another laptop for my all-in-one HP Deskjet 1501. The printer works well, but I do not see the scanner information pop up. With my other laptop, he did. One reason why the scanner is not recognized? Thank you!

  Hello escada48,

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

  However, you can see the printer on the desktop icon you. Click it to open the Printer Wizard , and then click the Scan Picture ready.

• All-in-one HP Deskjet 6310. Win 8 64-bit on ASUS Q200e.

  All-in-one HP Deskjet 6010 is loaded by Microsoft. If this isn't the case, HP driver on the HP site will include HP Solution Center similer to the driver for XP? And HP Photosmart first will be responsible as well?

  I'm afraid there is no way to get a CD with the drivers and software for Windows 8.  The only option is to download.  Normally the download will have the same software that the CD anyway, if you're not losing anything by installing the printer in this way.  I'm not sure that all software is delivered with the latest software, but it should be more, if not all of the software you got with previous versions.

  HP Photosmart and Officejet Full Feature software and drivers

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• Cannot scan computer with J611 of all-in-one HP Deskjet 3050 a

  I use WIndows 7.

  I can scan from the all-in-one HP Deskjet 3050 a J611 assistance from the control panel.

  I was able to run a scan of the computer. But now when I select the icon on the desktop to my all-in-one HP Deskjet 3050 a J611, I see more scan options.

  Shane,

  I connected with a USB cable and everything works now. It is not convenient, but it's a solution. It's still a mystery as to why he's working for a few months and then suddenly stopped working.

  In any case, thanks for the follow up several times and find a work around.

  I'll provide Bravo and mark this thread as provided solution!